Structurally controlled hydrothermal dolomites in Albian carbonates of the Asón valley,Basque Cantabrian Basin,Northern Spain

Shallow marine carbonate sedimentation dominated during the Albian in the western part of the Basque Cantabrian Basin in Northern Spain, forming the large Ramales Platform. This platform originated on a less subsiding tectonic block facing deeper and more subsiding areas to the south and east, which were created by tectonic activity in the Basin. Fracture-related hydrothermal dolomites hosted in these Albian carbonates are well exposed in the Asón valley area. Mapping in the studied area revealed several dolomite bodies related to main faults that cut the stratification almost at right angles. The bodies show a vertical development along fault-strike up to 900 m thick from which kilometre-scale branches expand following the stratification. Dolomitization is pervasive and independent of the limestone facies. Main dolomite facies are fine replacive, sucrosic and saddle. Petrography, C, O and Sr isotopes and fluid-inclusion analysis support a polyphase hydrothermal dolomitization at fluid temperatures between 75 °C and 240 °C and highly variable salinity of up to 22 wt.% NaCl. Fine dolomite replaced limestone first and then, sucrosic and saddle dolomites replaced part of the first dolomite and cemented newly created fracture porosity together with different calcite cements. Zebra dolomites and hydroclastic breccias are products of this later stage. Burial analysis of the host rock supports maximum burial temperatures of 80 °C and intense tectonic activity from the Albian to Turonian with a latest Albian peak subsidence. Albian stretching of the crust and subsequent ascent of the isotherms in the area is suggested to have produced sufficient heat to the dolomitizing fluids. The structural analysis indicates a strong transtensional tectonic activity in the studied area during Albian to Turonian time with the creation of an overstep between W–E trending and N–S trending faults. Fluids moved from subsiding areas to fractured uplifted parts of the Ramales Platform, enhanced by diapiric activity.     

基于SVM的海底声纳图像底质识别*

对海底底质声纳图像分割,提取单元特征向量进行主成份分析,选取均值、标准差、对比度、相关系数、能量及同质性作为训练特征向量,优化支持向量机(SVM)参数.利用多分类 SVM 对砂、礁石、泥进行训练,有效、快速地分离出了3种底质类型,测试精度高于80%,表明该方法可有效用于海底底质声纳图像的识别和分类.     

Investigation of a longfin inshore squid's swimming characteristics and an underwater locomotion during acceleration

In the present study, locomotion of a real longfin inshore squid (Doryteuthis pealeii) was numerically investigated. Geometry of a real squid was obtained using computed tomography (CT) images. In addition to a two-dimensional axisymmetric squid model, a modified squid model with no cavities around her head and an ellipse shaped model were generated with a fineness ratio (the ratio of body length to maximum body diameter) of 7.56. These numerical models were exposed to an acceleration with two different velocity programs. Added mass and basset forces on bodies were calculated during acceleration of the squid models starting from rest. Pressure and viscous drag forces were also calculated due to pressure variation along the squid models and friction on the surface of the models. The effect of a nozzle diameter on jet velocities and propulsive efficiency at all bodies were evaluated when time dependent velocity profiles (from 0 to 10 m/s in 0.5 and 1 s time durations) were set for the inlet of computational domain. The modified squid model required least thrust force during acceleration phase of time dependent velocity profile compared to the other models while the 0.02 m nozzle diameter provided largest propulsive efficiency for all models.     

Pressure characteristics of bubble collapse near a rigid wall in compressible fluid

High speed liquid jet and shockwave can be produced when a bubble collapses near a rigid wall, which may cause severe damage to solid structures. A hybrid algorithm was adopted to simulate bubble motion and associated pressures near a wall combining Level Set-Modified Ghost Fluid-Discontinuous Galerkin (LS-MGF-DG) method and boundary element method (BEM). Numerical results were compared with experimental data to validate the presented algorithm. Jet formation was simulated by BEM and the induced pressure on the wall was calculated with auxiliary function. The pressure at the point on the wall where the jet points to reaches its peak value after the jet penetrates the bubble. Bubble collapse and rebounding were simulated by the LS-MGF-DG method. Shock-wave is induced when the bubble collapse toroidally to a minimum volume and the pressure at wall center reaches the maximum due to shockwave superposition. A third pressure peak is found associated with the bubble rebounds and bubble splitting. In the case studied, a higher pressure was found due to collapse shockwave than bubble jet and affects a larger area of the wall. In addition, the three pressure peaks due to jet impact, collapse impact as well as bubble rebounding and splitting decrease with the increase of the standoff distance.     

Structure and photosynthetic properties of phytoplankton assemblages in a highly dynamic system, the Northern Adriatic Sea

The photosynthetic properties of phytoplankton populations as related to physical–chemical variations on small temporal and spatial scales and to phytoplankton size structure and pigment spectra were investigated in the Northern Adriatic Sea off the Po River delta in late winter 1997. Large diatoms (fucoxanthin) dominated the phytoplankton in the coastal area whereas small phytoflagellates (mainly 19′-hexanoyloxyfucoxanthin, chlorophyll b, 19′-butanoyloxyfucoxanthin) occurred outside the front. The front was defined by the steep gradient in density in the surface layer separating low-salinity coastal waters from the offshore waters.Physical features of the area strongly influenced phytoplankton biomass distributions, composition and size structure. After high volumes of Po River discharge several gyres and meanders occurred in the area off the river delta in February. Decreasing river discharge and the subsequent disappearance of the gyres and the spreading dilution of the river plume was observed in March. The dynamic circulation of February resulted in high photosynthetic capacity of the abundant phytoplankton population (>3.40 mg m⁻³). In March, the slow circulation and an upper low-salinity water layer, segregated from the deeper layers, resulted in lack of renewal of this water mass. The huge phytoplankton biomass, up to 15.77 mg chl a m⁻³, became nutrient depleted and showed low photosynthetic capacity. In February, an exceptionally high P_max^B, 20.11 mg C (mg chl a)⁻¹ h⁻¹ was recorded in the Po River plume area and average P_max^B was three-fold in February as compared to the March recordings, 10.50 mg C (mg chl a)⁻¹ h⁻¹ and 3.22 mg C (mg chl a)⁻¹ h⁻¹, respectively.The extreme variability and values of phytoplankton biomass in the innermost plume area was not always reflected in primary production. Modeling of circulation patterns and water mass resilience in the area will help to predict phytoplankton response and biomass distributions. In the frontal area, despite a considerable variability in environmental conditions, our findings have shown that the phytoplankton assemblages will compensate for nutrient depression and hydrographic constraints, by means of size and taxonomic composition and, as a result, the variability in the photosynthetic capacity was much less pronounced than that observed for other parameters.     

Wedge impact with the influence of ice

This work presents a canonical study on a wedge entering water near a single piece of ice using computational-fluid-dynamics (CFD) and a Wagner-type theoretical model with corrections for non-linear effects. Calculations for a series of conditions with ice of different sizes and locations relative to the wedge are conducted. The hydrodynamic force due to impact, the pressure distribution on the wedge surface, and the pile-up phenomenon are examined to study the role of ice in the impact process. The theoretical model is shown to be accurate and can serve as a useful method to assess slamming loads under the influence of ice. It is shown that even for the case of a small piece of ice, the slamming force on the wedge can increase by 30%.     

Effects of stocking density on the growth and immunity of Atlantic salmon salmo salar reared in recirculating aquaculture system(RAS)

Atlantic salmon reared in recirculating aquaculture system(RAS) may lead to inappropriately high stocking density, because ?sh live in a limited space. Finding the suitable stocking density of Atlantic salmon reared in RAS is very important for RAS industry. In this paper, the in?uence of stocking density on growth and some stress related physiological factors were investigated to evaluate the ef fects of stocking density. The ?sh were reared for 220 days at ?ve densities(A: 24 kg/m^3; B: 21 kg/m^3; C: 15 kg/m^3; D: 9 kg/m^3 and E: 6 kg/m^3). The results show that 30 kg/m^3 might be the maximum density which RAS can af ford in China. The stocking densities under 30 kg/m^3 have no ef fect on mortality of Atlantic salmon reared in RAS. However, the speci?c growth rate(SGR), ?nal weight and weight gain in the high density group were signi?cantly lower than the lower density groups and middle density groups. Moreover, feed conversion rate(FCR) had a negative correlation with density. Plasma hormone T_3 and GH showed signi?cant decrease with the increase of the stocking density of the experiment. Furthermore, thyroid hormone(T 3), GH(growth hormone) activities were decreased with stocking density increase. However, plasma cortisol, GOT(glutamic oxalacetic transaminase) and GPT(glutamic pyruvic transaminase) activities were increase with stocking density increase. And the stocking density has no ef fects on plasma lysozyme of Atlantic salmon reared in RAS. These investigations would also help devise effcient ways to rear adult Atlantic salmon in China and may, in a way, help spread salmon mariculture in China.     

大陆边缘沉积盆地流体逸散管道地震特征及其成因机制

流体逸散管道是深部流体向上运移所形成的通道,在大陆边缘沉积盆地中广泛发育。由地震资料显示,流体逸散管道主要由根部、过路区和末端3部分组成。由于形成机制、起源和流体成分的不同,其组成三要素有不同的表现形式,因此,流体逸散管道类型多样,具有不同的地震反射特征。水力压裂是文献中最常见的一种有关流体逸散管道形成机制的解释,但是,随着地震勘探的发展和研究的不断深入发现,水力压裂不足以解释所有类型的流体逸散管道,还存在其他的成因机制,包括流化侵蚀作用、局部空洞坍塌及同沉积模式等。从流体逸散管道组成三要素的角度描述了不同类型流体逸散管道的地震反射特征,并详细论述了其4种成因机制下的形成过程。     

埃及Bakr—Amer油田古近系Eoc组储层特征

储层特征研究是评价碳酸盐岩储层物性、寻找油气富集区和落实剩余油分布的基础,通过对区域构造、地层和沉积特征的研究,利用统计和数学方法对Bakr-Amer油田Eoc储层物性、储集空间类型和控制因素进行了分析,认为受构造运动影响,储层在深部残余厚度大,但物性相对也较差,以压实、胶结和溶蚀作用为主。高部位残余厚度小,但受风化、淋滤和构造运动的影响,裂缝发育,储层物性好,以压实和溶蚀作用为主。     

Influence of Seawater on the Suction and Swelling Behavior of Clayey Soils

The present study examines the suction characteristics and swelling behavior of clayey soils when exposed to natural seawater with respect to distilled water. The effects of saline waters on the engineering behavior of soils need to be determined since the salinity of the pore fluid of soils near coastal areas increases continuously. Six clayey soil samples with different mineralogy and characteristics were gathered and tested to determine the suction and swelling characteristics in the presence of natural seawater and distilled water. The results show that the total suction values of the samples are higher in the presence of seawater than in distilled water. The samples with high swelling potential have lower matric suction values than nonswelling soils. Moreover, in contrast to swelling-type soils, the matric suction values of the nonswelling soils remain similar in the presence both distilled water and seawater. The modified free swell index (MFSI) of the samples is well correlated with the liquid limit (LL), plasticity index (PI), and cation exchange capacity (CEC) in distilled water. However, coefficients of determination decreased in the presence of seawater. Also, there is no significant correlation existing between total and matric suction values and the MFSI values of the samples.