新疆伊宁县塔吾尔别克金矿床流体包裹体特征研究及矿床成因

塔吾尔别克金矿床是西天山吐拉苏断陷盆地中一个重要的金矿床。矿体主要赋存于早石炭世二长斑岩及大哈拉军组第五岩性段安山岩、蚀变凝灰岩中,受断裂构造控制,矿床围岩蚀变作用普遍而强烈。矿石金属矿物主要为黄铁矿、自然金、赤铁矿和黄铜矿等,非金属矿物主要为石英、斜长石、方解石等。成矿过程大致划分为3个成矿阶段:1石英-黄铁矿阶段;2石英-硫化物脉阶段;3石英-碳酸盐阶段。石英及方解石中流体包裹体类型简单,主要为气液两相水包裹体和纯液相水包裹体。包裹体测试均一温度为100~196℃,流体盐度为0.0%~7.3%(质量分数,NaCl_(eq)),流体密度为0.9~1.0 g/cm~3,计算出成矿压力为5.2~81.9 MPa,对应成矿深度为0.5~7.4 km。塔吾尔别克金矿床成矿流体包裹体显示低温度、低盐度和较低密度的流体特征,表明成矿压力小和深度较浅。结合矿床地质特征、流体包裹体特征及前人研究成果,初步认为该矿床为浅成低温热液型金矿床。     

山地边界层中场变量的动力学研究

采用与实测较接近的二次函数来表达Ekman层中的湍流粘性系数K,在圆形气压场条件下,求得了山地上空边界层中的风速,进而求得散度、涡度和垂直速度等场变量随高度的分布。并作图分析了这些场变量的一些动力学特征。改进了以往在求解析解时,略去运动方程中湍流粘性力项中的关于高度的一阶导数项,以及取山坡面上风速为零作下边界条件等欠合理欠精确的做法。所求得的风速、散度、涡度和垂直速度均用简单的初等函数表示出来,有助于边界层参数化和深化对边界层动力学的认识。     

云南个旧卡房铜多金属矿床流体包裹体特征及其地质意义

卡房铜多金属矿床位于云南省个旧锡多金属矿集区, 作为该区南段典型的铜多金属矿床, 其深入的成矿流体性质及成矿物质来源研究尚为薄弱, 限制了对该矿床成因的深入认识。本文对产于玄武岩中的似层状铜多金属矿体(主要成矿类型)开展了精细的野外岩相学、矿物学、C-H-O同位素及流体包裹体原位成分分析。结果显示, 流体包裹体主要为气液两相水溶液包裹体, 石英流体包裹体均一温度为 264.5~330.5 ℃、盐度w(NaCleq)为16.24%~18.20%、密度为0.853~0.924 g/cm3; 萤石流体包裹体均一温度为199.8~339.1 ℃、盐度w(NaCleq)为8.81%~18.88%、密度为0.822~0.955 g/cm3; 方解石流体包裹体均一温度为112.1~199.4 ℃、盐度w(NaCleq)为4.96%~10.86%、密度为0.910~1.011 g/cm3, 表明卡房铜多金属矿床成矿流体具有中低温、中低盐度、低密度特征, 且早阶段到晚阶段, 成矿温度和流体盐度明显降低。与Cu矿共生的石英δDV-SMOW值为–83.9‰ ~ –78.9‰, δ18OH2O值为4.63‰~12.14‰, 方解石δ13CV-PDB值为–7.11‰~ 0.64‰; 同时, 石英单个流体包裹体原位分析结果显示流体包裹体富集大离子亲石元素, 如Na、K、Rb、Cs、Sr等。这些特征暗示了流体可能来源于与花岗质岩浆有关的热液流体, 热液流体上升过程中与围岩碳酸盐岩发生强烈的水-岩反应; 该过程可能萃取了玄武岩层中的Cu物质, 诱发了Cu的富集并最终成矿。     

世界一些大城市防灾减损的比较研究

比较分析了一些大城市的防灾减损措施，提出了具体对策。     

Abiotic Methane Reservoirs in the Western Tianshan HP–UHP Metamorphic Belt,China

Natural gas, consisting primarily of methane(CH₄), has become a major source of clean energy in modern society in many parts of the globe. Recent experimental observations and discoveries of deep-sourced abiotic CH₄ in cold subduction zones indicate the important ability of cold subducted slabs to generate natural gas reservoirs. However, most CH₄ flux and reservoirs remain unknown and their potential is overlooked in global carbon flux estimations. Massive abiot...     

西藏拉琼锑金矿床流体包裹体特征及地质意义

正拉琼锑金矿床位于措美县西约17 km,大地构造位于青藏高原南部的特提斯喜马拉雅构造带东段,地处于印度河—雅鲁藏布江缝合带(IYZS)与藏南拆离系(STDS)大断裂之间。由于印度板块与欧亚板块碰撞之后,导致印度洋持续扩张,造成印度大陆不断向北挤压,形成喜马拉雅造山带(尹安,2000),该地区近东西向的断裂自北而南依次     

Characteristics and implication of clay minerals in the northern and southern parts of the Chelung-pu fault, Taiwan

In this study, we report the characteristics of clay minerals present in the Chelung-pu fault in Taiwan. In the 1999 Chi-Chi earthquake, different slip motions were recorded along the Chelung-pu fault in the northern and southern parts of the fault. The characteristics of clay minerals present in the fault zones can be attributed to the differences in motion. We analyzed the shallow drill core samples obtained from the northern and southern sites penetrating the fault. The clay minerals identified in most of the samples from both the sites are smectite, illite, and chlorite. There are illite–smectite mixed layers with a high illite content and no chlorite–smectite mixed layer. In some samples, no smectite is detected. We also examined the iron content and symmetry of iron and magnesium in the silicate and hydroxide layers in chlorite. At the northern site, the total iron content in chlorite of gouge is larger than that of the host rocks. On the other hand, at the southern site, the total iron content varies widely. It is hypothesized that the smectite consumption and differences in the characteristics of chlorite may be controlled by the differences in the lithology, fluid chemistry, fluid temperature, or fault activities (heating or breakage) between the northern and southern sites.     

Pore fluid pressure effects in anisotropic rocks: Mechanisms of induced seismicity and weak faults

Many observations and studies indicate that pore fluid pressure in the crustal rocks plays an important role in deformation, faulting, and earthquake processes. Conventional models of pore pressure effects often assume isotropic porous rocks and yield the nondeviatoric pressure effects which seem insufficient to explain diverse phenomena related to pore pressure variation, such as fluid-extraction induced seismicity and crustal weak faults. We derive the anisotropic effective stress law especially for transversely-isotropic and orthotropic rocks, and propose that the deviatoric effects of pore fluid pressure in anisotropic rocks not only affect rock effective strength but also cause variation of shear stresses. Such shear stress variations induced by either pore pressure buildup or pore pressure decline may lead to faulting instability and trigger earthquakes, and provide mechanisms for the failure of crustal weak faults with low level of shear stresses. We believe that the deviatoric effects of pore fluid pressure in anisotropic rocks are of wide application in studies of earthquake precursors and aftershocks, oil and gas reservoir characterization, enhanced oil recovery, and hydraulic fracturing.     

青海省祁连县大拉洞柏杨沟矿区煤岩层对比研究

通过研究太原组的沉积特征及聚煤变化规律,采用了标志层、煤岩层组合特征、层间距、测井曲线形态等方法,对矿区内煤层、岩层进行了综合对比。确定了该区主要煤层的赋存层位、形态、分布及变化特征,对周边地区找煤工作具有一定的指导作用。     

Prediction of hydrodynamic loading on a mini TLP with free surface effects

This paper describes the extension of a fluid-flow simulations method to capture the free surface evolution around a full-scale Tension Leg Platform (TLP). The focus is on the prediction of the resulting hydrodynamic loading on the various elements of the TLP in turbulent flow conditions and, in particular, on quantifying the effects of the free surface distortion on this loading. The basic method uses finite-volume techniques to discretize the differential equations governing conservation of mass and momentum in three dimensions. The time-averaged forms of the equations are used, and the effects of turbulence are accounted for by using a two-equation, eddy-viscosity closure. The method is extended here via the incorporation of surface-tracking algorithm on a moving grid to predict the free-surface shape. The algorithm was checked against experimental measurements from two benchmark flows: the flow over a submerged semi-circular cylinder and the flow around a floating parabolic hull. Predictions of forces on a model TLP were then obtained both with and without allowing for the deformation of the free surface. The results suggest that the free surface effects on the hydrodynamic loads are small for the values of Froude number typically encountered in offshore engineering practice.