SH波对无限介质土中衬砌结构的动应力集中

运用复变函数法和保角映射法对无限介质土中的衬砌结构进行分析.通过引入两个势函数将弹性介质的控制方程解耦成两个Helmholtz方程.利用所得势函数的通解,得到无限土介质和衬砌结构的位移和应力的表达式,利用无限介质与衬砌结构之间的连续性条件和衬砌结构内边界上的边界条件,可确定波函数展开式中的末知系数,并给出动应力集中系数的数值结果.     

龙首二级面板堆石坝三维真非线性地震反应分析和评价

基于土石料三维粘弹塑性动力本构模型,并采用新型三维各向异性有厚度薄单元来模拟面板和堆石的接触面特性,建立了高面板堆石坝地震反应分析的三维真非线性动力分析方法.利用坝料动力特性的大型三轴试验成果,分析计算了龙首二级(西流水)面板堆石坝的地震反应,主要包括加速度反应、堆石体应力反应及坝体单元抗震安全系数、面板应力反应和变形及接缝位移、高趾墙动力反应等.为大坝的抗震设计提供了有力的技术依据.     

水位下降卸荷诱发库岸边坡快速失稳机理分析

本文以某工程现场岩质边坡为例，采用与传统裂隙水压力分布不同的水压力分布方式和边坡裂隙中可能发生的水锤效应相耦合，分析研究了岩质边坡发生滑动的机理及稳定性。研究表明，本文所采用的水压力分布方式较为符合边坡中的水压力分布实际情况，可以给出一个较为合理的稳定系数。当考虑水锤效应时，岩质边坡的稳定系数大大降低，说明水锤效应加剧了边坡破坏失稳的过程。本文所采用的水压力分布方式与边坡裂隙中的水锤效应相耦合的计算方法，在边坡稳定性分析中具有参考意义。     

天津泰达地区粉土振动液化特性的研究

本文以动三轴试验和原位测试数据为基础，以天津地区砂性土为例，探讨砂性土振动液化机理及孔隙水压力变化规律，采用多种方法分析判别砂性土液化，为高烈度地区重要工程建筑抗震设计提供重要数据。     

金丽温高速公路K81高边坡变形动态数值分析

对金丽温高速公路K81高边坡进行接触大变形有限元动态数值分析.结果表明,路堑边坡开挖,导致滑面的法向应力减小、抗滑力下降,是引起古滑坡复活的根本原因.研究结果也说明了接触大变形有限元分析方法可以较好地分析潜在滑面的力学作用,是研究滑坡的滑动机理的有效方法.     

增量位移反分析在水电地下洞室工程中的应用

反分析是确定计算模型参数的有效方法.通常多采用量测所得全量位移进行反演计算.但地下工程中许多量测数据为增量位移,且实际施工过程可以通过建立分步开挖的有限元模型来模拟.据此,结合某水电站地下洞室工程中地下厂房的开挖,建立了模拟动态施工的有限元模型,利用某一开挖步施工前后量测值之差,采用增量位移优化反分析方法对洞室附近初始地应力场及围岩弹性模量进行了反演.计算所得增量位移与实测值符合较好,表明了这种方法的可行性.同时,根据分析结果对该方法进行了评价.     

Evaluating accuracy for two empirical methods in predicting settlement of drilled shafts

Several theoretical, empirical and semi-empirical methods are available in the literature to predict settlement of drilled shafts in sandy soils. In the Arabian Gulf countries, specifically in the United Arab Emirates, equations and procedure from the rest of the world are being used in analysis and design of drilled shafts without proper validation. It is the aim of this study to assess the applicability and evaluate the accuracy of two well known, and commonly used methods for pile prediction in the United Arab Emirates (UAE), namely Vesic (1977) and Poulos (1979), via comparison with data from field pile load tests conducted on shafts drilled in the region. Some of these tests were conducted for the purpose of this study, while others were made available through the courtesy of International Piling Contractors who are active in the region (e.g. Bauer International and Swiss Borings). Pile load test data were analyzed to back-calculate the model parameters related to settlement under different loading stages. Geological data and soil properties were obtained from studies conducted at the relevant sites. An effort is made to correlate soil properties with the prediction models. Statistical analysis is conducted to assess the accuracy of the results obtained from the two methods at different stages of loading via those obtained from pile load tests. Moreover, a detailed parametric study is conducted to assess the effect of the related parameters on the predicted pile settlement and the estimated settlement at different stages of loading. The study concluded with a recommendation of the most appropriate models and procedures to be followed for predicting the settlement of drilled shafts in the UAE, together with useful charts and correlation relations. Results showed that settlement values predicted by Vesic (1977) and Poulos (1979) overestimates the true values. This revised version was published online in July 2006 with corrections to the Cover Date.     

Genesis of Kanggur Gold Deposit in Eastern Tianshan Orogenic Belt, NW China: Fluid Inclusion and Oxygen and Hydrogen Isotope Constraints

Abstract. Primary fluid inclusions in quartz and carbonates from the Kanggur gold deposit are dominated by aqueous inclusions, with subsidiary CO₂-H₂O inclusions that have a constant range in CO₂ content (10–20 vol %). Microthermometric results indicate that total homogenization temperatures have a wide but similar range for both aqueous inclusions (120 to 310C) and CO₂-H₂O inclusions (140 to 340C). Estimates of fluid salinity for CO₂-H₂O inclusions are quite restricted (5.9∼10.3 equiv. wt% NaCl), whereas aqueous inclusions show much wider salinity ranging from 2.2 to 15.6 equivalent wt %NaCl.
The 6D values of fluid inclusions in carbonates vary from -45 to -61 %, in well accord with the published δD values of fluid inclusions in quartz (-46 to -66 %). Most of the δ¹⁸O and δD values of the ore-forming fluids can be achieved by exchanged meteoric water after isotopic equilibration with wall rock by fluid/rock interaction at a low water/rock ratio. However, the exchanged meteoric water alone cannot explain the full range of δ¹⁸O and δD values, magmatic and/or meta-morphic water should also be involved. The wide salinity in aqueous inclusions may also result from mixing of meteoric water and magmatic and/or metamorphic water.     

Analysis of geomagnetic field along seismic profile P4 of the International Project POLONAISE'97

This paper presents relative secular variations of the total intensity of the geomagnetic field against a background of results of magnetic anomaly interpretation along seismic profile P4. Profile P4 crosses a Variscan folding zone in the Paleozoic Platform (PLZ), the Trans-European Suture Zone (TESZ), and the Polish part of the East European Craton (EEC). Secular geomagnetic field variations measured in 1966–2000 along a line adjacent to seismic profile P4 were analysed. The study of secular variations, reduced to the base recordings at the Belsk Magnetic Observatory, showed that the growth of geomagnetic field at the East European Craton was slower than in the Trans-European Suture Zone and the Paleozoic Platform.A 2D crustal magnetic model was interpreted as a result of magnetic modelling, in which seismic, geological and geothermal data were also used. The modelling showed that there were significant differences in the magnetic model for geotectonic units, which had been earlier determined based on deep seismic survey data. It should be noted that a fundamental change of trend of the relative secular variations was observed at the slope of the Precambrian Platform. After analysing the geomagnetic field observed along profile P4, the hypothesis that the contact between Phanerozoic and Precambrian Europe lies in Poland's territory can be proven.     

Methane-rich fluid inclusions in skarn near the giant REE–Nb–Fe deposit at Bayan Obo, Northern China

We report fluid inclusion data for skarn, formed at the contact between Hercynian granitoids and dolomite of the Proterozoic Bayan Obo Group, in the vicinity of Bayan Obo REE–Nb–Fe deposit, Inner Mongolia, China. Three types of fluid inclusions are identified: two-phase CH₄-rich, three-phase liquid–vapour–solid and two-phase aqueous inclusions. Using microthermometry and laser Raman microprobe analysis to calculate isochores for CH₄-bearing inclusions, we estimate fluid trapping conditions at T=280 to 344 °C and P<1 to 2.3 kbar. Such conditions are compatible with formation of CH₄ inclusions as a result of reaction between graphite in the country rocks (black slate sequence) and fluids derived from magma. The lack of carbonaceous material in the inclusions supports the hypothesis that CH₄ was generated during fluid migration rather than by in situ reaction. In contrast to the skarn, and despite the fact that similar graphite-bearing slates are found in the host rocks, no CH₄-bearing inclusions have been so far reported from Bayan Obo REE ores. We therefore conclude that the skarn-forming fluids in the contact aureole of the Hercynian granitoids were not involved at any stage in the formation of the Bayan Obo deposit.