扩频通信技术及其在地震台风中的应用试验

扩频通信技术是基于信息容量和信息传输差错概率理论而建立的先进的无线通讯方式、多次野外实地证实它具有抗干扰性强、可实现码分多址等优点。通过分析传输试验数据，我们有理由相信扩频通信技术在遥测地震台风中具有较高的应用和广阔的发展前景。     

基于波动方程的广义屏叠前深度偏移

地震波传播算子的计算效率和精度是制约三维叠前深度偏移的关键因素. 广义屏传播算子(GSP, Generalized Screen Propagator)是一种在双域中实现的广角单程波传播算子. 这一方法略去了在非均匀体之间发生的交混回响,但它可以正确处理包括聚焦、衍射、折射和干涉在内的各种多次前向散射现象. 通过背景速度下的相移和扰动速度下的陡倾角校正,广义屏算子能够适应地层速度的强烈横向变化. 这种算子可以直接应用于炮集叠前偏移,通过将广义屏算子作用于双平方根方程,还可以获得一种高效率、高精度的炮检距域叠前深度偏移方法,用于二维共炮检距道集和三维共方位角道集的深度域成像. 本文首先简述了炮检距域广义屏传播算子的理论,进而讨论了共照射角成像(CAI, Common Angle Imaging)条件,由此给出各个不同照射角(炮检距射线参数)下的成像结果,进而得到共照射角像集. 由于照射角和炮检距的对应关系,共照射角像集又为偏移速度分析和AVO(振幅随炮检距变化)分析等提供了有力工具.     

流动成像测井研究进展

流动成像测井属于对非均匀介质动态的非线性测量，通过对油气井内多相流体信息的投影扫描和反演处理，实时成像显示流体分布及流动状况，国外研制的电导法，电容法仪器采用电导探针或电容元件构成阵列测量探头，分别利用油气与水的导电特性和介电特性差异辨识井内流体，对流动截面的测量局限于个别点上，已在水平井中见到应用效果，但对物场信息投影测量的数据量和分辨率未能满足成像要求。我国提出的电磁法采用环状阵列电极构成测量探头，综合利用油气与水的导电和介电特性差异辨识井内流体，可以测量获得多相流体流动截面的清晰图像，为研究开发全新的流动成像测井系统奠定了良好基础。     

Effective stress analyses of liquefaction-induced deformation in river dikes

A series of effective stress analyses is carried out on the seismic performance of river dikes based on the case histories during the 1993 Hokkaido-Nansei-oki and 1995 Hyogoken-Nambu earthquakes in Japan. Seven case histories selected for the analyses involve a crest settlement ranging from none to 2.7 m in the dikes 3–6 m high with evidence of liquefaction at foundation soil. The effective stress model used is based on a multiple shear mechanism and was developed by one of the authors. The soil parameters are evaluated based on the site investigation and laboratory test results. The results of the analyses are basically consistent with the observed performance of the river dikes. In particular, the effective stress model shows a reasonable capability to reproduce the varying degree of settlements depending on the geotechnical conditions of foundation soils beneath the dikes. The analyses also indicate that the effect of a cohesive soil layer mixed with the liquefiable sand layers beneath the dikes can be a primary factor for reducing the liquefaction-induced deformation of dikes.     

Hybrid vibration experiments with a bridge foundation system model

In order to improve seismic design technology of bridges, it is necessary to evaluate the vibration characteristics of a bridge–soil system that consists of soil, foundation structure, pier and superstructure. However, there have been few experimental studies on seismic behavior of bridge–soil system. In this paper, we conducted the hybrid vibration experiment on seismic behavior of bridge–soil system, and examined the applicability of hybrid vibration experiment to study seismic response of bridge–soil system. Based on the experiment results, seismic response of bridge was quantitatively studied.     

Efficient methods for solving water flow in variably saturated soils under prescribed flux infiltration

The non-linear solvers in numerical solutions of water flow in variably saturated soils are prone to convergence difficulties. Many aspects can give rise to such difficulties and in this paper we address the gravity term and the prescribed-flux boundary in the Picard iteration. The problem of the gravity term in the Picard iteration is iteration-to-iteration oscillation as the gravity term is treated, by analogy with the time-step advance technique, ‘explicitly’ in the iteration. The proposed method for the gravity term is an improvement of the ‘implicit’ approach of Zhang and Ewen [Water Resour. Res. 36 (2000) 2777] by extending it to heterogeneous soil and approximating the inter-nodal hydraulic conductivity in the diffusive term and the gravity term with the same scheme. The prescribed-flux boundary in traditional methods also gives rise to iteration-to-iteration oscillation because there is no feedback to the flux in the solution at the new iteration. To reduce such oscillation, a new method is proposed to provide such a feedback to the flux. Comparison with traditional Picard and Newton iteration methods for a wide range of problems show that a combination of these two proposed methods greatly improves the stability and consequently the computational efficiency, making the use of small time step and/or under-relaxation solely for convergence unnecessary.     

Evaluating Earthquake-Triggered Landslide Hazard at the Basin Scale Through Gis in the Upper Sele River Valley

To evaluate techniques for assessing earthquake-triggeredlandslide hazard in the Southern Apennines (Italy), a GIS-based analysis was used to modelseismically induced slope deformations. Geological, geotechnical, geomorphological and seismologicaldata were integrated into a standard earthquake slope stability model. The model assessed thelandslide potential that existed during the 1980 Irpinian earthquake in the Upper Sele river Valley.The standard Newmark displacement analysis, widely used for predicting the location of shallowunstable slopes, does not take into account errors and/or uncertainties in the input parameters.Therefore, a probabilistic Newmark displacement analysis technique has been used. Probabilistictechniques allow, e.g., an estimation of the probability that a slope will exceed a certain criticalvalue of Newmark displacement. In our probabilistic method, a Monte-Carlo based simulation modelis used in conjunction with a GIS. The random variability of geotechnical data is modelled by probabilitydensity functions (pdfs), while for the seismic input three different regression laws wereconsidered. Input probability distributions are sampled and the resulting values input into empiricalrelations for estimating Newmark displacement. The outcome is a map in which to each siteis related a spatial probability distribution for the expected displacement in response to seismic loading.Results of the experiments show a high grade of uncertainty in the application of the Newmarkanalysis both for the deterministic and probabilistic approach in a complex geological setting suchas the high Sele valley, quite common in the Southern Apennines. They show a strong dependence onthe reliability of the spatial data used in input, so that, when the model is used at basin scale,results are strongly influenced by local environmental condition (e.g., topography, lithology, groundwatercondition) and decrease the model performance.     

Optimal placement of dampers and actuators based on stochastic approach

A general method is developed for optimal application of dampers and actuators by installing them at optimal location on seismic-resistant structures. The study includes development of a statistical criterion, formulation of a general optimization problem and establishment of a solution procedure. Numerical analysis of the seismic response in time-history of controlled structures is used to verify the proposed method for optimal device application and to demonstrate the effectiveness of seismic response control with optimal device location. This study shows that the proposed method for the optimal device application is simple and general, and that the optimally applied dampers and actuators are very efficient for seismic response reduction.     

基于GIS与ANN耦合技术的地裂缝灾情非线性模拟预测系统——以山西榆次地裂缝灾害为例

现代地裂缝在世界许多国家普遍存在 ,已成为当今世界范围内的主要地质灾害之一。本文在详尽分析了山西榆次地裂缝的各个致灾因子的基础上 ,利用GIS技术建立了地质学意义上的专题层 ;然后采用人工神经网络技术构建出了地裂缝灾害活动性的评价模型 ,并建立了地裂缝活动性的评价系统 ,对榆次地裂缝进行了灾害活动性评价 ,为榆次市城建和国土规划等部门的正确决策提供了重要的科学依据     

结构动力反应分析的三阶显式方法

本通过对传统动力反应分析方法的总结，阐明了建立隐式和显式方法的一般思路及数学本质，提出了使用系统位移反向向量三阶导数的隐工和实用显式积分方法－3阶显式方法，分析了该显式方法的精度和稳定性，并对建立更高阶隐式和显式方法以及方法的精度和稳定性作了初步讨论。最后，通过算例对本方法、献[1]方法和经典的常平均加速度法（隐式方法、视为精确解）的精度和稳定性进行了比较分析。结果表明，本方法具有明显的优点。