Numerical study of the motions and drift force of a floating OWC device

The motion and the drift force of a floating OWC (oscillating water column) wave energy device in regular waves are studied taking account of the oscillating surface-pressure due to the pressure drop across the duct of the air chamber. The potential problem inside the chamber is formulated by making use of the Green integral equation associated with the Rankine-type Green function while the outer problem with the Kelvin-type Green function. The added mass, wave damping and excitation coefficients as well as the motion and drift force of the OWC device are calculated for various values of parameter related to the pressure drop.     

165°E赤道太平洋溶解氧垂直分布异常分析

根据1986—1990中美热带西太平洋海气相互作用8个航次合作综合调查资料，分析了1987年10月赤道中西太平洋165°E（10°N－6°S）次表层水形成溶解氧最大值的原因。1986－1987年E1Nino衰退时期，该海域赤道附近在E1Nino强盛时期下沉的次表层水开始回升，短时期内形成了类似于中、高纬度海域的理化环境，使浮游生物在混合层内聚集生长，最终导致溶解氧含量在次表层出现最大值和过饱和含量。     

Prediction of local scour around circular piles under waves using a novel artificial intelligence approach

Abstract

The scour phenomena around vertical piles in oceans and under waves may influence the structure stability. Therefore, accurately predicting the scour depth is an important task in the design of piles. Empirical approaches often do not provide the required accuracy compared with data mining methods for modeling such complex processes. The main objective of this study is to develop three data-driven methods, locally weighted linear regression (LWLR), support vector machine (SVR), and multivariate linear regression (MLR) to predict the scour depth around vertical piles due to waves in a sand bed. It is the first effort to develop the LWLR to predict scour depth around vertical piles. The models simulate the scour depth mainly based on Shields parameter, pile Reynolds number, grain Reynolds number, Keulegan–Carpenter number, and sediment number. 111 laboratory datasets, derived from several experimental studies, were used for the modeling. The results indicated that the LWLR provided highly accurate predictions of the scour depths around piles (R?=?0.939 and RMSE = 0.075). Overall, this study demonstrated that the LWLR can be used as a valuable tool to predict the wave-induced scour around piles.     

秦山核电站邻近水域的流况分析

本文分析了秦山核电站邻近水域各测站的实测流、潮流和佘流分布及季节变化。结果表明:测区内潮流为非正规丰日浅海潮流,其运动形式呈往复流。核电站二期工程取水口附近(L_1,18站)为一大流速区,而一期工程出水口周围(L_2,L_2′站)有一相对小的流速区。大流速区落潮流历时大于涨潮流历时,而相对小流速区则相反;大流速区的余流较小,而小流速区的余流大。在四个季节中,涨潮流速秋季最大,春季次之,夏季最小;落潮流速秋季最大,夏季次之,春季最小。余流冬、秋两季较大。在实测流中以潮流为主,径流和季风的作用也相当显著。     

珠江口沉积物酸挥发性硫化物与重金属生物毒性的研究

研究了2003年10月采于珠江口5个站位的沉积物剖面酸挥发性硫化物(AVS)和同时提取的重金属(SEM:Pb,Zn,Cu,Cd,Ni)。其中,站位1、2位于中滩,其沉积物的AVS含量变化范围较小,为0.25—4.06μmol.g-1;站位3、4位于西滩,其沉积物的AVS含量变化范围较大,为0—26.09μmol.g-1。中滩和西滩沉积物的AVS含量均随深度增加。西滩表层沉积物的AVS含量接近于零,这可能与该水域较强的底层流和沉积物的再悬浮作用有关。站位5位于珠江口外侧,其表层沉积物的AVS含量相对较高,且垂向变化较小,可能是还原性沉积物间歇性再悬浮后重新沉积的结果。站位1、2和5沉积物中同时提取的重金属含量大体在0.95±0.2μmol.g-1范围内,随深度增加略呈下降趋势;而西滩沉积物重金属含量相对较高,为1.43—2.42μmol.g-1,且在一定深度范围内随深度增加呈明显下降的趋势,表明珠江口西滩沉积物中的重金属污染有加重的趋势。对AVS/SEM摩尔比值和单个金属的毒性效应研究显示,珠江口内尤其是西滩的表层沉积物存在重金属污染,对其中生活的底栖生物具有潜在的毒性效应。     

Environmental control of growth and BChl a expression in an aerobic anoxygenic phototrophic bacterium, Erythrobacter longus (DSMZ6997)

1Introduction Aerobic anoxygenic phototrophic bacteria(AAPB) are facultative heterotrophs that can utilizelight for photosynthesis. These unique-functioningbacteria are widely distributed in marine environ-ments, such as coastal waters (Shiba et al., 1991…     

Numerical and experimental study on hydrodynamic interaction of side-by-side moored multiple vessels

This paper aims to investigate the basic interaction characteristics of side-by-side moored vessels both numerically and experimentally. A higher-order boundary element method (HOBEM) combined with generalized mode approach is applied to analysis of motion and drift force of side-by-side moored multiple vessels (LNG FPSO, LNGC and shuttle tankers). Model tests were carried out for the same floating bodies investigated in the numerical study in regular and irregular waves. Global and local motion responses and drift forces of three vessels are compared with those of calculations. Discussions is highlighted on applicability of numerical method to prediction of sophisticated multi-body interaction problem of which motion behavior is very important to analysis of mooring dynamics of deep sea floating bodies.     

Mechanical Characteristics of Light-Weighted Soils Using Dredged Materials

This study investigates the mechanical characteristics of light-weighted soils (LWS) consisting of expanded polystyrene (EPS), dredged clays, and cement through both unconfined and triaxial compression tests. The mechanical characteristics of the compressive strength of LWS are analyzed with varying initial water contents of dredged clays, EPS ratio, cement ratio, and curing pressure. In the triaxial compression test, it is found that the compressive strength of LWS associated with EPS is independent on the effective confining pressure. When both EPS ratio is less than 2% and cement ratio is more than 2%, the compressive strength rapidly decreases after the ultimate value. This signifies that the compressive strength-strain behavior is quite similar to that of the cemented soil. The ground improved by LWS has the compressive strength of 200 kPa associated with the optimized EPS ratio of 3-4% and initial water content of 165-175%. The ultimate compressive strength under both triaxial and unconfined compression tests is almost constant for a cement ratio of up to 2%.     

How tides and river flows determine estuarine bathymetries

For strongly tidal, funnel-shaped estuaries, we examine how tides and river flows determine size and shape. We also consider how long it takes for bathymetric adjustment, both to determine whether present-day bathymetry reflects prevailing forcing and how rapidly changes might occur under future forcing scenarios.Starting with the assumption of a 'synchronous' estuary (i.e., where the sea surface slope resulting from the axial gradient in phase of tidal elevation significantly exceeds the gradient in tidal amplitude ), an expression is derived for the slope of the sea bed. Thence, by integration we derive expressions for the axial depth profile and estuarine length, L, as a function of and D, the prescribed depth at the mouth. Calculated values of L are broadly consistent with observations. The synchronous estuary approach enables a number of dynamical parameters to be directly calculated and conveniently illustrated as functions of and D, namely: current amplitude Û, ratio of friction to inertia terms, estuarine length, stratification, saline intrusion length, flushing time, mean suspended sediment concentration and sediment in-fill times.Four separate derivations for the length of saline intrusion, L_I, all indicate a dependency on (U_o is the residual river flow velocity and f is the bed friction coefficient). Likely bathymetries for `mixed' estuaries can be delineated by mapping, against and D, the conditions L<sub>I</sub>/L<1,E<sub>X</sub>/L<1 (E<sub>X</sub> is the tidal excursion) alongside the Simpson-Hunter criteria D/U<sup>3</sup><50 m<sup>−2</sup> s<sup>3</sup>. This zone encompasses 24 out of 25 `randomly' selected UK estuaries.However, the length of saline intrusion in a funnel-shaped estuary is also sensitive to axial location. Observations suggest that this location corresponds to a minimum in landward intrusion of salt. By combining the derived expressions for L and L_I with this latter criterion, an expression is derived relating D_i, the depth at the centre of the intrusion, to the corresponding value of U_o. This expression indicates U_o is always close to 1 cm s⁻¹, as commonly observed. Converting from U_o to river flow, Q, provides a morphological expression linking estuarine depth to Q (with a small dependence on side slope gradients).These dynamical solutions are coupled with further generalised theory related to depth and time-mean, suspended sediment concentrations (as functions of and D). Then, by assuming the transport of fine marine sediments approximates that of a dissolved tracer, the rate of estuarine supply can be determined by combining these derived mean concentrations with estimates of flushing time, F_T, based on L_I. By further assuming that all such sediments are deposited, minimum times for these deposition rates to in-fill estuaries are determined. These times range from a decade for the shortest, shallowest estuaries to upwards of millennia in longer, deeper estuaries with smaller tidal ranges.     

海水中234Th的超低水平液闪谱仪测定

本文提出了利用超低水平液闪谱仪测定海水中234Th的方法.海水经氢氧化铁吸附共沉淀富集后,接着用阴离子交换和TBP/煤油萃取进行Th同位素的分离与纯化.对一系列测定条件进行了详细的研究,提出了测定海水中234Th的适宜程序,即在含有234Th和产额示踪剂230Th的纯化后的5mol/dm3HNO3溶液中加入TBP/煤油进行萃取,然后用0.1mol/dm3HNO3反萃取,后者是先用契伦柯夫计数法测量234Th(通过234mPa),后加入闪烁液Hisafe 3用α/β模式测量α放射体230Th.对于α和β放射体液闪谱仪的计数效率分别为100%和55.7%±2.7%.234Th的化学回收率和总探测效率分别为70%～80%和30%～45%.该法测定海水中的234Th快速、简便和高效.