某大型厂房地面垂直形变监测

结合西北地区黄土塬上某大型厂房地面垂直形变的监测工作,提出和应用选定在具有代表性的监测区域布点、改进标尺进行观测等一系列行之有效的方法和措施,取得了满意的结果。通过监测数据分析,指出型架的不稳定主要是因为温度变化而导致地面不均匀垂直形变引起的,为厂房地面不均匀垂直形变的治理提供了依据。     

集中质量对非保守压杆稳定和振动的影响

本文用法分析了集中质量对悬臂的Ｌｅｉｐｈｏｌｚ杆的失稳形式及临界载荷的影响，得出了一些有用的结论。     

济南市燕翅山铁矿采空区稳定性分析评价

济南燕翅山铁矿已闭坑多年,遗留大量的采空区潜在地面塌陷、山体崩塌及裂缝隐患,对当地人民群众生命财产安全构成威胁。该文对采空区稳定性进行了分析计算,并根据研究区实际,提出了主要地质灾害治理方法和措施建议。     

Improvement of pseudo-static method for slope stability analysis

traditional In this paper, two drawbacks pseudo-static method （vertical of the slice method） in the slope stability evaluation have been studied. First, the sliding mass is divided into vertical slices according to this method, which is irrational to some extent in the seismic design of slope. Second, only peak ground acceleration （PGA） is considered, and the effects of shaking frequency and duration on slope stability are neglected. And then, based on the theory of elastic wave and the summarized geological model, this paper put forwards an improved method of pseudo-method by using the theory of elastic wave and Hilbert-Huang transform. The improved pseudostatic method gives reasonable considerations to the time-frequency effects of seismic wave and its rationality has been verified by the shaking table test. This method can evaluate the safety of a slope, the happening time and the scale of landslides. At the same time, this method also can improve the high accuracy of the evaluation of the safety of the slope.     

沂源鲁村煤矿千米混合立井围岩稳定性分析与施工措施

基于沂源鲁村煤矿围岩稳定性差,塑性变形量大的实际情况,采用弹塑性力学分析的方法,分析了鲁村煤矿千米混合立井岩石开挖后围岩应力重新分布情况和塑性变形,进而确定是否采用临时支护措施,以确保施工安全。研究表明鲁村煤矿混合井围岩掘进深度大于780 m时,围岩变得不稳定,需要施加锚喷临时支护,同时增加井筒掘进荒断面,预留围岩变形空间。     

BDS卫星差分码偏差稳定性分析及其短期预报

利用MGEX(multi-GNSS experiment)发布的BDS卫星差分码偏差(differential code bias, DCB)产品，比较分析不同太阳活动水平下BDS卫星DCB产品的稳定性变化特性，并采用差分自回归移动平均(auto-regressive integrated moving average, ARIMA)时间序列预测模型，实现不同太阳活动水平下BDS卫星DCB的短期预报。结果表明，在太阳活动高年，BDS卫星DCB日解值稳定度、月稳定性均明显低于太阳活动低年，且不同卫星星座类型的BDS卫星DCB稳定性也存在差异；ARIMA时间序列预报结果与MGEX发布值符合程度较好，优于多项式拟合法预测结果。     

Large scale failure of the external waste dump at the “South Field” lignite mine, Northern Greece

This paper presents the failure process of the external waste dump of the South Field Mine, the major open pit mine in Greece. The waste materials of the mine were deposited in three phases, forming an average inclination slope 10% and a total height of 110 m from the ground surface. The failure occurred when the third phase of the deposit was initiated. The high moisture content of the waste materials and their deposition over a spring, choking its flow, had as a result the development of high pore water pressure in clayey and marly materials in the base of the deposit. As a consequence, a large scale slope failure incident occurred. The landslide involved the mobilization of waste material in the order of 40 Mm³, while the material that moved outside the boundaries of the waste dump was in the order of 2.5 Mm³. The stability of the waste dump was investigated using the limit equilibrium analysis and different types of models.Limit equilibrium analyses were performed using different methods and considering the clay layer of small shear resistance that exists in the base of the deposit. They do not indicate activation of failure mechanism, only that there is a combination of high pore water pressure that developed in the deposit because the covering of the spring with the clayey materials of the dump.     

Lienard方程零解渐近稳定性的一个弱条件

研究Liemrd方程零解的渐近稳定性.在Liapunov函数Ⅴ满足dV/dt≤0的情况下,给出了进一步判断其渐近稳定的一个条件.     

Slope stability FEM analysis and retaining wall design: a case study of clinker in Benxi of Liaoning

Stability is always the most important problem after high slope was excavated. The study analyzed the stress and strain inside the slope by Finite Element Method (FEM) and carried through stress distribution and failure zone, then analyzed the stability of the slope using three different methods and came to the conclusion that it is in unstable condition, so the designed retaining wall was put forward which makes the slope stable.     

Parameters affect foaming and foam stability during foam drilling

The authors presented indoor practice experiments of parameters affect on foaming and foam stability. Experiments were carried out and special equipments were used to determine foaming and foam stability; tests were tabulated and charted. The effects of chemical and physical parameters on foaming and foam stability have been conducted.