Environmental contamination of Zn,Cd, Ni,Cu, and Pb from industrial areas in Hamadan Province,western Iran

Eleven surface soil samples from calcareous soils of industrial areas in Hamadan Province, western Iran were analyzed for total concentrations of Zn, Cd, Ni, Cu and Pb and were sequentially extracted into six fractions to determine the bioavailability of various heavy metal forms. Total Zn, Cd, Ni, Cu and Pb concentrations of the contaminated soils were 658 (57–5,803), 125.8 (1.18–1,361), 45.6 (30.7–64.4), 29.7 (11.7–83.5) and 2,419 (66–24,850) mg kg⁻¹, respectively. The soils were polluted with Zn, Pb, and Cu to some extent and heavily polluted with Cd. Nickel values were not above regulatory limits. Copper existed in soil mainly in residual (RES) and organic (OM) fractions (about 42 and 33%, respectively), whereas Zn occurred essentially as RES fraction (about 69%). The considerable presence of Cd (30.8%) and Pb (39%) in the CARB fraction suggests these elements have high potential biavailability and leachability in soils from contaminated soils. The mobile and bioavailable (EXCH and CARB) fractions of Zn, Cd, Ni, Cu, and Pb in contaminated soils averaged (7.3, 40.4, 16, 12.9 and 40.8%), respectively, which suggests that the mobility and bioavailability of the five metals probably decline in the following order: Cd = Pb > Ni > Cu > Zn.     

The relationship between hydrodynamic properties and weathering of soils derived from volcanic rocks,Galapagos Islands (Ecuador)

The aim of this interdisciplinary study is to examine a component of the hydrological cycle in Galapagos by characterizing soil properties. Nine soil profiles were sampled on two islands. Their physical and hydrodynamic properties were analyzed, along with their mineralogical composition. Two groups of soils were identified, with major differences between them. The first group consists of soils located in the highlands (>350 m a.s.l.), characterized by low hydraulic conductivity (<10⁻⁵ m s⁻¹) and low porosity (<25%). These soils are thick (several meters) and homogeneous without coarse components. Their clay fraction is considerable and dominated by gibbsite. The second group includes soils located in the low parts of the islands (<300 m a.s.l.). These soils are characterized by high hydraulic conductivity (>10⁻³ m s⁻¹) and high porosity (>35%). The structure of these soils is heterogeneous and includes coarse materials. The physical properties of the soils are in good agreement with the variations of the rainfall according to the elevation, which appears as the main factor controlling the soil development. The clayey alteration products constrain soils physical and hydrodynamic properties by reducing the porosity and consequently the permeability and also by increasing water retention.     

Background concentrations of elements in surface soils and their changes as affected by agriculture use in the desert-oasis ecotone in the middle of Heihe River Basin,North-west China

The concentrations of twenty four chemical elements in the surface layer of natural desert soils and the cultivated farmland soils were measured at a desert-oasis ecotone in the middle of Heihe river basin, north-west China. Background values were estimated for (a) major elements (Si 335.3 g kg^− 1, Al 49.4 g kg^− 1, Fe 19.1 g kg^− 1, Ca 29.4 g kg^− 1, Mg 8.9 g kg^− 1, K 20.1 g kg^− 1, Na 17.5 g kg^− 1 and P 0.338 g kg^− 1), (b) heavy metals and non-metals (Cr 55.8 mg kg^− 1, Mn 404.8 mg kg^− 1, Ni 17.7 mg kg^− 1, Cu 5.1 mg kg^− 1, Zn 33.7 mg kg^− 1, Pb 15.5 mg kg^− 1 and As 5.2 mg kg^− 1) and (c) other trace elements (Ti 2.0 mg kg^− 1, V 55.3 mg kg^− 1, Co 5.7 mg kg^− 1, Rb 82.4 mg kg^− 1, Sr 232.9 mg kg^− 1, Y 14.7 mg kg^− 1, Zr 194.9 mg kg^− 1, Nb 7.8 mg kg^− 1 and Ba 720.6 mg kg^− 1). After natural desert soil was cultivated for agricultural use, significant changes in element concentrations occurred under tillage, irrigation and fertilisation management. Compared to natural soil, the for the levels of Si, K, Na, Sr, Zr and Ba decreased, and no changes were observed for Rb, while the values of the other 17 elements increase in agricultural soil from 1.2 to 3.5 times. However, their absolute concentrations are still low, suggesting that the arable soil in this region remains comparatively a clean soil. The increased silt, clay and organic carbon content, under long-term irrigation, enriched the fine-grained materials, and application of fertilisers and manure contributed to the accumulation of most elements in arable soil. The accumulation of elements in agricultural soil increased with increasing cultivation years and extent of soil development.     

Finite Element Modeling of Swelling Soil Pressures Using Joint/Interface Elements

There could be some discontinuities in a soil media such as layers, earth structures, cracks, and fissures so that estimation of stresses and deformations in these types of soil masses are somewhat different from continuous masses. The discontinuities in a soil mass could be considered as a special link between two blocks. Transmitted swelling pressures affected by the soil properties of the backfill especially at the interface between the backfill and retaining wall. In order to estimate the transmitted swelling pressure distribution behind a retaining wall, using with interface element, a new finite element model and a code (SWELPRES) have been developed. To evaluate the effect of backfill characteristics and interface element from the transmitted lateral swelling pressures, four cases of thickness of backfills with or without interface elements are investigated.     

Field Measurement of Suction, Water Content, and Water Permeability

This paper presents a review of techniques for field measurement of suction, water content, and water hydraulic conductivity (permeability). Main problems in the use of field tensiometers are addressed and hints on how to improve tensiometer performance are given. Advantages and limitations of instruments for indirect measurement of suction including electrical conductivity sensors, thermal conductivity sensors, dielectric permittivity sensors, filter paper, and psychrometer are discussed. Techniques for water content measurement based on dielectric methods are then presented. These include time and amplitude domain reflectometry and capacitance. Finally, a brief overview of methods for measurement of water permeability in the field is presented.     

川中—川南地区上三叠统沉积相研究

综合分析岩心、露头剖面和测井资料,认为川中—川南地区上三叠统发育三角洲相和湖泊相,其中,三角洲相可进一步划分为三角洲平原、三角洲前缘和前三角洲三个亚相,湖泊相则可细分为滨湖和浅湖两个亚相。不同时期三角洲相和湖泊相发育程度不同。须一段、须三段、须五段和须六段以湖泊沉积为主,由东向西,水体逐渐加深。须二段和须四段以三角洲沉积为主,湖泊沉积分布范围较小。须二段发育时期,研究区北部构造活动强烈,沉积物供给充分,三角洲相主要由北向南延伸;须四段沉积时期,由于北部构造活动逐渐减弱,东南部沉积物供给增加,三角洲相主要由东南向西北方向延伸。随着周缘构造活动的变化,研究区沉积范围逐渐扩大。早期沉积范围仅局限于宜宾—泸州以北地区,中晚期沉积范围扩大,宜宾—泸州以南地区开始接收沉积。     

渤海新近系浅水三角洲沉积体系与大型油气田勘探

新近纪渤海具有构造稳定、沉降缓慢、湖泊水域范围大、内部无分割、地形平缓、坡度小等特点,广泛发育浅水三角洲,从而形成渤海海域新近系良好的储盖组合和优越的油气成藏条件。浅水三角洲砂岩储层由于受河流作用的控制,砂体具有明显的方向性,存在明显的分叉现象,与曲流河相比,砂体连通性较好,砂体等厚图呈典型的朵叶状。湖相厚层泥岩普遍发育,与浅水三角洲砂体组成多套垂向优质储盖组合。浅水三角洲发育于渤海新近纪至今处于生烃的峰期主力富烃凹陷的有利区带,新构造运动造成新近纪以来凹陷主力源岩生烃峰期与新构造运动的同步耦合,为渤海大型浅水三角洲成因的优质储层油气成藏创造了优越条件,可以形成大型油气田。因此,重视并充分挖掘渤海浅水三角洲储层类型油气藏的勘探潜力将是追求浅层优质油藏、进一步增储上产的方向所在。     

泸州古隆起对贵州赤水地区早、中三叠世沉积环境和相带展布的控制

地质历史中,区域大地构造和区域古地貌单元的不同特征是控制沉积相带展布及发育的主要因素之一。东吴运动形成的泸州古隆起是影响本区沉积相带展布的重要因素。早、中三叠世时,泸州古隆起的高部位向南延伸到太和场以南,宝元以北一带。宝元、龙爪等构造处于泸州古隆起东南部斜坡上,而宝元构造处于古隆起东南部斜坡上部,龙爪构造处于古隆起东南部斜坡中部。此古地貌格局,与区域海平面升降一起,控制了早三叠世沉积相带展布和地层厚度。在古地貌高的隆起区域,由于水体开阔、水动力条件相对较强,沉积了有利于形成储集体的滩相沉积物（生屑滩、砂屑滩、鲕粒滩等）。从泸州古隆起的高部位向古隆起的斜坡区,地层厚度逐渐增大,沉积物向粒度变细、颜色加深的特征相变。     

墨西哥湾GC238区冷泉碳酸盐岩的微结构与石化微生物特征

采于墨西哥湾GC238海底天然气渗漏区浅表层的冷泉碳酸盐岩呈结核状产出,由方解石微晶和胶结物及少量的黄铁矿构成。胶结物由直径为0.1～0.5 m的方解石化的球体、卵形体、棒状体组成,充填于方解石晶体之间。冷泉碳酸盐岩结核下表面发育有由方解石化的球体、卵形体、棒状体组成的薄层,其中的一些球状集合体（约5 m）断面显示发育有核和外壳的层圈结构。黄铁矿呈草莓状,也具有相似的层圈结构。这种层状结构与活体古细菌被硫酸盐还原细菌包裹的层圈结构相似。样品中所保存的球体、卵形体、棒状体及其所组成的层圈结构可能是石化的甲烷氧化古细菌和硫酸盐还原细菌。     

砂卵石换填地基在洛(阳)南新区高层建筑中的应用

从粗粒土振动压实特性、砂卵石地基承载力特征及作用三方面对砂卵石换填地基进行了分析总结,通过工程实例证明人工换填的砂卵石地基承载力较高,沉降量小且均匀,能够满足高层建筑基础设计要求,适宜在洛(阳)南新区高层建筑地基处理中推广.