Bearing capacity of offshore umbrella suction anchor foundation in silty soil under varying loading modes

Considering the current disadvantages of present offshore wind turbine foundations, a novel anchor foundation with skirt and branches is proposed, called offshore umbrella suction anchor foundation (USAF). A series of experiments and numerical simulations were performed to explore the bearing capacity of the USAF under various kinds of loading modes. The bearing characteristics and the anchor–soil interactions are described in detail for horizontal static loading, horizontal cyclic loading, and an antidrawing (pullout) test in silty soil. In the static loading test, the load–deflection of the anchor under step loading was analyzed and the normalized curve of the load–deflection was obtained to determine the ultimate horizontal bearing capacity of the anchor under normal working conditions. Under horizontal cyclic loading, the relationship between the plastic cumulative deformation and cyclic number was determined. In addition, the responses of USAF were investigated for a low wave frequency and storm surges. In the drawing test, it was found that a “segmentation phenomenon” occurred during the test. Moreover, a method to identify the maximum antidrawing load of USAF was provided based on dynamic mechanics. The numerical results show that the use of anchor branches and skirt can enhance the bearing performance of USAF to a certain degree. However, the anchor branch has a slight positive influence on the bearing performance improvement. The USAF is not only similar to a stiff short pile, but a rotation occurs. The failure envelope under composite loading (V-M) was obtained and the changes associated with changes in the aspect ratio of the internal compartment were clarified.     

Response and capacity of monopod caisson foundation under eccentric lateral loads

Monopod caisson foundation is a viable alternative for supporting offshore wind turbines located at shallow water depths. This foundation system has to resist overturning moment generated due to resultant lateral load, arising from wind and water wave action, that can act at any loading height above the seabed. This paper presents results of a numerical investigation performed to determine the influence of loading height, caisson geometry and superstructure load on the ultimate lateral capacity, initial stiffness, and soil failure zone of the foundation, when installed in very dense sand. Both the ultimate and serviceable states of the caisson foundation obtained from the analyses are represented in terms of envelopes plotted between lateral load and overturning moment. Simplified expressions, which take into account the influence of caisson geometry, loading height, and soil properties, are also presented to serve as a preliminary base for design of the monopod caisson foundation.     

Wave-like aquatic propulsion of mono-hull marine vessels

The present paper describes results of the experimental investigation of a small-scale mono-hull model boat propelled by a localised flexural wave propagating along the plate of finite width forming the boat's keel. Forward propulsion of the boat was achieved through flexural wave propagation in the opposite direction, which is similar to the aquatic propulsion used in nature by stingrays. The model boat under consideration underwent a series of tests both in a Perspex water tank and in an experimental pool. In particular, the forward velocity of the boat has been measured for different frequencies and amplitudes of the flexural wave. The highest velocity achieved was 32 cm/s. The thrust and propulsive efficiency have been measured as well. The obtained value of the propulsive efficiency in the optimum regime was 51%. This indicates that the efficiency of this type of aquatic propulsion is comparable to that of dolphins and sharks (around 75%) and to that of a traditional propeller (around 70%). In contrast with a propeller though, the wave-like aquatic propulsion has the following advantages: it does not generate underwater noise and it is safe for people and marine animals.     

利用短期静态PPP结果反演海潮负荷位移

采用香港11个GPS测站的观测资料进行1 h、2 h、3 h和4h静态PPP解算,获得4组PPP坐标序列,利用调和分析求取11个测站处8个主要分潮的负荷位移参数（振幅和相位）,将其与海潮模型计算的负荷位移参数进行对比,并比较分析PPP反演值与海潮模型值改正海潮负荷信号的效果。结果表明,垂直和水平方向上,不同PPP结果反演8个分潮的负荷位移分别具有约5 mm和7 mm的差异;PPP反演8个分潮垂向负荷位移优于全球海潮模型,但水平方向上的反演效果稍弱。     

海洋资源承载力指标体系的设计与评价

在探讨海洋资源承载力指标体系设计原则的基础上,构建了科学、系统、可操作的海洋资源评价指标体系。运用专家咨询法筛选指标,对广东省的海洋资源承载力进行分析,指出广东省海洋资源的承载力在逐年下降,广东各地的海洋资源承载力各不相同,应依据海洋资源承载力对海洋经济政策进行选择。     

建筑群负荷引起的大地水准面起伏及对高程的影响(英文)

The paper studies the ground vertical deformation and the geoid undulation caused by loading of neighboring buildings, based on the loading tides theory. The influence on elevation is also considered. The results show that the ground vertical deformation and the geoid undulation both reach millimeter magnitude. Therefore, it is obvious that the building loading significantly affects the precise engineering surveying, and it must be seriously considered in application.      

海洋纤维增强热塑性立管极限承载拉力预测方法

海洋新型纤维增强热塑性立管因其可盘卷、耐腐蚀、耐疲劳和轻质化等优点,在深水油气开发中应用前景十分广阔。热塑性立管具有复合材料的各向异性、受力耦合效应及复杂的本构关系,且承受浮体运动和复杂海洋环境载荷,其失效模式尚未明确。针对轴对称载荷作用下纤维增强热塑性立管极限承载力问题,进行热塑性管稳态热传导和热应力的理论推导,求解了稳态温度和应力分布,首次给出了在任意温度载荷作用下管体径向位移的解析解,并直接求解其径向、轴向、环向和剪切应力。采用各向同性层Von Mises和各向异性层最大应力（Max Stress）准则或Tsai-Hill准则判定热塑性管的失效,基于应力分布、失效准则和二分法计算了热塑性管的极限载荷。温度载荷、纤维铺设角度和径厚比对管道的应力分布影响显著。不同温度载荷会改变失效指数沿径向的变化趋势,增大轴向拉力将增大热塑性管的失效指数,选用不同的失效准则在管体失效判定上存在一定的差异。热塑性管温度越低、纤维铺设角越小及径厚比越大,管道对轴向拉伸载荷的承载能力越强。     

A coupling method for soil structure interaction problems

This paper describes a soil‐structure coupling method to simulate blast loading in soil and structure response. For the last decade, simulation of soil behavior under blast loading and its interaction with semi buried structure in soil becomes the focus of computational engineering in civil and mechanical engineering communities. In current design practice, soil‐structure interaction analysis often assumes linear elastic properties of the soil and uses small displacement theory. However, there are numerous problems, which require a more advanced approach that account for soil‐structure interaction and appropriate constitutive models for soil. In simplified approaches, the effect of soil on structure is considered using spring‐dashpot‐mass system, and the blast loading is modeled using linearly decaying pressure–time history based on equivalent trinitrotoluene and standoff distance, using ConWep, a computer program based on semi‐empirical equations. This strategy is very efficient from a CPU time computing point of view but may not provide accurate results for the dynamic response of the structure, because of its significant limitations, mainly when soil behavior is strongly nonlinear and when the buried charge is close to the structure. In this paper, both soil and explosive are modeled using solid elements with a constitutive material law for soil, and a Jones–Wilkins–Lee equation of state for explosive. One of the problems we have encountered when solving fluid structure interaction problems is the high mesh distortion at the contact interface because of high fluid nodal displacements and velocities. Similar problems have been encountered in soil structure interaction problems. To prevent high mesh distortion for soil, a new coupling algorithm is performed at the soil structure interface for structure loading. The coupling method is commonly used for fluid structure interaction problems in automotive and aerospace industry for fuel sloshing tank, and bird impact problems, but rarely used for soil structure interaction problems, where Lagrangian contact type algorithms are still dominant. Copyright © 2012 John Wiley & Sons, Ltd.     

Elastic fields in two joined transversely isotropic media of infinite extent as a result of rectangular loading

This paper presents the closed‐form solutions for the elastic fields in two bonded rocks induced by rectangular loadings. Each of the two bonded rocks behaves as a transversely isotropic linear elastic solid of semi‐infinite extent. They are completely bonded together at a horizontal surface. The rectangular loadings are body forces along either vertical or horizontal directions and are uniformly applied on a rectangular area. The rectangular area is embedded in the two bonded rocks and is parallel to the horizontal interface. The classical integral transforms are used in the solution formulation, and the elastic solutions are expressed in the forms of elementary harmonic functions for the rectangular loadings. The stresses and displacements in the rocks induced by both the horizontal and vertical body forces are also presented. The numerical results illustrate the important effect of the anisotropic bimaterial properties on the stress and displacement fields. The solutions can be easily implemented for numerical calculations and applied to problems encountered in rock mechanics and engineering. Copyright © 2011 John Wiley & Sons, Ltd.     

Nonlinear analysis of laterally loaded rigid piles in cohesive soil

This article presents a method for the nonlinear analysis of laterally loaded rigid piles in cohesive soil. The method considers the force and the moment equilibrium to derive the system equations for a rigid pile under a lateral eccentric load. The system equations are then solved using an iteration scheme to obtain the response of the pile. The method considers the nonlinear variation of the ultimate lateral soil resistance with depth and uses a new closed‐form expression proposed in this article to determine the lateral bearing factor. The method also considers the horizontal shear resistance at the pile base, and a bilinear relationship between the shear resistance and the displacement is used. For simplicity, the modulus of horizontal subgrade reaction is assumed to be constant with depth, which is applicable to piles in overconsolidated clay. The nonlinearity of the modulus of horizontal subgrade reaction with pile displacement at ground surface is also considered. The validity of the developed method is demonstrated by comparing its results with those of 3D finite element analysis. The applications of the developed method to analyze five field test piles also show good agreement between the predictions and the experimental results. The developed method offers an alternative approach for simple and effective analysis of laterally loaded rigid piles in cohesive soil. Copyright © 2011 John Wiley & Sons, Ltd.