壤中游离气方法及其在油气化探中的应用

油气藏中的轻烃气体能够以微弱但可检出的量近似垂直地渗漏到地表土壤中,其中一部分烃类以游离态赋存在土壤或岩石颗粒空隙中.壤中游离气中的烃类能反映深部油气藏烃类的现代补偿性活跃微渗漏,被认为是油气地球化学勘探的最可靠方法之一.壤中游离气采集是获得第四系沉积层中微渗漏烃类地球化学异常的关键技术.自行研制了便携式游离气采集新装...     

虾夷扇贝天然苗种筛选装置的研究与应用

随着贝类底播增养殖产业的迅猛发展,为保证底播贝苗的成活率,养殖企业对天然苗种更加重视。天然苗种采用中间育成方法,需要对苗种进行筛选作业,但目前筛选作业仍以人工作业为主,存在作业效率低、劳动强度大等问题。作者通过对大连地区虾夷扇贝(Patinopecten yessoensis)天然苗种筛选作业调研的基础上,设计了满足生产实际需求的扇贝苗种筛选装置,可实现3种规格贝苗的筛选作业。试验分2阶段进行,第1阶段对影响筛选准确性的因素进行正交分析于验证,确定了最佳工艺参数;第2阶段在大连旅顺进行的生产性对比试验得出,机械筛选的平均准确率为91.33%,误差率低于10%,且5组筛选结果无显著性差异(P0.05);同时机械筛选的平均作业效率为80g/(人/min),约为人工筛选作业效率的8倍。由此说明扇贝苗种筛选装置具有较高的准确性、稳定性和高效性,具有推广应用价值。     

增强型AlGaN/GaN高电子迁移率晶体管高温退火研究

深入研究了两种增强型AlGaN/GaN高电子迁移率晶体管(HEMT)高温退火前后的直流特性变化.槽栅增强型AlGaN/GaN HEMT在500 ℃ N₂中退火5 min后,阈值电压由0.12 V正向移动到0.57 V,器件Schottky反向栅漏电流减小一个数量级.F注入增强型AlGaN/GaN HEMT在 400 ℃ N₂中退火2 min后,器件阈值电压由0.23 V负向移动到-0.69 V,栅泄漏电流明显增大.槽栅增强型器件退火过程中Schottky有效势垒     

Analytical method of radiation by a wave energy device with dual rectangular floating bodies

The system with one floating rectangular body on the free surface and one submerged rectangular body has been applied to a wave energy conversion device in water of finite depth. The radiation problem by this device on a plane incident wave is solved by the use of an eigenfunction expansion method, and a new analytical expression for the radiation velocity potential is obtained. The wave excitation force is calculated via the known incident wave potential and the radiation potential with a theorem of Haskind employed. To verify the correctness of this method, an example is computed respectively through the bound element method and analytical method. Results show that two numerical methods. are in good agreement, which shows that the present method is applicable. In addition, the trends of hydrodynamic coefficients and wave force are analyzed under different conditions by use of the present analytical method.     

船载物探电子设备的接地问题及解决方案

船栽物探电子设备,是一个电气结合复杂的数据采集记录系统.各系统电子线路因船舶配电方式、工作环境的特殊性,其接地很重要,但容易被忽视.而接地处理不当,在使用时会受到噪声干扰、振荡;或造成仪器的输出榆入电路损坏,不能正常工作.更严重地甚至机壳漏电,危及人身安全.船栽物探电子设备接地问题.可分为"接地保护"和"接地故障"."接地保护"是将电气设备的金属外壳、支架和电缆的护套与大地等单位的金属船体(船壳)作永久性良好的电气连接,它分为保护接地和功能接地."接地故障"是指因设备不正确接地或由于绝缘层的破损、老化及环境恶劣引起绝缘电阻低下或者接地干扰等问题.文中从船载物探电子设备的使用特性出发.讨论在实际接地处理中出现问题的原因,分析了各种接地干扰的原理.并提出了相应的解决方案,对于船栽物探电子设备的实际安装应用有一定的指导意义.     

Primary cracking of kerogens. Experimenting and modelling C1, C2–C5, C6–C15 and C15+ classes of hydrocarbons formed

Mathematical models of hydrocarbon formation can be used to simulate the natural evolution of different types of organic matter and to make an overall calculation of the amounts of oil and/or gas produced during this evolution. However, such models do not provide any information on the composition of the hydrocarbons formed or on how they evolve during catagenesis.From the kinetic standpoint, the composition of the hydrocarbons formed can be considered to result from the effect of “primary cracking” reactions having a direct effect on kerogen during its evolution as well as from the effect of “secondary cracking” acting on the hydrocarbons formed.This report gives experimental results concerning the “primary cracking” of Types II and III kerogens and their modelling. For this, the hydrocarbons produced have been grouped into four classes (C₁, C₂–C₅, C₆–C₁₅ and C₁₅₊). Experimental data corresponding to these different classes were obtained by the pyrolysis of kerogens with temperature programming of 4°C/min with continuous analysis, during heating, of the amount of hydrocarbons corresponding to each of these classes.The kinetic parameters of the model were optimized on the basis of the results obtained. This model represents the first step in the creation of a more sophisticated mathematical model to be capable of simulating the formation of different hydrocarbon classes during the thermal history of sediments. The second step being the adjustment of the kinetic parameters of “secondary cracking”.     

多功能雾化室在ICP—AES中的应用研究

本文研究了一种多功能雾化室装置,以探索ICP-AES技术中溶液进样的新方式;并对雾化系统的主要参数进行测试,取得最佳的匹配条件。该雾化室装置包括旋流雾化、循环雾化和氢化-雾化等系统,可在同一操作条件下进行工作,适应多种分析的需要。并可任意选择合适的雾化射程来增强元素谱线强度的信背比和雾化的稳定性,以达到改善分析的精密度和检出限。     

DPP100－3型钻机改型设计中的几个问题

讨论了ＤＰＰ１００－３型钻机在改型设计中动力匹配，改换汽车底盘的轴荷分配，改装部分的传动装置布置等，主要以选用ＣＡ１４１Ｓ型汽车底盘的改型设计为例进行说明。     

相位激电法(偶极-偶极)单频电磁耦合校正方法

主要介绍一种相位激电法(偶极—偶极,以下简称偶极)电磁耦合校正方法,其原理是将视电阻率近似视为均匀大地电阻率,利用均匀大地条件下偶极装置电磁感应响应的正演计算方法,算出电磁感应响应,再将其从观测的总响应中去除,从而达到电磁耦合校正的目的。     

光学转像变倍微分方程的建立及其应用

建立了光学转像变倍微分方程，并应用于军械瞄准具无焦系统连续变倍过程的分析，给出两个数字例子的高斯光学设计结果