矿物反应与变形关系研究——以糜棱岩高温高压实验为例

矿物反应和变形局部化在中下地壳普遍存在,两者相互影响和促进。实验研究表明,矿物反应与变形关系非常复杂。本文在糜棱岩高温高压流变实验的基础上,分析了实验变形样品中的矿物反应分布特征以及矿物反应引起的化学成分变化,讨论了矿物反应与变形的相互影响。微观结构分析表明,实验变形后的糜棱岩样品在温度800~890℃时,角闪石和黑云母出现脱水反应,生成微晶角闪石和黑云母,并伴有局部熔融。受应变局部化控制,脱水反应产物主要出现在黑云母、角闪石条带边缘。微晶和熔体的成分分析表明,不仅脱水反应形成的微晶与熔体的SiO 2含量非常低,而且黑云母周围的反应产物和熔体主要来自于黑云母的脱水,角闪石边缘的反应产物和熔体主要来自于角闪石脱水,石英、钾长石和斜长石没有参与反应与熔融。本研究中的脱水反应产物中,没有发现辉石和石榴石,这种脱水反应与文献中报道的无局部化的均匀样品在静高压和高熔融比例条件的脱水反应产物和熔体的成分有很大差别。黑云母和角闪石的局部化分布和脱水程度低,可能是造成脱水反应产物有差别的巨大原因。在本实验结果中,脱水反应对变形的影响主要体现为,脱水反应产生了细粒混合矿物相,使得在局部化的剪切带内变形机制从位错蠕变转变为扩散蠕变,导致样品出现应变弱化。另外脱水反应还引起了局部脆性破裂。变形引起晶体塑性变形,增加了位错密度和矿物细粒化,促进了晶体内部成核和黑云母与角闪石的脱水分解;差应力作用增加了局部的正应力和平均应力,增加了黑云母和角闪石能够稳定存在的压力范围,这可能是反应产物以微晶黑云母和角闪石为主,而没有转化为辉石的原因。     

Testing for the occurrence of pilchard herpesvirus (PHV) in South African sardine Sardinops sagax

Catches of South African sardine Sardinops sagax have declined in recent years from about 200 000 t harvested annually during the period 2002–2006 to less than 100 000 t. Consequently, some companies are now importing sardine from sources elsewhere in the world to meet local demand for canned sardine and bait. This importation has the potential for the introduction of sardine pathogens, in particular the pilchard herpesvirus (PHV), which could have a negative impact on the currently small South African sardine population. The aims of the current study were to determine whether PHV is present in the local sardine population and to assess the extent to which sardine is being imported into the country and whether imported fish are from countries where the virus is known to be endemic. Fish sampled from South Africa’s western (n = 150), southern (n = 182) and eastern (n = 96) putative stocks of S. sagax were analysed for the presence of PHV using real-time quantitative polymerase chain reaction (qPCR). The origin and amount of potentially infected material imported into South Africa during the period 2010–2014 was also assessed. None of the South African sardine collected during this study tested positive for PHV, suggesting that active PHV was not prevalent in the local population of S. sagax at the time of this study. Between 56 000 and 71 000 t of frozen sardine was imported annually into South Africa from countries where S. sagax occurs, including some from areas (Australia and New Zealand) where sardine infection by PHV is known to be endemic. Hence, it is plausible that the PHV pathogen, capable of perpetuating infections in local sardine populations, could be imported into South Africa along with the importation of frozen sardine. Should local sardine be naïve to the virus, as suggested by this study, then the population is at risk of infection and precautions against such must be taken.     

大菱鲆的受精细胞学研究

对大菱鲆（Psetta maxima）的受精过程进行细胞学观察发现,大菱鲆从精子入卵、皮层反应、卵母细胞第二次成熟分裂排出第二极体、雌雄原核形成与融合,直到舍子进行第一次有丝分裂,与其他已经报道的硬骨鱼的受精程序基本相同。在受精的整个过程中所有观察过的受精卵都只发现一个精子形成原核,并最终与卵原核结合形成舍子,由此判断大菱鲆的受精方式是单精受精。     

酸性环境下类砂岩材料物理性质的试验研究

采用酸性环境下的加速试验方法,研究了不同时段类砂岩材料-砂浆的物理性质,测试了试样的波速,监测了溶液中H+、Ca2+浓度变化,发现在不同腐蚀阶段砂浆表现出来的物理性质相差较大,其反应过程具有阶段性和Ca2+离子溶出具有滞后性的特点。同时,对不同尺寸试样受酸腐蚀的影响程度进行了对比分析,为酸雨地区岩石和混凝土性质的研究提供了可借鉴的思路。     

Polymetamorphic history of a relict Permian hornfels from the central Gran Paradiso Massif (Western Alps,Italy): a microstructural and thermodynamic modelling study

A petrological and thermobarometric study of the Lago Teleccio hornfelses was undertaken to reconstruct the polymetamorphic evolution and constrain the P–T conditions of Permian contact metamorphism. The Lago Teleccio metasedimentary rocks record a Variscan regional metamorphism characterized by amphibolite facies mineral assemblages including quartz, plagioclase, K‐feldspar (Kfs 1), biotite, garnet (Grt 1) and staurolite; this was followed by a late‐Variscan mylonitization event. Metamorphism of the Variscan metamorphic rocks at the contact with a Permian granitic intrusion produced static recrystallization and/or new growth of quartz, garnet (Grt 2), plagioclase, K‐feldspar (Kfs 2), cordierite, green spinel, biotite and prismatic sillimanite (Contact 1). This thermal event, which occurred at a peak pressure of 0.23–0.35 GPa, temperature of 670–700 °C and a_H2O of 0.75–1, was followed either during post‐contact metamorphism cooling or, more likely, during the early‐Alpine metamorphism by the breakdown of cordierite into an anhydrous kyanite + orthopyroxene + quartz assemblage. The poorly developed early‐Alpine eclogite facies metamorphism (Alpine 1) was characterized by relatively anhydrous mineral associations and low strain, which locally produced coronitic and pseudomorphous microstructures in metasedimentary rocks, with scanty formation of jadeite, zoisite and a new high‐pressure garnet (Grt 3). Greenschist facies retrogression (Alpine 2) was characterized by the local development of a chlorite‐ and muscovite‐bearing mineral association, suggestive of aqueous fluid incursion. In the hornfelses, the limited extent of metamorphic overprinting is suggested by the fine grain size of the Alpine mineral associations, which formed at the expense of the Permian contact metamorphic associations, and was favoured by the anhydrous mineralogy of the hornfelses.     

Early Palaeozoic sub-arc chromitite-bearing peridotite in the Kudi ophiolite on the westernmost Tibetan Plateau

ABSTRACT

A chromite deposit was discovered in the Kudi ophiolite in the Palaeozoic western Kunlun orogenic belt. Chromite forms elongated (<2 m in width) and banded chromitite bodies (<0.1 m in width for each band) in dunite and podiform chromitite bodies (<1.5 m in width) in harzburgite. Dunite is classified into two types. Type I dunite hosting massive and banded chromitites shows low Fo in olivine (88.1–90.9), moderate Cr^# [=Cr/(Cr + Al), 0.47–0.56] in chromite, and a positively sloped primitive mantle-normalized platinum group elements (PGE) pattern, suggesting that it is a cumulate of a mafic melt. Harzburgite and type II dunite show olivine with high Fo (>91.1) and chromite with moderate to high Cr^# (0.44–0.61), and flat to negatively sloped primitive mantle-normalized PGE patterns, indicating that they are residual mantle peridotite after partial melting. Chromite in all three types of chromitites has relatively uniform moderate values Cr^# ranging from 0.43 to 0.56. Massive chromitite contains euhedral chromite with high TiO₂ (0.40–0.43 wt.%) and has a positively sloped primitive mantle-normalized PGE pattern, suggesting that it represents a cumulate of a melt. Rocks containing disseminated and banded chromite show overall low total PGE, < 117 ppb, and a negatively sloped primitive mantle-normalized PGE pattern. Chromite grains in these two types of occurrences are irregular in shape and enclose olivine grains, suggesting that chromite formed later than olivine. We suggest that chromite-oversaturated melt penetrated into the pre-existing dunite and crystallized chromite. The oxygen fugacity (fO₂ values of chromitites and peridotites are high, ranging from FMQ+0.8 (0.8 logarithmic unit above the fayalite-magnetite-quartz buffer) to FMQ+2.3 for chromitites and from FMQ+0.9 to FMQ+2.8 for peridotites (dunite and harzburgite). The mineral compositions and high fO₂ values as well as estimated parental magma compositions of the chromitites suggest that the Kudi ophiolite formed in a sub-arc setting.     

以分析有机磷农药为例研究多反应气-负化学电离源质谱的行为

在气相色谱-质谱分析中,负化学电离源质谱特别适合于高电负性目标物的分析,但不同反应气的对比研究工作至今未见报道。本研究采用甲烷、异丁烷、氨气、甲烷+氨气混合气、异丁烷+氨气混合气作为反应气,在负化学离子源内对电负性较高的有机磷农药进行电离实验,对反应气压力、离子源温度、灯丝发射电流等多项参数进行了考察。结果表明:采用纯氨气作为反应气,检测背景低,质谱真空负荷小,并可在负化学源质谱上获得最高的灵敏度。配合加速溶剂萃取方法,对土壤中的有机磷农药残留进行分析,方法全流程回收率为73.3%～108.1%,精密度为2.5%～8.8%,检出限为0.01～0.32μg/kg,各项指标均可满足实际样品测试需求。     

大气压电离质谱及其用于超高纯气体分析研究进展

超高纯气体在工业生产中有非常重要的地位,如半导体工业中电子气的质量直接影响半导体器件的性能,百万分之几的微量杂质气体便可导致集成电路中元件存储信息量的减少。越来越高的气体纯度要求对分析方法及仪器的灵敏度提出了很大的挑战。大气压电离质谱(APIMS)由于可以在大气压条件下对杂质进行电离,并伴随高效的电离方式,因此具有极高的灵敏度,成为超高纯气体杂质分析中极为有效的技术手段,特别适合检测10^-9 mol/mol甚至10^-12 mol/mol浓度量级的气体杂质。APIMS采用电晕放电及⁶³Ni两种电离源,通常以电晕放电电离源为主,质量分析器常采用四极杆,同时为适应超高纯气体分析,APIMS配备了气体进样系统及可将标准气体稀释产生校正气体的稀释系统。APIMS对杂质检测的灵敏度与杂质的电离方式密切相关,电荷传递是杂质电离最主要的一种方式,适用于电离能相差较大的底气与杂质,常见的N₂、Ar由于电离能较高,其中的大部分杂质均可依靠该方式测定;质子转移反应的应用通常与H₂有关,常用于H₂中杂质的测定,也可以通过添加H₂的方法促进对Ar中N₂杂质的检测;运用形成团簇离子的反应尽管较少,但亦有报道,通过监测团簇离子O₂⁺·H₂O,可提高O₂中杂质H₂O的检测灵敏度。依据不同的电离反应,可以设计对不同杂质的测定方式,实现对痕量、超痕量杂质的检测。APIMS检测灵敏度通常比电子轰击电离质谱(EI/MS)高10⁴~10⁶倍,因此目前依然是超高纯气体分析中不可替代的仪器方法,但在某些方面如对有腐蚀性电子特气的分析,方法灵敏度有待提高。     

高温下TiO2的相转变动力学及后期颗粒生长研究

利用原位高温XRD方法测量了锐钛矿相TiO2在不同温度下(850、863、875、888、900℃)时间与转化率之间的关系,证实锐钛矿-金红石相转变为一级反应。计算的相转变活化能为432.788±25.657 kJ/mol,指前因子为4.847 454×1015 s-1。利用ESEM观察了样品在相转变完成后,经历不同温度(888、900、930、960、1 000℃)相同烧结时间(10 h),和相同温度(1 000℃)不同烧结时间(0、5、10、15、20 h)下颗粒晶型变化和颗粒长大情况。在1 000℃以下时,温度对颗粒粒度的影响并不明显,并且不出现完好的晶型。1 000℃时,随着时间的延长,颗粒粒度不断增大,并在10 h以后出现完好晶型。根据lnDt(Dt为t时间下颗粒的平均粒度)和lnt的关系图,认为颗粒生长应经过两个不同时期。     

不同共代谢基质下三氯乙烯的厌氧生物降解研究

使用已驯化的厌氧活性污泥,分别以纯牛奶、玉米汁和甲苯作为共代谢基质,对三氯乙烯（ TCE）的降解性能进行对比研究。结果表明：TCE是通过还原脱氯发生降解的;同质量浓度下,甲苯是最佳共代谢基质,纯牛奶和玉米汁相对较差;且在一定范围内,共代谢基质浓度越大,TCE降解效果越好;实验数据的回归结果表明,反应均符合一级动力学。