基于ArcObjects的土地利用时空分析系统研究

随着愈加快速的土地资源开发,土地利用时空变化研究已全面启动,本文结合ArcObjects组件、Access数据库和VC 工具开发了一个土地利用时空分析系统,实现了土地利用空间数据建库、地图查询分析、土地利用时空模型解算等功能。为土地利用时空研究提供功能集成的数据运算与图形处理平台,也为土地利用规划的制定及其修编等工作提供了技术支持。     

西安市城市资源压力与城市化水平的灰色关联分析

统计结果显示西安城市化水平的提高也伴随着城市资源压力的加大,为了找出它们之间定量的数字特征关系,运用综合评价法对西安市近15年的城市化水平进行了测度.同时,使用资源压力指数法对西安市城市资源压力进行了定量评价,最后,用灰色关联分析方法对城市资源压力指数与城市化水平的各相关因子之间的关系进行研究.结果表明,城市资源压力与最能体现城市化发展水平的"城市现代化水平"因子之间存在着极强的关联,针对这一现状,提出了缓解城市资源压力和协调加快城市化发展进程之间矛盾的几点建议.     

基于GIS的天水市区南北两山生态敏感性分析

基于地理信息系统（GIS）的空间分析技术对生态敏感性进行了分析研究,按得分与赋权重的方法,研究出四个级别的敏感性分布,为天水市的规划提供了可靠的科学判断和决策依据,     

基于GIS的北京山区优势林分生态位分析

应用生态位理论,以北京山区森林资源为研究对象,分析优势林分的空间分布及其资源利用和环境适应能力的差异。基于GIS方法,建立优势林分空间分布数据库以及资源梯度信息数据库,分别采用Levins公式和Smith公式,在水分、热量、光照和土壤质量4维环境因子梯度上测定了研究区8个优势林分的生态位宽度,采用Pianka公式测定生态位重叠。结果表明:Smith公式考虑资源可利用性,得到的生态位宽度更能客观地反映优势林分资源空间利用程度;研究区各优势林分重叠度普遍较大,反映了对环境要求的相似性及资源共享的趋势性。     

长山群岛港口地域组合空间结构演化定量分析

在国内外相关研究文献综述的基础上,构建了港口联系强度指数和综合基尼系数,对1986~2004 年长山群 岛港口地域组合空间结构的演化特征进行定量分析,认为从1986 年到2004 年,大长山港口组合单元一直是长山 群岛最重要的门户港,长山群岛港口地域组合整体上看是趋向集中。并对长山群岛陆岛连接方案进行论证,对陆岛 连接工程建设后长山群岛港口地域组合空间结构进行情景分析,“大连———长山群岛”之间的连接、联系方式、途径 发生了变化,这将使长山群岛港口地域组合的空间结构大为改观。对长山群岛港口地域组合空间结构的演化趋势 进行预测。     

青藏高原地面加热场与四川主汛期降水及伏旱关系

分析了高原地面加热场强度距平指数与四川盆地伏旱及主汛期降水的联系。结果表明,高原前期加热强度同四川盆汛期降水和伏旱程度密切相关。把这些关系引入汛期降水预测模型对提高短期气候预测能力有一定积极意义。     

The effect of Ca-Tschermaks component on trace element partitioning between clinopyroxene and silicate melt

We have studied the influence of Ca-Tschermaks (Calcium Tschermaks or CaTs) content of clinopyroxene on the partitioning of trace elements between this phase and silicate melt at fixed temperature and pressure. Ion probe analyses of experiments carried out in the system Na₂O–CaO–MgO–Al₂O₃–SiO₂, at 0.1 MPa and 1218°C, produced crystal-melt partition coefficients (D) of 36 trace elements (Li, Cl, Sc, Ti, V, Cr, Fe, Co, Ge, Sr, Y, Zr, Nb, Mo, Ru, Rh, In, Sn, Sb, Ba, La, Ce, Pr, Nd, Sm, Eu, Gd, Tb, Dy, Ho, Er, Tm, Yb, Lu, Hf, Ta and W), for clinopyroxene compositions between 10 and 32 mol% CaTs. Partition coefficients for 2+ to 5+ cations show, for each charge, a near parabolic dependence of log D on ionic radius of the substituting cation, for partitioning into both the M1 and M2 sites of clinopyroxene. Fitting the results to the elastic strain model of Blundy and Wood [Blundy, J.D., Wood, B.J., 1994. Prediction of crystal-melt partition coefficients from elastic moduli. Nature 372, 452–454] we obtain results for the strain-free partition coefficients of theoretical cations (D₀), with site radius r₀, and for the site's Young's Modulus (E).

In agreement with earlier data our results show that increasing ^ivAl concentration in cpx is matched by increasing D, E_M1, E_M2 and D₀ for tri-, tetra- and pentavalent cations. The degree of fractionation between chemically similar elements (i.e. Ta/Nb, Zr/Hf) also increases. In contrast, D values for mono-, di- and hexavalent cations decrease with increasing ^ivAl in the cpx. The large suite of trace elements used has allowed us to study the effects of cation charge on D₀, r₀ and E. We have found that D₀ and r₀ decrease with increasing cation charge, e.g. r₀=0.66 Å for 4+ cations and 0.59 Å for 5+ cations substituting into M1. Values of E_M1 and E_M2 increase with cation charge as well as with increasing ^ivAl content. The increase in E_M2 is linear and close to the trend set by Hazen and Finger [Hazen, R.M., Finger, L.W., 1979. Bulk modulus-volume relationship for cation–anion polyhedra. J. Geophys. Res. 84 (10) 6723–6728] for oxides. E_M1 values are much higher and do not fit the trend predicted by the Hazen and Finger relationship.     

Negative Ce Anomaly in the Indian Banded Iron Formations: Evidence for the Emergence of Oxygenated Deep-Sea at 2.9-2.7 Ga

Abstract: Major and rare earth element contents are reported for Late Archean banded iron formations (BIFs) in the Bababudan Group of the Dharwar Craton, South India. The BIFs are mostly composed of SiO₂ (average1ρ = 54.88.1 wt%) and Fe₂O₃* (44.38.2 wt%). The Al₂O₃ and TiO₂ contents are remarkably low, suggesting that detrital components were starved during the BIF deposition. The BIFs have a LREE-enriched pattern with a relatively high (La/Yb)_N (6.644.07). Total REE concentrations (RE) vary from 5.2 to 65.3 ppm. The REE patterns are characterized by the presence of a very large negative Ce anomaly (Ce/Ce*: 0.13-0.83) and a positive Eu anomaly (Eu/Eu*: 0.96-2.45). The Eu/Eu* decreases and (La/Yb)_N increases with a increase of RE. These correlations of REE indices are similar to those of modern hydrothermal iron-rich sediments near a mid-ocean ridge (MOR). Greenstones associated with the BIFs have MORB-like geochemical features. These geochemical and geological lines of evidence indicate that the depositional site of the BIFs was remote from a continent and/or island arc and that the BIFs were in situ hydrothermal sediments near a MOR. A striking negative Ce anomaly in the BIFs indicates that oxygenated deep-sea environments emerged at 2.9-2.7 Ga. The existence of contemporaneous Mn deposits in the Dharwar Craton supports this assertion. Our scenario of oxygen in the Earth's surface of the Late Archean is different from long-held notion that the atmosphere and ocean were persistently anoxic throughout the Archean.     

Numerical Simulation of 3D Borehole‐to‐Surface Electrical Method

The anomaly response characteristics of the vertical line‐source 3D borehole‐to‐surface model are simulated by an adaptive finite element method. The calculation shows that the anomaly in the radial direction is pressed and the closer to the source, the more pronounced, the anomaly is stretched in the direction perpendicular to the radius. Adding a B pole in the Y direction can offset the effect of stretching to some extent. The anomaly that is closer to the source of the profile is clearer than the anomaly that is far from the source. The research results are of great significance for guiding the practical application of the borehole‐to‐surface electrical method.     

含粗粒金矿样品采集加工与分析研究进展

含粗粒金矿,由于粗粒金的存在使其样品的采集、加工和分析极具挑战性,如何获得具有代表性和均匀性的化学分析样品,并提供准确的分析结果,长期以来一直是该类金矿资源勘查评价急待解决的技术难题。本文对近年来国内外含粗粒金矿样品的采集、加工和分析方法等3方面开展的研究工作及主要成果进行归纳分析,认为:1含粗粒金矿样品的采集是确保样品代表性的首要环节,含粗粒金矿样品分析结果的潜在误差有80%来源于样品采集,因此研究经济、有效的样品采集方法至关重要。2含粗粒金矿样品的加工主要从提高自然金的粉碎度,改进加工流程,选择样品加工设备等方面进行,但查明金的粒度分布及伴生矿物是拟定样品加工流程的关键。3含粗粒金矿样品的分析方法有常规的化学分析方法、批量浸金法和人工重砂加权平均法,相对于复杂的加工流程研究,后者有望成为此类样品经济有效的分析方法。本文指出,含粗粒金矿资源评价质量的误差来源于地质、采样、加工、分析等诸多方面,总体而言应最小化所有阶段误差,应特别重视样品采集方法的研究,确保采集样品的代表性是提高该类金矿资源评价质量的前提。