贵州都匀大亮锌矿床闪锌矿稀土元素地球化学特征及其指示意义北大核心CSCD

贵州都匀大亮锌矿床是牛角塘铅锌矿田的重要组成部分,目前所开采的对象为近年来在“陡倾斜带”中新发现的矿体,其研究还十分薄弱。本研究采用ICP-MS测试技术,对大亮锌矿闪锌矿进行了稀土元素测试,以揭示该矿床成矿作用。结果表明,10件闪锌矿样品的ΣREE值低,质量分数为(0.15~0.40)×10^(-6)(平均0.24×10^(-6))。样品的LREE/HREE值变化范围为7.07~15.76(平均10.95),(La/Yb)_(N)值范围为4.75~28.57(平均11.54),(La/Sm)_(N)值为2.16~6.01(平均3.49),(Gd/Yb)^(N)值为0.34~3.68(平均1.67)。闪锌矿样品稀土元素呈现轻稀土富集的右倾模式,且轻稀土元素的分异程度远远高于重稀土元素。样品具有显著Eu正异常(δEu为6.60~54.29,平均18.10),无明显的Ce异常(δCe主要为0.93~1.09,平均1.01)。闪锌矿轻稀土富集及显著Eu正异常的特点表明,其稀土元素为矿石初始沉淀时从成矿热液中继承而来,未明显受到后期地质作用的影响。稀土元素特征表明该闪锌矿形成于较低温度和极强还原条件。大亮锌矿闪锌矿Y/Ho比值为11.33~32.17(平均22.71),与区域矿床及地层的对比表明成矿物质主要来自下伏地层,可能有少量来自赋矿围岩。     

云南金厂金矿床蚀变超基性岩体与金的成矿作用

金矿化与蚀变超基性岩体的空间关系、矿化特征、蚀变超基性岩体、成矿流体、微量元素、硫同位素组成、表明金主要来源于金厂蛇纹石化、滑石化、碳酸盐化超基性岩体。在岩体蚀变过程中,在碱性相对还原的介质条件下,金主要以硫络合物的形式进入成矿溶液,在Ｔ、Ｐ、ＰＨ、Ｅｈ等物理化学参数发生变化的条件下沉淀。     

利用膨润土与工业废渣制轻质保温材料

本文介绍了利用膨润土、钙质造纸废渣制备轻质保温材料的研究,分析了膨润土在轻质保温材料制备中的作用,优选出制备轻质保温材料的配方和工艺。该材料的导热系数为０ ．１７１ Ｗ／ｍ·Ｋ,抗压强度约为９ ．３７ ｋｇ／ｃｍ２ ,容重为０ ．４９ ｇ／ｃｍ３ 。     

基于探针气体吸附等温线的矿物材料表征技术:Ⅱ.多孔材料的孔隙结构

含纳米孔的天然矿物岩石材料的吸附和催化性能对于表生地球化学过程、材料加工、应用及煤炭开发利用等方面均有着重要意义。本文对比分析了各种纳米孔表征技术,重点介绍了基于吸附等温线的纳米孔研究方法。对三个典型样品等温线数据的模型计算表明,应根据材料中孔的形态(平行板状孔、球形孔和圆柱形孔)选择模型,不同类型孔所对应的计算方法和参数有很大差别。表征材料表面能量均匀的样品可首先考虑采用DFT法;HK法一般只作为定性研究方法,BJH方法受样品本身性质参数的影响较小,且计算简单,可广泛应用于介孔材料的孔径分布的表征。     

含液各向异性多孔介质应变局部化分析

工程中的含液多孔介质如饱和或非饱和岩土材料往往具有各向异性特性。采用Rudnicki建立的针对岩土材料的各向异性本构模型,对轴对称压缩试验中的含液多孔介质骨架的各向异性力学行为进行了分析;基于不连续分叉理论,导出了静态非渗流条件下处于轴对称应力状态的含液多孔介质应变局部化发生的临界模量、剪切带方向以及不连续速度矢量的显式表达式,在此基础上计算并讨论了材料参数变化和孔隙液体存在对各向异性多孔介质应变局部化的影响。     

Suction-controlled experiments on Boom clay

The understanding of the thermo-hydro-mechanical behaviour of a clay barrier is needed for the prediction of its final in situ properties after the hydration and thermal transient in a radioactive waste repository.

As part of the CEC 1990–1994 R&D programme on radioactive waste management and storage, the CEA (Fr), CIEMAT (Sp), ENRESA (Sp), SCK · CEN (B), UPC (Sp) and UWCC (UK) have carried out a joint project on unsaturated clay behaviour (Volckaert et al., 1996). The aim of the study is to analyse and model the behaviour of a clay-based engineered barrier during its hydration phase under real repository conditions. The hydro-mechanical and thermo-hydraulic models developed in this project have been coupled to describe stress/strain behaviour, moisture migration and heat transfer. A thermo-hydraulic model has also been coupled to a geochemical code to describe the migration and formation of chemical species.

In this project, suction-controlled experiments have been performed on Boom clay (B), FoCa clay (Fr) and Almeria bentonite (Sp). The aim of these experiments is to test the validity of the interpretive model developed by Alonso and Gens (Alonso et al., 1990), and to build a database of unsaturated clay thermo-hydro-mechanical parameters. Such a database can then be used for validation exercises in which in situ experiments are simulated.

The Boom clay is a moderately swelling clay of Rupellian age. It is studied at the SCK · CEN in Belgium as a potential host rock for a radioactive waste repository. In this paper, suction-controlled experiments carried out on Boom clay by SCK · CEN are described. SCK · CEN has performed experiments to measure the relation between suction, water content and temperature and the relation between suction, stress and deformation. The applied suction-control techniques and experimental setups are detailed. The results of these experiments are discussed in the perspective of the model of Alonso and Gens. The influence of temperature on water uptake was rather small. The measured swelling-collapse behaviour can be explained by the Alonso and Gens model.     

Development and Re‐Evaluation of Tourmaline Reference Materials for In Situ Measurement of Boron δ Values by Secondary Ion Mass Spectrometry

Six tourmaline samples were investigated as potential reference materials (RMs) for boron isotope measurement by secondary ion mass spectrometry (SIMS). The tourmaline samples are chemically homogeneous and cover a compositional range of tourmaline supergroup minerals (primarily Fe, Mg and Li end‐members). Additionally, they have homogeneous boron delta values with intermediate precision values during SIMS analyses of less than 0.6‰ (2s). These samples were compared with four established tourmaline RMs, that is, schorl IAEA‐B‐4 and three Harvard tourmalines (schorl HS#112566, dravite HS#108796 and elbaite HS#98144). They were re‐evaluated for their major element and boron delta values using the same measurement procedure as the new tourmaline samples investigated. A discrepancy of about 1.5‰ in δ¹¹B was found between the previously published reference values for established RMs and the values determined in this study. Significant instrumental mass fractionation (IMF) of up to 8‰ in δ¹¹B was observed for schorl–dravite–elbaite solid solutions during SIMS analysis. Using the new reference values determined in this study, the IMF of the ten tourmaline samples can be modelled by a linear combination of the chemical parameters FeO + MnO, SiO₂ and F. The new tourmaline RMs, together with the four established RMs, extend the boron isotope analysis of tourmaline towards the Mg‐ and Al‐rich compositional range. Consequently, the in situ boron isotope ratio of many natural tourmalines can now be determined with an uncertainty of less than 0.8‰ (2s).     

珠一坳陷始新世文昌组沉积期构造转换对源‒汇体系的控制

An obvious structural transformation between the early and the late stages of the middle Eocene rifting in the ZhuⅠ Depression, which has a significant impact on the formation and evolution of the Paleogene source-to-sink system, has recently been found. Based on comprehensive analysis of seismic, drilling and logging data in the study area, we argue that the structural transformation controls the basic elements of source-to-sink system, such as basin landscape, material source supply, transportation direction and sedimentary style, and affects the deep Paleogene reservoir conditions. Under the restriction of structural transformation, there are two typical source-to-sink models: source migration and fault transformation. Hydrocarbon accumulation related to structural transformation is commonly interpreted by two typical source-to sink models: source migration and fault transformation. The main source of the source migration model migrates under the influence of structural transformation, and the sedimentary boundary, accommodation space and depositional style change accordingly, forming a favorable superimposed and contiguous reservoir target;the supply, transportation and accumulation of provenance in the fault transformation model change orderly in time and space, forming the compound of co-existing fan-delta-beach sedimentary system and reservoir conditions have strong zonation. It is of great significance to explore the characteristics of source to sink system and sand-controlling model under the control of structural transformation in order to find high-quality reservoirs in Paleogene. © 2021, Science Press. All right reserved.     

某些方解石单晶的光学质量评价

本文用光学方法检查了经野外地质工作者挑选过的天然方解石单晶的光学质量。发现部分晶体的光学均匀性很差,晶体中的光散射颗粒很多,不能满足作为光学介质的要求。     

A Common Reference Material for Cadmium Isotope Studies – NIST SRM 3108

Research into natural mass‐dependent stable isotope fractionation of cadmium has rapidly expanded in the past few years. Methodologies are diverse with MC‐ICP‐MS favoured by all but one laboratory, which uses thermal ionisation mass spectrometry (TIMS). To quantify the isotope fractionation and correct for instrumental mass bias, double‐spike techniques, sample‐calibrator bracketing or element doping has been used. However, easy comparison between data sets has been hampered by the multitude of in‐house Cd solutions used as zero‐delta reference in different laboratories. The lack of a suitable isotopic reference material for Cd is detrimental for progress in the long term. We have conducted a comprehensive round‐robin assay of NIST SRM 3108 and the Cd isotope offsets to commonly used in‐house reference materials. Here, we advocate NIST SRM 3108 both as an isotope standard and the isotopic reference point for Cd and encourage its use as ‘zero‐delta’ in future studies. The purity of NIST SRM 3108 was evaluated regarding isobaric and polyatomic molecular interferences, and the levels of Zn, Pd and Sn found were not significant. The isotope ratio ¹¹⁴Cd/¹¹⁰Cd for NIST SRM 3108 lies within ～ 10 ppm Da^?1 of best estimates for the Bulk Silicate Earth and is validated for all measurement technologies currently in use.