利用膨润土与工业废渣制轻质保温材料

本文介绍了利用膨润土、钙质造纸废渣制备轻质保温材料的研究,分析了膨润土在轻质保温材料制备中的作用,优选出制备轻质保温材料的配方和工艺。该材料的导热系数为０ ．１７１ Ｗ／ｍ·Ｋ,抗压强度约为９ ．３７ ｋｇ／ｃｍ２ ,容重为０ ．４９ ｇ／ｃｍ３ 。     

绵阳地区白垩系岩石风化过程的生态效应

论述了四川绵阳地区白垩系七曲寺组砂岩、泥岩风化过程的信息动态及其对森林植被的生态效应，为长江上游水土保持防护林提供开发信息。     

Titanium Isotope Analysis of Igneous Reference Materials using a Double-spike MC-ICP-MS Method

Ti separation was achieved by ion-exchange chromatography using Bio-Rad AG 1-X8 anion-exchange and DGA resins. For high-Fe/Ti and high-Mg/Ti igneous samples, a three-column procedure was required, whereas a two-column procedure was used for low-Fe/Ti and low-Mg/Ti igneous samples. The Ti isotopes were analysed by MC-ICP-MS, and instrumental mass bias was corrected using a 47Ti-49Ti double-spike technique. The 47Ti-49Ti double-spike and SRM 3162a were calibrated using SRM 979-Cr, certificated value 53Cr/52Crtrue = 0.11339. Isobaric interference was evaluated by analysing Alfa-Ti doped with Na, Mg, Ca, and Mo, and results indicate that high concentrations of Na and Mg have no significant effect on Ti isotope analyses; however, Ca and Mo interferences lead to erroneous δ49/47Ti values when Ca/Ti and Mo/Ti ratios exceed 0.01 and 0.1, respectively. Titanium isotopic compositions were determined for 12 igneous reference materials, BCR-2, BHVO-2, GBW07105, AGV-1, AGV-2, W-2, GBW07123, GBW07126, GBW07127, GBW07101, JP-1, and DTS-2b. Samples yield δ49/47Ti (‰) of ?0.035 ± 0.022, ?0.038 ± 0.031, 0.031 ± 0.022, 0.059 ± 0.038, 0.044 ± 0.037, 0.000 ± 0.015, 0.154 ± 0.044, ?0.044 ± 0.018, 0.010 ± 0.022, 0.064 ± 0.043, 0.169 ± 0.034, and ?0.047 ± 0.025 (relative to OL-Ti, ±2SD), respectively; of which isotopic compositions of DTS-2b, JP-1, GBW07101, GBW07105, GBW07123, GBW07126, and GBW07127 are reported for the first time. Standard Alfa-Ti was analysed repeatedly over a ten-month period, indicating a reproducibility of ±0.047 (2SD) for δ49/47Ti, similar to the precisions obtained for geochemical reference materials.     

晶体及矿物颗粒大小对岩土材料力学性质的影响

岩石常见较大的晶体或者矿物颗粒,混凝土中是骨料,通过团簇模拟大颗粒的力学行为、团簇可以破裂。根据设计的相同数量、相同位置、不同半径的大颗粒数值单轴压缩试验,在虚拟试验条件下,考察了颗粒大小对材料力学响应的影响。通过分析颗粒材料的破裂形态、裂纹扩展过程、应力-应变曲线和破裂能量演化规律发现：大颗粒具有明显的增强特性,有阻止裂纹扩展的作用,破裂多绕大颗粒发展;增强幅度随颗粒半径的增加呈单增趋势,半径较小时,增强效果不明显。     

基于地质建造的西南山区成土母质分类方案——以大凉山区为例

为适应生态地质调查和评价工作对成土母质研究的要求,以四川大凉山区为例,提出基于地质建造的成土母质分类方案,即以地质构造演化和地质建造环境为依据,结合残坡积物的成因类型对成土母质进行分类。大凉山区的成土母质可划分为第四纪冲洪积物、新近纪—第四纪砂泥岩类残坡积物、侏罗纪—白垩纪泥质岩类残坡积物、三叠纪砂泥岩类残坡积物、中生代中酸性岩类残坡积物、二叠纪基性—超基性岩类残坡积物、震旦纪—三叠纪砂泥岩类残坡积物、震旦纪—三叠纪碳酸盐岩类残坡积物、元古宙中酸性岩类残坡积物、元古宙火山碎屑岩类残坡积物、元古宙基性—超基性岩类残坡积物、元古宙变质岩类残坡积物等12类。研究表明,大凉山区成土母质和土壤存在差异性,但同一成土母质上的不同土壤类型具有一定相似的地球化学特征,不同成土母质形成的同一种土壤类型存在较大的地球化学差异。因此,基于地质建造的成土母质分类方案既能有效反映不同构造背景和成岩环境下的成土母质差异,又能有效表征成土母质与其上土壤的内在联系。     

四川九寨黄龙机场高填方地基变形三维动力分析

四川九寨黄龙机场具有高填方、高地震烈度、高海拔等三高的特点,高填方体地基在地震作用下的动力稳定与变形问题成为该机场需着重考虑的主要工程地质问题之一。在对目前各种动力分析方法研究的基础上,选用快速拉格郎日差分分析(FLAC)程序,对该机场元山子沟段高填方地基在地震作用下的变形规律进行了系统地研究,获得了一些有实际意义的认识。     

A FINITE ELEMENT DOUBLE POROSITY MODEL FOR HETEROGENEOUS DEFORMABLE POROUS MEDIA

The mathematical base of the double porosity concept, consisting of the continuity and equilibrium equation respectively, is briefly reviewed. A quasi-steady-state transfer function, the so-called leakage term, is used. Important aspects of the developed code, based on the double porosity theory, are presented together with two hypothetical example problems. The resulting trend of the settlements are compared to those from previous work and was found to be significantly different. However, the implications are that the present study exhibits a more realistic prediction for the settlement.     

红层软岩边坡生态防护技术探讨

红层软岩边坡,土质贫瘠,浅层稳定性差,生态防护失效的现象比较突出。为提高西部红层软岩边坡生态防护的可靠性,在对西部红层软岩地区铁路、公路边坡生态防护状况进行调研和分析的基础上,总结红层软岩边坡生态防护失败的原因,吸取经验教训,提出适于红层软岩边坡的生态防护方法和适合该区栽植的草木品种及配置方法。     

Estimation and prediction of plastic waste annual input into the sea from China

Marine plastic debris has been a pervasive issue since the last century, and research on its sources and fates plays a vital role in the establishment of mitigation measures. However, data on the quantity of plastic waste that enters the sea on a certain timescale remain largely unavailable in China. Here, we established a model using material flow analysis method based on life cycle assessment to follow plastic product from primary plastic to plastic waste with statistical data and monitoring data from accurate sources. This model can be used to estimate and forecast the annual input of plastic waste into the sea from China until 2020. In 2011, 0.547 3–0.751 5 million tons of plastic waste entered the seas in China, with a growth rate of 4.55% per year until 2017. And the amount will decrease to0.257 1 to 0.353 1 million tons in 2020 under the influence of governmental management. The amount of plastic waste discharged from coastal areas calculated in this study was much larger than that from river, thus it is suggested to strengthen the governance and control of plastic waste in coastal fishery activities in China in order to reduce the amount of marine plastic waste input.