CHARACTERISTICS OF TECTONIC STRESS FIELD OF THE XIAOWAN RESERVOIR BEFORE AND AFTER THE IMPOUNDMENT

Using the seismic waveform data of Xiaowan seismic network and Yunnan seismic network, we determined the focal mechanisms of 36 earthquakes(M_L ≥ 3.0)from Jun. 2005 to Dec. 2008 and 51 earthquakes(M_L ≥ 2.5)from Jan. 2009 to Dec. 2015 by generalized polarity and amplitude technique. We inverted tectonic stress field of the Xiaowan reservoir before impounding, using the focal mechanisms of 36 earthquakes(M_L ≥ 3.0)from Jun. 2005 to Dec. 2008 and CAP solutions of 58 earthquakes(M_L ≥ 4.0)collected and the solutions in the Global Centroid Moment Tensor(GCMT)catalog; We inverted local stress field of the reservoir-triggered earthquake clustering area, using 51 earthquakes(M_L ≥ 2.5)from Jan. 2009 to Dec. 2015. Focal mechanisms statistics show that, the Weixi-Qiaohou Fault is the seismic fault. Focal mechanisms were strike-slip type in initial stage, but normal fault type in later stage. Focal depths statistics of 51 earthquakes(M_L ≥ 2.5)show that, the average value of focal depths in period Ⅰ, period Ⅱ and period Ⅲ are 8.2km, 7.3km and 7.8km respectively and the standard deviations are 4.3km, 3.5km and 6.0km respectively. The average value of focal depths is basically stable in different period, only the standard deviation is slightly different. Therefore, there is not positive connection between focal depth and deviation of focal mechanisms. What's more, there are 2 earthquakes(number 46 and number 47 in Fig.5 and Table 3)with almost the same magnitude, epicenter and focal depth, but they have different faulting types as normal and strike-slip. The focal mechanism of event No.46 is strike:302°, dip:40° and rake:-97° for plane Ⅰ, however, the focal mechanism of event No.47 is strike:292°, dip:82° and rake:140° for plane Ⅰ. Likewise, earthquake of number 3 and number 18 have similar characteristic. Therefore, the obvious focal mechanism difference of similar earthquake pair indicates the complexity of Weixi-Qiaohou Fault. Considering the quiet-active character of reservoir-triggered earthquakes, we discussed the change of local stress field in different period. The σ₁ of tectonic stress field was in the near-south direction, with a dip angle of 14° before the impoundment, however, the direction of σ₁ of local stress field changed continuously, with the dip angle getting larger after the impoundment. The direction of σ₁ of local stress field of reservoir-triggered earthquake clustering area is close to the strike of Weixi-Qiaohou Fault, and reservoir impoundment increased the shear stress in the fault, so the weakening of fault was beneficial to trigger earthquakes. Comprehensive analysis suggests that fluid permeation and pore pressure diffusion caused by the water impounding, and the weakening of fault caused by local stress field are the key factors to trigger earthquake in the Xiaowan reservoir.     

Influence of single flaw on the failure process and energy mechanics of rock-like material

This paper investigates the influence of a flaw on crack initiation, the failure mode, deformation field and energy mechanism of the rock-like material under uniaxial compression. The results of laboratory test and numerical simulation demonstrate the flaw inclination effect can be classified into three groups: 0–30°, 30–60° and 75–90°. The characteristic stresses increase as the flaw angle increases. The tensile cracks initiate from gentle flaws (α ⩽ 30°) and shear cracks appear at tips of steep flaws (α ⩾ 45°). The input energy, strain energy and dissipation energy of a specimen show approximate increasing trends as the flaw angle increases.     

秦岭—大别东段应力状态研究

本文首先通过Snoke发展的利用P波、 SV波和SH波的初动和振幅比方法计算秦岭—大别东段2008年以来83次M_L≥2.5地震的震源机制解, 然后通过FMSI方法反演得到平均应力场的方向特征: 近东西向的水平挤压和近南北向的水平拉张作用, 与参数统计结果一致; 进而通过震源机制的一致性参数分析应力场方向的变化信息。 分析表明震源机制解呈现了由变化紊乱、 偏离平均应力场到变化一致、 趋于平均应力场再到变化紊乱、 偏离平均应力场的变化过程, 在显著地震前, 研究区整体的震源机制一致性参数处于持续低值状态; 计算了2008年以来93次M_L≥2.5地震的视应力, 拟合视应力与震级的关系, 分析扣除震级影响的差视应力随时间变化特征, 近似反映研究区应力大小的变化。 分析表明显著地震前研究区的差视应力值呈现出明显的先上升后下降的变化过程, 在下降过程中发生地震; 最后利用震源机制一致性参数和差视应力综合分析研究区的应力状态, 均表明显著地震前震源区的构造应力场增强。 目前研究区的震源机制一致性参数较高、 差视应力较低, 研究区的应力水平较低。     

2017-08-09新疆精河Ms6.6地震附近区域相对应变的变化分析

2017年精河M_S6.6地震震前,尼勒克、巴伦台和小泉沟台钻孔应变仪记录到显著的应变变化,经现场落实确认,异常是可靠的。根据这3个台的记录资料计算相对应变的变化,结果表明,地震前最大（小）主应变大小和方向分别出现明显加速和急剧偏转变化。此外还发现,相对应变场异常期间主方向与震源机制解P轴方位较为一致。     

降雨过程中边坡临界滑动场

降雨入渗过程中孔隙水压力的升高与基质吸力的降低引起边坡稳定性的下降,是导致边坡滑塌的主要诱导因素。利用饱和-非饱和渗流有限元计算得到的孔隙水压力场,基于Fredlund提出的非饱和土抗剪强度理论,对边坡临界滑动场进行改进,提出可以考虑降雨过程的边坡临界滑动场数值模拟方法,能够方便、快速地计算出边坡局部、整体安全系数和相对应的临界滑动面在降雨过程中的变化历程。将该法用于一个典型均质边坡和一个非均质边坡在降雨过程中的稳定性计算,分析降雨持续时间、降雨强度和非饱和强度参数取值等因素对边坡稳定性的影响,并将计算结果与其他方法进行比较,结果表明临界滑动场方法能搜索任意形状最危险滑面,计算的安全系数合理。     

利用AMDAR数据分析厦门、泉州双雷达三维风场反演误差

利用2016年全年进出厦门机场和晋江机场航班的AMDAR(Aircraft Meteorological DAta Relay)数据对双雷达反演风场进行检验,分析了厦门、泉州双雷达风场反演的总体误差,研究结果表明:1)验证了双雷达连线附近区域反演风场的平均绝对误差较大,发现了与两部雷达连线的夹角小于15°和大于165°的区域的反演结果的平均绝对误差明显大于误差的年平均值。2)对于反演风向而言,误差随着高度增加而减小。对于反演风速而言,高度在9 km以下的反演误差在5 m/s左右,而9 km以上的反演误差较小。3)剔除了双雷达连线附近区域(与两部雷达连线的夹角小于15°和大于165°的区域)和反射率因子小于5 dBZ以及等于100 dBZ(剔除非气象回波)的反演结果后,双雷达反演风场误差较小,相对于AMDAR数据的风向年平均绝对误差为29.4°,风速年平均绝对误差为3.28 m/s,总体误差在可接受范围之内,反演结果接近"真值",该反演方法稳定可靠。     

中国农业气象模式(CAMM1.0)构建与应用

为发展适宜中国区域农业种植特点的农业气象模式,基于国外作物生长模拟方法,通过模式机理过程改进或重构以及应用方式革新,建立了中国农业气象模式（Chinese AgroMeteorological Model version 1.0,CAMM1.0）。CAMM1.0利用平均温度和土壤水分改进了作物发育进程模式,利用土壤水分改进了作物叶片光合作用、干物质分配和叶面积扩展过程模式,通过蒸发比法扩展了作物蒸散过程模式;自主建立了基于发育进程的冬小麦株高、基于遥感信息的作物灌溉、遥感数据同化、作物长势与灾害评价等模式。基于互联网技术构造了实时运转平台,主要功能包括作物生长过程实时常规模拟与用户个性化定制模拟。CAMM1.0的部分子模式采用多种方法构造,便于多模式集成。CAMM1.0对作物发育进程、光合过程、株高的模拟效果较好,但对土壤水分变化过程的拟合略差,模拟产量略偏低。CAMM1.0评价淮河流域夏玉米年际干旱减弱而涝渍增加的趋势与实际基本相符。     

江西相山铀矿田如意亭剖面火山岩的年代学格架及其地质意义

江西相山铀矿田如意亭剖面最底部的熔结凝灰岩代表了相山火山-侵入活动的开始时间,本文首次报导了该熔结凝灰岩的LA-ICP-MS锆石U-Pb定年结果,得出其形成年龄为137.3±0.9Ma,表明相山火山-侵入活动开始于早白垩世。此外,对如意亭剖面的两个流纹英安岩样品的锆石U-Pb定年结果分别是136.8±2.5Ma和136.4±1.5Ma,对采自如意亭剖面的流纹英安斑岩的锆石U-Pb定年结果是135.0±2.0Ma,对采自如意亭剖面的碎斑熔岩的定年结果是134.1±1.6Ma,这些定年结果结合前人已有的研究,得出相山火山-侵入杂岩的形成时代集中在135Ma左右（137~132Ma）,再次证实了相山火山-侵入活动始于早白垩世,是一次集中且短暂的火山-侵入活动。本文对如意亭剖面的定年结果证实相山地区打鼓顶组和鹅湖岭组的火山岩地层应属于早白垩世。然而赣杭构造带上原先所划分的打鼓顶组与鹅湖岭组火山岩形成的时间与武夷山北坡冷水坑盆地中火山岩系并不相同,因此,打鼓顶组与鹅湖岭组地层在区域上应予重新厘定。     

Predicting reach‐specific properties of fluvial terraces to guide future fieldwork. A case study for the Late Quaternary River Allier (France) with the FLUVER2 model

Numerical models have not yet systematically been used to predict properties of fluvial terrace records in order to guide fieldwork and sampling. This paper explores the potential of the longitudinal profile model FLUVER2 to predict testable field properties of the relatively well‐studied, Late Quaternary Allier system in France. For the Allier terraces an overlapping ¹⁴C and U‐series chronology as well as a record of ¹⁰Be erosion rates exist. The FLUVER2 modelling exercise is focused on the last 50 ka of the upper Allier reach because for this location and period the constraints of the available dating techniques are tightest. A systematic calibration based on terrace occurrence and thicknesses was done using three internal parameters related to (1) the sediment erodibility; (2) the sediment transport distance; and (3) the sediment supply derived from the surrounding landscape. As external model inputs, the best available, reconstructed, tectonic, climatic and base‐level data were used. Calibrated model outputs demonstrate a plausible match with the existing fluvial record. Validation of model output was done by comparing the modelled and measured timing of aggradation and incision phases for the three locations. The modelled range of landscape erosion rates showed a reasonably good match with existing erosion rate estimates derived from ¹⁰Be measurements of fluvial sands. The quasi‐validated model simulation was subsequently used to make new testable predictions about the timing and location of aggradation and erosion phases for three locations along the Allier river. The validated simulations predict that along the Allier, reach‐specific dynamics of incision and aggradation, related to the variations in sediment supply by major tributaries, cause relevant differences in the local fluvial terrace stratigraphy. Copyright © 2016 John Wiley & Sons, Ltd.     

空间移动信息服务客户端实现

介绍了LBS及其相关技术--定位技术、GIS技术和互联网技术,并从开发平台出发比较了当前的几种LBS解决方案。针对空间信息服务的内容和特点,从系统的关键性技术出发,分析了客户端解决方案的数据模型和功能模型,最后介绍了系统实现的情况。