基于圆柱多段拟合的隧道中轴线提取方法研究

提出基于圆柱多段拟合的隧道中轴线提取方法。首先对隧道点云数据进行预处理,并将点云按隧道走向分成不同区段;然后对各区段依据轴线与表面点云法线垂直关系,提取精度较低的中轴线;最后对各区段利用圆柱多段拟合,提取精度较高的中轴线。实验表明,隧道中轴线的提取在一定的采样区间具有较高的稳定性,对直线和弯曲的圆形隧道有良好的适用性,算法可靠,精度较高。     

1.5 μm波长n-p-n型InGaAsP-InP晶体管激光器材料外延生长

基于器件模拟仿真,设计了一种1.5 μm波长InGaAsP-InP晶体管激光器材料外延结构. 其多量子阱有源区置于基区非对称波导中. 仿真结果显示该外延结构能够获得较好的光场限制和侧向电流限制. 对该材料MOCVD生长研究表明,基极重掺杂接触层中Zn²⁺扩散将导致量子阱严重退化. 通过对其扩散过程的模拟仿真,采用平均掺杂浓度为1×10¹⁸ cm^-3的梯度掺杂,有效地抑制了Zn²⁺向量子阱区的扩散. 所获得的外延材料在     

低扩散系数对Pd77 Cu6 Si17合金易非晶化的影响

采用激光熔凝技术,研究了Pd₇₇Cu₆Si₁₇合金快速凝固组织的演变规律.研究表明:随着生长速度的增大,Pd₇₇Cu₆Si₁₇合金晶体生长组织形貌发生了Pd₃Si枝晶+共晶-ξ枝晶+共晶-共晶团簇-规则共晶-非晶的转变;共晶失稳即非晶形成的临界生长速度为6 mm/s,最小层片间距为35 nm.通过与Al-25 wt%Sm,Al-32.7 w     

Nd:YAG纳秒激光诱导硅表面微结构的演化

利用Nd:YAG纳秒激光(波长为532和355 nm)对单晶硅在真空中进行了累积脉冲辐照,研究了表面微结构的演化情况.在激光辐照的初始阶段,532和355 nm激光脉冲均在硅表面诱导出了波纹结构,后者辐照硅表面后形成了近似同心但稍显混乱的环形波纹结构.随着脉冲数的增加,波纹结构逐渐演化为一种类似珠形的凹凸结构,最后形成准规则排列的微米量级锥形结构,该微结构的生长依赖于表面张力波和结构自组织.分析发现,形成的交叉环形结构主要是在355 nm激光辐照硅的过程中,表面张力波导致波纹结构部分叠加的结果.     

Extension of high-order harmonics and generation of an isolated attosecond pulse in the chirped laser field

This paper theoretically investigates the high-order harmonic generation cutoff extension using intense few-cycle linearly chirped laser pulses. It shows that the cutoff of the harmonic can be extended remarkably by optimising the chirping parameters. The time-frequency characteristics of high-order harmonics with different chirping parameters are analysed by means of wavelet transform of the dipole acceleration. It also gives out the classical three-step model pictures of electron. By superposing a properly selected range of the harmonic spectrum, it obtains an isolated 65as pulse.     

Active manipulation of the selective alignment by two laser pulses

This paper solves numerically the full time-dependent Schrõdinger equation based on the rigid rotor model, and proposes a novel strategy to determine the optimal time delay of the two laser pulses to manipulate the molecular selective alignment. The results illustrate that the molecular alignment generated by the first pulse can be suppressed or enhanced selectively, the relative populations of even and odd rotational states in the final rotational wave packet can be manipulated selectively by precisely inserting the peak of the second laser pulse at the time when the slope for the alignment parameter by the first laser locates a local maximum for the even rotational states and a local minimum for the odds, and vice versa. The selective alignment can be further optimised by selecting the intensity ratio of the two laser pulses on the condition that the total laser intensity and pulse duration are kept constant.     

Brillouin scattering study on elastic and piezoelectric properties of laser irradiated ZnO single crystals

Brillouin light scattering technique can be successfully used to determine the whole set of elastic and piezoelectric constants of a ZnO single crystal irradiated by different laser energy densities, into a micron range (radiation layer thickness). It is found that the scattering intensity, the linewidth and the Brillouin scattering shift of acoustic phonons are all strongly dependent on laser energy density. Based on the sound propagation equations and these results, the directional dependences of the compressional and shear moduli of the irradiated ZnO sample in the (001) plane are investigated. It is found that under an appropriate laser condition, 248 nm KrF excimer laser irradiation can significantly improve the surface quality and increase the elastic properties of ZnO single crystal. This procedure has potential applications in the fabrication of ZnO-based surface acoustic wave and optic-electronic devices.     

Control of high-order harmonic generation with two-colour laser field

We numerically investigate the high-order harmonic generation with two-colour optical field, taking into consideration the propagation effects. Some harmonics can be dramatically enhanced at a certain delay between the fundamental pulse and its second harmonics. Choice of the enhanced harmonics can be realised by changing the time delay between the two laser pulses.     

60年距离测量的演变

新中国成立60年来,距离测量方法所发生的巨大变化是,20世纪50年代末期,光速测距仪和微波测距仪的推广应用,开创了"量距不用尺"的新时代;20世纪60年代中期,测地型激光测距仪的快速发展,将光波测距推向了高精度远测程的新境界;几乎与此同时,卫星激光测距和甚长基线射电干涉测量技术的测地实用化,使得测地工作者能够测量远达数千千米的站间距离;20世纪80年代初期,GPS卫星测量技术的问世,使得测地工作者步入了快速高效"量距不见站"的新天地。距离测量的这种演变,也是测绘科学技术进步的一大缩影。     

基于LabwindowsCVI的外腔半导体激光器数字稳频系统设计

为抑制外腔半导体激光器频率漂移,提高频率稳定性,提出一种数字稳频方法。该方法采用数据采集卡,基于LabwindowsCVI语言实现数字锁相放大模块获得稳频误差信号,通过此信号控制压电陶瓷电压,将852 nm外腔半导体激光器的频率锁在铯原子谱线上,实现20 s频率稳定度8.7×10-11。该数字稳频方法降低了人力成本,易升级和修改,具有移植性好和用户界面友好等优点。