贵州省大方县五凤井田水文地质特征初探

五风井田位于贵州省大方县城东侧,面积89.22km^2,含煤地层为二叠系上统龙潭组,主要可采煤层为6中、26、33号煤层,煤炭总资源量26 130万t。井田内主要含水层为三叠系茅草铺组岩溶溶洞含水层（T1m）,夜郎组玉龙山灰岩岩溶裂隙含水层T1y2）,二叠系中统长兴组岩溶裂隙含水层（P3c）、茅口组岩溶溶洞-暗河含水层（P2m）。矿床属于以岩溶充水为主,水文地质条件中等的矿床。井田的充水水源为地表水、地下水和小煤矿、采空区的老窑积水,充水通道为断裂破碎带及采矿冒落裂隙带。     

山西天池煤矿构造特征及其形成机制

基于天池煤矿地质勘探资料,结合区域构造背景研究了矿井地质构造特征及形成机制。天池煤矿构造属简单构造,地层总体呈走向北东、倾向北西的单斜构造,矿井内褶皱发育程度较低,断层以正断层为主,其次为低角度逆掩断层。陷落柱分布较为杂乱,成群出现,常见于褶皱轴部。自三叠纪末期开始一直受到区域构造活动的控制作用,印支期受SN向的挤压,形成了一些近EW向的构造;燕山期经历两期NWW--SEE向挤压使井田内地层及煤层主体呈NE走向;喜山早期的NE—SW向挤压,导致NE向断层的性质发生转变;上新世开始表现为区域上的伸展作用。     

北京及邻区微震活动的初步分析

通过对北京遥测地震台网近年来记录到的北京及邻区地震的震中分布,地震活动频度及能量释放强度的分析,得到本区地震活动在时间分布上具有“聚堆性”。在年发震频度,地震强度和能释放方面均具有双峰值特征,并且具有较好的一致性和同步性,在空间分布上具有条带特征,且形成北东～南西和北西～南东的两条相互交汇的条带。又通过统计分析得到本区发震概率最大的时间段是每年的１０月前后,而地震主要发生在北西～南东带上。     

矿产预测中成矿信息的提取和强化

成矿信息的提取是矿产预测的重要手段,其方法的有效性直接影响到预测成果的可靠性。在成矿规律研究的基础上,有意识地干预模型的构成,突出与成矿有关的信息;抑制某些成矿意义不明显和属干扰的信息,有目的地使模型向反映成矿信息的方向逼近,提高模型与矿床实际赋存地质环境的吻合程度,均是成矿信息提取和强化的内涵。本文从研究实践中总结了先验约束模型和非先验约束模型的强化方法,在新疆阿勒泰地区的地质－找矿工作中已取得     

内蒙古正镶白旗碎斑熔岩岩石学特征及其岩相划分

白旗碎斑熔岩为不规则穹状体,可分为边缘玻质碎斑熔岩、过渡霏细碎斑熔岩、中心粒状碎斑熔岩和根部花岗斑岩四个岩性带。从玻质碎斑熔岩到粒状碎斑熔岩,斑晶碎裂度逐渐减弱,珠边结构在粒状碎斑熔岩中最发育,根部花岗斑岩与正常次火山岩相近。碎斑熔岩中钾长石有序度低,指示了岩石高温成因特征。白旌碎斑熔岩属太平洋岩系钙碱质系列,原始岩浆由来源于上地幔和下地壳熔体的混熔作用形成。     

FS方法及其在综合多项震兆中的应用

本文提出了一种模式识别方法--FS方法.该方法的特征取为某些论域上的模糊子集.先以每三个原始特征组成子分类器的特征集,“训练”这些分类器,然后对子分类器进行筛选,最后用筛选出的子分类器的“软”分类结果的加权平均作为判别函数,形成总的分类决策.将FS方法应用于综合多项震兆,并进行了一系列控制试验,还与地震学中几种常用的方法进行了对比试验.结果表明,FS方法是稳定和有效的.     

DDT residue in soil and water in and around the abounded area of DDT manufacturing factory

Due to the persistent nature of DDT, a persistent organic pollutant and its adverse environmental and health impacts, the present study was undertaken to examine the residual DDT in and around DDT manufacturing factory in Amman Gharh, Nowshera, NWFP. The factory was established in 1963 and remained in operation till 1994. Composite samples of soil, sediments and water were collected in and around the factory area, nearby DDT stores, main factory drain leading to river and nearby villages. Standard procedures were used for the collection, transportation and storage of samples for analysis. Physical parameters for the collected water samples measured were temperature, pH and conductance. Extraction of each sample for DDT analyses was carried out in triplicates using soxhlet extraction apparatus. The extract was transferred to well washed, clean; dry glass vial, sealed and put in the refrigerator. Gas Chromatograph with electron capture detector and capillary column was used for analysis. DDT in the samples was identified on the basis of their retention time and quantified on the basis of peak areas. It is evident from the analytical data obtained in the present study that both water and soil in and around the factory area are still contaminated with DDT, despite the closure of the factory since the past few years.     

Microwave-assisted extraction of organochlorine pesticides from sediments and determination by gas chromatograph with electron capture detection

A simple and rapid procedure to extract organochlorine pesticides （OCPs） from sediments by means of microwave energy is proposed. Sediment samples were irradiated with microwaves in a closed vessel system while immersed in hexane-acetone （1 ： 1, v/v）. The sample extracts were cleaned up using solid phase extraction with Florisil as adsorbent. Pesticides were eluted with hexane-ethyl acetate （80 ： 20, v/v） and determined by gas chromatographic separation with electron capture detection. Three oven programs were assayed with two different solvent mixtures in order to achieve adequate experimental conditions for the complete extraction of organochlorine pesticides from the matrix. Different variables such as the composition of extraction solvent,     

Speciation analysis and significance of ecological geochemistry

Different species of one element have different activities, so it has different effects on environment and human health. To analyze qualitatively and quantitatively the speciation of a special element in sample, which is the important basis for appraising the toxicity and studying the rule of transfer and translation of elements. Since the 1970＇s, the scheme of sequential extraction has already been used at many laboratories both at home and abroard, to get the information about heavy metals＇ activity in polluted soils. Because this method has the experimental nature, many schemes of problem has taken place, the absence of consistency of these sequential extraction have been formed. Thus the complexity of the schemes, the lack of selectivity of reagent, the lack of quality control, the result mainly related to the extraction scheme used, and so on. In the face of these problems, the study of experimental methods of sequential extraction on three different soils, sediment in Dongting Lake, soil in Jiangsu Province and loess in Shanxi Province was made. Reference materials of heavy metal speciation following sequential extraction in soil and sediment had been developed. Nowadays two kinds of sequential extraction methods which are widely used are BCR （three steps） and improved Tessier methods （seven steps）. Based on three steps of BCR, water-soluble speciation and the residual speciation were increased in our research. BCR701 was determined eight times at different laboratories using BCR three steps. The results showed that determined data obtained eight times were identical to the standard value, and it is indicated that this method has good reproducibility. The stability and homogeneity experiments indicated that the preparation of three types of candidates accorded with our requirements. Eight laboratories had afforded the determined values of 12 heavy metal elements （Cu, Pb, Zn, Mn, Co, Ni, Cd, Cr, Mo, As, Sb, Hg, Se et al.） using BCR three steps. Also, these three candidates afforded the determined values by seven steps, and 12 laboratories had participated.     

Assessment of mercury mobility and bioavailability by fractionation method in sediments from coastal zone inundated by the 26 December 2004 tsunami in Thailand

The 26 December 2004 tsunami covered significant portion of a coastal zone with a blanket of potentially contaminated sediments. In this report are presented results on mercury concentrations in sediments deposited by the tsunami in a coastal zone of Thailand. Since the total mercury concentrations are insufficient to assess mercury mobility and bioavailability in sediment, its fractionation was applied. Sediments were sampled within 50 days after the event and analyzed by sequential extraction method. The procedure of sequential extraction involved five subsequent stages performed with solutions of chloroform, deionized water, 0.5 M HCl, 0.2 M NaOH, and aqua regia. The mean concentration of total mercury in sediments was 119 ± 50 ng g⁻¹ dry mass (range 66–230). The fractionation revealed that mercury is mainly bound to the least bioavailable sulphides 75 ± 6% (range 62–86), organomercury compounds 14 ± 7% (range 4–26), and humic matter 9 ± 7% (range 1–27). The lowest contributions bring fractions of water-soluble mercury 0.8 ± 1.0% (range 0.1–3.6) and acid soluble mercury 0.9 ± 0.5% (range 0.2–2.1). Although, the total mercury content is similar in a reference sample and in the tsunami sediments, the highly toxic organomercury fraction contribution is higher in the latter. The results were compared with chemical and sedimentological properties of the sediments but no significant correlations were obtained between them.