长诏断裂带垂直运动与地震关系初探

利用跨断层短水准资料分析了长诏断裂带断层活动特征，结果表明：长诏断裂带总体活动性质基本相同．分时段活动性质有所不同。断层各段多数以压性逆断为主，不同于历史地质考察结果。此外，长诏断裂带各断裂都具有分段活动特点。     

Slumping and shallow faulting related to the presence of salt on the Continental Slope and Rise off North Carolina

Seismic reflection profiles and long- and medium-range sidescan sonar were used to investigate a salt diapir complex and area of slope instability near the base of the Continental Slope off North Carolina. Within the area of investigation three diapirs are bounded on their upslope side by a scarp 60 m high and 50 km long. The slope above the scarp is characterized by a series of shallow rotational normal faults. The bottom below the scarp is furrowed by slide tracks, which were probably carved by large blocks that broke off the scarp face and slid downslope leaving rubble and scree lobes.Extensive slumping in this area appears to be a result of uplift and faulting associated with salt intrusion, which has fractured and oversteepened the slope leading to instability and failure. Sharply defined slide tracks suggest that slope failure above the breached diapir complex is a continuing process, in contrast to much of the surrounding slope area where few instability features were observed.     

右江复合盆地的沉积特征及其构造演化

位于华南褶皱带南缘的右江盆地,其发展可分为两个不同的阶段。它的轮廓和结构,与NW向及NE向同沉积断裂关系密切。盆地内的沉积物,分别由特征不同的非补偿性和补偿性沉积相组成两个双层结构。盆地内火山活动发育,也明显的分为两个阶段。海西期,古特提斯洋的发展使哀牢山洋盆开裂,导致了右江地区在拉张应力条件下出现若干NW向裂陷带,这时的盆地具有大陆边缘裂谷特点。东吴运动后开始的印支期,区域应力条件发生变化。滨大平洋构造的发生,使盆地轮廓和结构发生明显变化,与此同时开始的哀牢山洋盆向NE方向的俯冲消减作用,使盆地在新的挤压条件下再次发生张裂和拗陷。进入了弧后盆地发展阶段。印支期末,盆地封闭。     

首都圈地区现今断层活动的数学模拟及地震危险性讨论

以首都圈地区现今活动断层上近２０年的位移测量资料为依据，用二维线弹性有限元对该区断层的活动特征进行了拟合，并结合有关资料讨论了该区的地震危险性。结果表明：１９７７－１９８６年间该区主压应力优势方位与华北较一致，约为Ｎ４５°－８０°Ｅ；１９８６－１９９０年其主压应力方向向北偏转，约为Ｎ５°－６０°Ｅ；１９９０年至现在其主压应力又向东偏转，角度大于第一阶段，约为Ｎ８０°－９５°Ｅ。该区的张家口－延庆一带近期有发生中强震的可能；丰镇－阳高－大同地区和凉城－古营盘地区应力较高，也应引起注意。     

南沙群岛珊瑚礁地貌图像信息管理系统

运用面向对象的软件开发技术,结合珊瑚礁地貌学、计算机图像学和计算机信息管理技术,在Windows平台上研制开发出南沙群岛珊瑚礁地貌图像信息管理系统。该系统集文件管理、数据库管理和图形、图像管理于一体,具有信息检索输出、信息编辑和信息维护等功能,以图形用户介面交互,达到"所见即所得"的效果。     

南海地形、底质特征与鱼类配布的研究

讨论了南海海区的地理位置、地形地貌以及底质的特征,从而了解了南海渔业资源的特点;认识到南海渔业区的划分是与地形地貌、底质特点相互呼应;由此更好地对南海鱼类在该海域的生活习性以及它们的分布进行研究.     

东亚岛弧地形横剖面与板块运动

通过对东亚岛弧横剖面形态的系统分析，并结合弧前的构造应力的分析，作者认为，东亚岛弧形成于板块东移的构造环境中，横剖面形态存在两种基本类型即内缓外陡型和内陡外缓型，这两种不同的横剖面具有不同的弧前应力，前者表现弧前挤压，后者表现弧前引张，这反映地貌形态与构造应力之间的密切关系。     

Tectonics of a fast spreading center: A Deep-Tow and sea beam survey on the East Pacific rise at 19°30′ S

Sea Beam and Deep-Tow were used in a tectonic investigation of the fast-spreading (151 mm yr^-1) East Pacific Rise (EPR) at 19°30 S. Detailed surveys were conducted at the EPR axis and at the Brunhes/Matuyama magnetic reversal boundary, while four long traverses (the longest 96 km) surveyed the rise flanks. Faulting accounts for the vast majority of the relief. Both inward and outward facing fault scarps appear in almost equal numbers, and they form the horsts and grabens which compose the abyssal hills. This mechanism for abyssal hill formation differs from that observed at slow and intermediate spreading rates where abyssal hills are formed by back-tilted inward facing normal faults or by volcanic bow-forms. At 19°30 S, systematic back tilting of fault blocks is not observed, and volcanic constructional relief is a short wavelength signal (less than a few hundred meters) superimposed upon the dominant faulted structure (wavelength 2–8 km). Active faulting is confined to within approximately 5–8 km of the rise axis. In terms of frequency, more faulting occurs at fast spreading rates than at slow. The half extension rate due to faulting is 4.1 mm yr^-1 at 19°30 S versus 1.6 mm yr^-1 in the FAMOUS area on the Mid-Atlantic Ridge (MAR). Both spreading and horizontal extension are asymmetric at 19°30 S, and both are greater on the east flank of the rise axis. The fault density observed at 19°30 S is not constant, and zones with very high fault density follow zones with very little faulting. Three mechanisms are proposed which might account for these observations. In the first, faults are buried episodically by massive eruptions which flow more than 5–8 km from the spreading axis, beyond the outer boundary of the active fault zone. This is the least favored mechanism as there is no evidence that lavas which flow that far off axis are sufficiently thick to bury 50–150 m high fault scarps. In the second mechanism, the rate of faulting is reduced during major episodes of volcanism due to changes in the near axis thermal structure associated with swelling of the axial magma chamber. Thus the variation in fault spacing is caused by alternate episodes of faulting and volcanism. In the third mechanism, the rate of faulting may be constant (down to a time scale of decades), but the locus of faulting shifts relative to the axis. A master fault forms near the axis and takes up most of the strain release until the fault or fault set is transported into lithosphere which is sufficiently thick so that the faults become locked. At this point, the locus of faulting shifts to the thinnest, weakest lithosphere near the axis, and the cycle repeats.     

顾及地貌特征的矿区地表塌陷DEM的生成方法

地下煤炭资源开采导致矿区地表塌陷和矿区地形的变化,直接由开采沉陷下沉预计数据生成的DEM不能表现矿区地表塌陷后的地形状况。通过在开采沉陷下沉预计程序中增加高程修正计算功能,对矿区原始地貌高程进行下沉修正计算,生成矿区地表塌陷高程数据文件,由该数据文件可以生成顾及地貌特征的矿区地表塌陷DEM。该方法操作和实现简单,生成的DEM精度可靠,能够表现矿区地表塌陷后的地形状况,可以作为矿区地理信息系统的基础数据,对于指导开采沉陷的防治和治理具有重要意义。