The Meso-Cenozoic thermo-tectonic evolution of the Eastern Pyrenees: an <Superscript>40</Superscript>Ar/<Superscript>39</Superscript>Ar fission track and (U–Th)/He thermochronological study of the Canigou and Mont-Louis massifs

Vertical displacements on the SW–NE Têt fault (Eastern Pyrenees Axial Zone, France), which separates the Variscan Canigou-Carança and Mont-Louis massifs, were constrained using a thermochronologic multi-method approach. ⁴⁰Ar/³⁹Ar data from the granitic Mont-Louis massif record its Variscan cooling history and reveal no ages younger than Early Cretaceous, while the Canigou-Carança gneiss massif records systematically younger ⁴⁰Ar/³⁹Ar ages. These younger ⁴⁰Ar/³⁹Ar ages in the Canigou-Carança gneiss massif are the result of partial to total rejuvenation of argon isotopic systems related to a thermal flow coeval with the Cretaceous HT-BP metamorphism in the North Pyrenean Zone. Only the deepest rocks from the Canigou-Carança suffered this extensive Mid-Cretaceous thermal overprint probably due to differential burial around 4 km at that time. The post Mid-Cretaceous vertical displacements along the Têt fault are recorded by “low” temperature thermochronology using K-feldspar ⁴⁰Ar/³⁹Ar, zircon and apatite fission track and (U–Th)/He datings. The Mont-Louis granite samples experienced a long period of protracted cooling reflecting a lack of thermo-tectonic activity in this area from Late Palaeozoic to Early Cenozoic, followed by cooling from 55–60 Ma to Late Eocene at a mean rate of 15–20°C/Ma in the final stage. This cooling stage corresponds to Têt fault reactivation with a reversed component, promoting exhumation of the Mont-Louis roof zone contemporaneously with the south-vergent Pyrenean thrusting. In the Canigou-Carança massif, the main cooling event occurred from 32 to 18 Ma at a maximum rate of 30°C/Ma during Early Oligocene followed by a more moderate rate of 3°C/Ma from Late Oligocene to Early Burdigalian, coeval with the normal reactivation of the Têt fault in brittle conditions that accommodated the final exhumation of the massif during the opening of the Gulf of Lion.     

High heat flow anomalies on an old oceanic plate observed seaward of the Japan Trench

Thirty-three new measurements on the seaward slope and outer rise of the Japan Trench along a parallel of 38°45′N revealed the existence of high heat flow anomalies on the subducting Pacific plate, where the seafloor age is about 135 m.y.. The most prominent anomaly with the highest value of 114 mW/m² is associated with a small mound on the outer rise, which was reported to be a kind of mud volcano. On the seaward slope of the trench, heat flow is variable: high (70–90 mW/m²) at some locations and normal for the seafloor age (about 50 mW/m²) at others. The spatial variation of heat flow may be related to development of normal faults and horst/graben structures due to bending of the Pacific plate before subduction, with fluid flow along the fault zones enhancing the vertical heat transfer. Possible heat sources of the high heat flow anomalies are intra-plate volcanism in the last several million years like that discovered recently on the Pacific plate east of the Japan Trench.     

Probabilistic modeling of seismically triggered landslides using Monte Carlo simulations

The 2004 Chuetsu earthquakes of Niigata (Japan) triggered numerous landslides, and the most widespread types of landslides were highly disrupted, relatively shallow slides and soil (debris) flows. This paper presented a method to evaluate slope instability using Newmark displacement on a pixel-by-pixel basis in a given area. The proposed method was able to integrate Newmark displacement modeling and Monte Carlo simulations within geographical information systems. In the modeling, an empirical attenuation relationship was utilized to calculate Arias intensity over this study area, and the variability of geotechnical parameters was taken into account to calculate coseismic landslide displacement. Before deriving the displacement from related inputs, the Monte Carlo simulations ran 1,500 times and generated 1,500 displacement values for each grid cell, and then means and standard deviations of displacement were calculated and probabilistic distributions can be obtained. Finally, given 10 cm as a threshold value of displacement, estimated probabilities of displacement exceeding 10 cm were shown as a map of seismic landslide hazards. The resulting hazard map was classified into four categories from very low to high level.     

鄂尔多斯高原植被生态分区及其水文地质意义

保护生态环境是鄂尔多斯高原地下水可持续开发利用中亟待解决的问题。在查清植被生态群落分布特征的基础上,通过分析植被演替的自然驱动因素,将鄂尔多斯高原的植被生态划分为基岩台地植被生态水文地质区、沙盖基岩植被生态水文地质区、沙地植被生态水文地质区和滩地植被生态水文地质区。结果表明,气象和地形地貌控制着区内植被生态的总体分布格局,包气带和地下水因素控制着植被生态的演替,沙地植被生态和滩地植被生态的生长发育与地下水关系密切,是地下水开发时保护植被生态的靶区。     

基于贡献权重迭加法的滑坡风险区划

贡献权重迭加法是对滑坡本底因子和承灾体因子在滑坡发育中的贡献率进行统计后,通过贡献率均值化、规一化处理,利用权重转换模型计算出每一个因子内部的权重——自权重W和因子相互之间的权重——互权重W＇。将滑坡因子、承灾体因子和两者的自权重、互权重分别相乘迭加,得到滑坡危险度和易损度区划结果,再将2项结果相乘得出滑坡风险区划。     

基于蒙特卡罗法的多级黄土滑坡可靠性分析

滑坡稳定性分析目前工程中一般采用极限平衡算法。为了确定滑坡的稳定性系数,在计算过程中要将岩土体、计算模型简化,忽略一些影响滑坡稳定的次要因素,把影响滑坡稳定的各种主要因素作为确定参数。由于滑坡岩土体本身的非均质性及其参数确定具有随机性和变异性,用唯一的稳定系数不能客观地反映整个滑坡的真实安全程度。以陕西省夏呀河滑坡为例,通过野外详细调查、工程勘探和室内土工试验,初步确定该滑坡存在四级滑动面,难以用简单的单一滑动面计算其稳定性。因此,先采用推力传递系数法对滑坡体上的四级滑坡分别进行滑坡稳定性计算,得到该滑坡体上的四级滑坡稳定系数。再采用蒙特卡罗法对该四级滑坡进行可靠性分析,得到其可靠度,定量地表达夏呀河四级滑坡的安全程度。同时对比分析夏呀河四级滑坡的稳定系数和失稳概率,综合评价该滑坡体上的四级滑坡的稳定性及其风险概率,为滑坡的工程治理及预测预警、灾害危险性评价提供依据。     

陕西小秦岭华阳川韧性剪切带的特征 及其区域构造意义

陕西小秦岭华阳川韧性剪切带发育在新太古界太华群之中,野外调研和显微构造观察结果表明,该韧性剪切带是由构造片岩、眼球状片麻岩组成的深层次韧性剪切带,具有逆冲兼左行走滑的斜冲特征。对韧性剪切带构造片岩黑云母进行^40Ar／^39Ar同位素定年,获得坪年龄为419M&#177;0．6Ma,反等时线年龄为417Ma&#177;0．8Ma。认为华阳川韧性剪切带及其相应的小秦岭区域主导构造变形是发生于419Ma左右的秦岭加里东事件的结果。     

应用探地雷达探测活动断层

在浅覆盖区采用探地雷达探测地震活动断层。通过实验确定出最佳的采集参数和数据处理流程,在雷达剖面上,能够清晰地显示出断层上部的形态特征、上断点埋深和岩土分层。结合钻孔资料,利用雷达剖面上对第四系覆盖的分层结果和上断点所在的层位可以分析和评价断层的活动性。     

分布式光纤传感技术在滑坡监测中的应用

将分布式光纤传感技术引入滑坡监测,既可得到整个滑坡体的概要特征,又能提高监测效率。FBG与BOTDR是两种最具代表性的分布式光纤传感技术,FBG通过测量其反射光波长的变化获得应变或温度值。BOTDR通过测定后向布里渊散射光的频移实现分布式温度、应变测量。FBG传感器灵敏度高,但只能实现离散点的准分布式测量,BOTDR可实现分布式、长距离、不间断测量,但其空间分辨率不高。笔者提出FBG与BOTDR联合监测滑坡的方案。在巫山残联滑坡,在整个滑坡体上铺设监测光纤,利用BOTDR获得整个滑坡体的概要信息;在滑坡体变形的关键部位———变形缝安装FBG传感器,获得某些关键部位的应变信息,从而实现由点到线再到面的监测,获得滑坡体较完整的应变信息。     

单侯井田构造发育规律及其对煤层开采的影响

从区域构造入手,对单侯井田构造进行分析,认为井田内断层发育以走向NW—NE、落差≤5m的小型正断层为主,且主要分布于大中型构造的两侧．特别是在其弧形转折带附近往往形成“羽”状雁列的小断层密集带。断层垂向上多分布于4—7号煤层之间的厚煤层发育区,其严重破坏了煤层的连续及完整性,是影响煤层开采的最主要因素之一。井田褶皱构造相对不发育,以短轴小型背、向斜为主,均属缓波状褶曲,对煤层的开采无影响或影响较小。根据井田地质构造发育程度,对其进行预测及分区评价：井田东部为强烈的构造挤压带,以发育走向NW-近EW—NE向的大型逆掩断层为特点,构造最复杂;井田西北部是相对较轻微的构造挤压带,以发育走向NE向的逆断层为特征,构造较复杂;井田南部以发育近SN或NNW向正断层为主,构造相对简单。评价结果对矿井设计及采区与工作面布置有一定的指导作用。