A Preliminary Analysis of Relations Between Tectonic Deformation of Sedimentary Cover and Basement in Kuqa Depression

Study of seismic activity in the Kuqa area enables us to infer some possible active faults in basement from the epicentral distribution on different profiles. The relations between active faults in the basement and surface structures are analyzed and the difference between sedimentary cover and basement in their deformation characteristics and the genesis are discussed. The following conclusions have been drawn : ( 1 ) the epicentral distribution indicates that, the east Qiulitag and south and north Qiulitag deep faults in the basement correspond to the east and west Qiulitag anticlines, respectively. Moreover, deep faults also exist beneath the Yiqiklik and Yaken anticlines. It indicates that the formation of surface structures is controlled by deep structures; (2) A NE-trending strike-slip fault develops along the line from the western termination of Yiqiklik structure to Dongqiu Well 5 and a NW-trending active fault on the western side of Baicbeng. The two active faults across the tectonic strike are the main causes for tectonic segmentation of the Kuqa depression and possibly the cause for the middle segment (Kuqa-Baicheng) of the depression to be more shortened than both its eastern and western terminations; (3) The difference between the sedimentary cover and basement in their deformation characteristics depends mainly on the different properties of media between them.The lithospheric strength of the basement in the basin is fairly high, which determines the basement deformation to be mainly of brittle fracture seismic activity. While the strength of sedimentary cover is low, where there exist weak thin layers, such as coal and gyps. Under the effect of strong tectonic compression, the sedimentary rocks may undergo strong viscous or plastic flow deformation; meanwhile, an aseismic detachment may take place along the weak layers.     

油气圈闭与鄂尔多斯盆地北部铀成矿关系探讨

鄂尔多斯盆地北部的伊盟隆起区 ,特别是杭锦旗至东胜一带的地层发育大量的圈闭 ,它们是油气聚集成藏的场所。本文剖析了这些圈闭的类型和成因 ,指出它们是盆地北部天然气运移的有利指向区 ,是还原性气体的储存库和重要的扩散源 ;油气渗出和含氧含铀水渗入的交汇部位是铀成矿的有利场所。因此 ,查明圈闭和断裂构造 ,对分析油气运移方向及砂岩型铀矿预测具有实际意义     

议京西大台地区的燕山运动

作者研究了京西大台地区的燕山运动，初步研究表明：这里不存在强烈的挤压变形迹象和显著的角度不整合．缺乏磨拉石建造。龙门组是厚度有限的河流相沉积，九龙山组是具有弱火山活动的湖相一滨湖相沉积。在隆起带和沉降带之间侏罗系地层显著的厚度变化率、大安山一斋堂滑覆构造及其派生的髫髻山断陷盆和大量高角度滑动面理，都显示了伸展构造背景下基底断块的差异升降。髫髻山组与壳幔相互作用有关的一套火山岩显示了上述运动的深部背景。     

山西五台地区系舟山逆冲推覆构造地质特征

系舟山逆冲推覆构造带位于中生代燕山造山带的西南端，分布于系舟山掀斜向斜的北西翼，形成于晚侏罗世晚期，空间上由一系列近平行排列的逆冲断裂组成，剖面上表现为侧幕展布的犁式逆冲断裂所构成的前陡、后缓的单冲式叠瓦状构造。主体由北西向南东方向逆冲．逆冲扩展方式为前展式，运移距离大于5．8km。推覆构造中应力状态在横、纵向上呈现有规律的变化，根带以挤压为主的高角度逆冲断裂及复杂多级褶皱为主；中带以单剪为主，形成叠瓦状构造；锋带挤压作用增强，发育反冲断层和不对称褶皱。随着挤压应力的松弛减弱，山前形成规模较大的正断层。     

基于MAPGIS的钻孔柱状图绘制软件的编制

绘制钻孔地质柱状图是地质工作中的一项重要工作。在计算机没有普及时，主要是通过手工绘制完成的。随着计算机在地质学中的广泛应用，地质工作者就如何利用计算机高效快速地绘制钻孔地质柱状图进行了很多尝试，如使用一些商业绘图软件或编制了一些软件，但往往不尽人意。基于MAPGIS开发一个钻孔柱状图绘制软件，可以方便地读取数据库中的数据进行柱状图绘制，生成图形为MAPGIS文件格式，可以在MAPIS中修改及打印。这里介绍了MAPGIS二次开发平台，并阐述了软件系统设计思路和关键技术的实现方法。     

Sedimentology and kinematics of a large, retrogressive growth-fault system in Upper Carboniferous deltaic sediments, western Ireland

Growth faulting is a common feature of many deltaic environments and is vital in determining local sediment dispersal and accumulation, and hence in controlling the resultant sedimentary facies distribution and architecture. Growth faults occur on a range of scales, from a few centimetres to hundreds of metres, with the largest growth faults frequently being under‐represented in outcrops that are often smaller than the scale of feature under investigation. This paper presents data from the exceptionally large outcrops of the Cliffs of Moher, western Ireland, where a growth‐fault complex affects strata up to 60 m in thickness and extends laterally for ≈ 3 km. Study of this Namurian (Upper Carboniferous) growth‐fault system enables the relationship between growth faulting and sedimentation to be detailed and permits reconstruction of the kinematic history of faulting. Growth faulting was initiated with the onset of sandstone deposition on a succession of silty mudstones that overlie a thin, marine shale. The decollement horizon developed at the top of the marine shale contact for the first nine faults, by which time aggradation in the hangingwall exceeded 60 m in thickness. After this time, failure planes developed at higher stratigraphic levels and were associated with smaller scale faults. The fault complex shows a dominantly landward retrogressive movement, in which only one fault was largely active at any one time. There is no evidence of compressional features at the base of the growth faults, thus suggesting open‐ended slides, and the faults display both disintegrative and non‐disintegrative structure. Thin‐bedded, distal mouth bar facies dominate the hangingwall stratigraphy and, in the final stages of growth‐fault movement, erosion of the crests of rollover structures resulted in the highest strata being restricted to the proximity of the fault. These upper erosion surfaces on the fault scarp developed erosive chutes that were cut parallel to flow and are downlapped by the distal hangingwall strata of younger growth faults.     

The Role of Pre-existing Structures in the Origin, Propagation and Architecture of Faults in the Main Ethiopian Rift

Four major fault systems oriented N–S to NNE–SSW, NE–SW, E–W and NW–SE are identified from Landsat Thematic Mapper (TM) images and a high resolution digital elevation model (DEM) over the Ethiopian Rift Valley and the surrounding plateaus. Most of these faults are the result of Cenozoic - extensional reactivation of pre-existing basement structures. These faults interacted with each other at different geological times under different geodynamic conditions. The Cenozoic interaction under an extensional tectonic regime is the major cause of the actual volcano-tectonic landscape in Ethiopia. The Wonji Fault Belt (WFB), which comprises the N–S to NNE–SSW striking rift floor faults, displays peculiar propagation patterns mainly due to interaction with the other fault systems and the influence of underlying basement structures. The commonly observed patterns are: curvilinear oblique-slip faults forming lip-horsts, sinusoidal faults, intersecting faults and locally splaying faults at their ends. Fault-related open structures such as tail-cracks, releasing bends and extensional relay zones and fault intersections have served as principal eruption sites for monogenetic Plio-Quaternary volcanoes in the Main Ethiopian Rift (MER).     

Active faulting at the Eurasian, North American and Pacific plates junction

The active faults known and inferred in the area where the major Pacific, North American and Eurasian plates come together group into two belts. One of them comprises the faults striking roughly parallel to the Pacific ocean margin. The extreme members of the belt are the longitudinal faults of islands arcs, in its oceanic flank, and the faults along the continental margins of marginal seas, in its continental flank. The available data show that all these faults move with some strike-slip component, which is always right-lateral. We suggest that characteristic right-lateral, either partially or dominantly, kinematics of the fault movements has its source in oblique convergence of the Pacific plate with continental Eurasian and North American plates. The second belt of active faults transverses the extreme northeast Asia as a continental extension of the active mid-Arctic spreading ridge. The two active fault belts do not cross but come close to each other at the northern margin of the Sea of Okhotsk marking thus the point where the Pacific, North American and Eurasian plates meet.     

开滦荆各庄矿FE9'断层研究

通过9煤层、11煤层、12-1煤 层中 工程对 FE9'断层的 揭露 ,并结合 巷探 、钻探 等手段 ,对 FE9'断层 的空 间 展布有了新 的认 识。对 周边 12-2煤层 的规划 开发、断层样 式的 认识乃 至井 田应力 场分 布的研 究提 供了依 据。