城市中小河道水工建（构）筑物调查测绘技术方法的探讨

结合具体工程实例介绍了当前城市中小河道测量工程中常见水工建（构）筑物的类型、调查量测内容及对应精度指标、外业测绘取舍及内业成图表示方法等,特别是根据实地水工建（构）筑物的规模大小、复杂程度,探讨了对其进行调查测绘的技术方法,并结合CAD绘图系统提出了相应的解决办法.     

Evolution of neotectonic activity of East Anatolian Fault System (EAFS) in Bingöl pull-apart basin,based on fractal dimension and morphometric indices

This study is an attempt of a semi-automatic geomorphological GIS analysis based on morphometric indices. In the study, 10-m-resolution Digital Elevation Models (DEMs) are used to assess the neotectonic signals regarding the recent topographic developments and to attach additional significance to active tectonics in the Bingöl basin area. The methodology incorporates the determination of the structural similarities of the faults in the basins using fractal concepts and the application of four morphometric indices (Stream Power Index (SP), Multi-resolution Index of Valley Bottom Flatness (MRVBF), Terrain Ruggedness Index (TRI) and Valley Width-to-Height Ratio (Vf)). In order to detect the deviation from spatial randomness of the applied indices, the weighted correlation coefficient Moran’s I is used and the results are interpreted at a confidence interval of 99%. The spatial distribution of integrated index values is evaluated with the tectonically active fault zones in order to determine the probable activity and the structural deformation in the basin.The applied methodology reveals that the fractal analysis of the fault lines and the spatial analysis of the morphometric indices proved to be effective tools in analyzing the tectonic influence of the fault system on the basin area. Within the basin area, a relatively lesser degree of tectonic activity is observed, in contrast with the high tectonic activity outside the basin.     

Calcium,Na, K and Mg Concentrations in Seawater by Inductively Coupled Plasma‐Atomic Emission Spectrometry: Applications to IAPSO Seawater Reference Material,Hydrothermal Fluids and Synthetic Seawater Solutions

We report a measurement procedure to determine simultaneously the major cation concentrations (Na, Ca, K and Mg) of seawater‐derived solutions by inductively coupled plasma‐atomic emission spectrometry. The best results were obtained when the IAPSO (‘standard’) seawater reference material was diluted by thirty times with Milli‐Q^® water. We obtained an average reference value r_K (the ratio of the mass fraction of potassium to that of chlorine, i.e., (g kg^?1)/(g kg^?1)) for IAPSO seawater of 0.0205 ± 0.0006 (2.9% RSD), not significantly different from 0.0206 ± 0.0005 (2.4% RSD) for seawater composition reported in the literature. The measured Na, Ca and Mg concentrations correspond to r_Na, r_Ca and r_Mg values of 0.5406 ± 0.0026 (0.5% RSD), 0.02192 ± 0.00048 (2.2% RSD) and 0.06830 ± 0.00047 (0.7% RSD), respectively, in line with previous values measured by wet‐chemistry and atomic absorption spectrophotometry or wet‐chemical titration. Our measurement procedure was used successfully on synthetic seawater solutions and high‐temperature hydrothermal fluids.     

Sulfur Concentration in Geochemical Reference Materials by Solution Inductively Coupled Plasma‐Mass Spectrometry

With implications for the origin of ore deposits, redox state of the atmosphere, and effects of volcanic outgassing, understanding the sulfur cycle is vital to our investigation of Earth processes. However, the paucity of sulfur concentration measurements in silicate rocks and the lack of well‐calibrated reference materials with concentrations relevant to the rocks of interest have hindered such investigations. To aid in this endeavour, this study details a new method to determine sulfur concentration via high mass resolution solution inductively coupled plasma‐mass spectrometry (ICP‐MS). The method is based on an aqua regia leach, involving relatively rapid sample preparation and analysis, and uses small test portion masses (< 50 mg). We utilised two independently prepared standard solutions to calibrate the analyses, resulting in 4% accuracy, and applied the method to eight geochemical reference materials. Measurements were reproducible to within ~ 10%. Sulfur concentrations and isotopes of six reference materials were measured additionally by elemental analyser‐combustion‐isotope ratio mass spectrometry to independently evaluate the accuracy of the ICP‐MS method. Reference materials that yielded reproducible measurements identical to published values from other laboratories (JGb‐1, JGb‐2 and MAG‐1) are considered useful materials for the measurement of sulfur. Reference materials that varied between studies but were reproducible for a given test portion perhaps suffer from sample heterogeneity and are not recommended as sulfur reference materials.     

Properties of iron alloys under the Earth's core conditions

The Earth's core is constituted of iron and nickel alloyed with lighter elements. In view of their affinity with the metallic phase, their relative high abundance in the solar system and their moderate volatility, a list of potential light elements have been established, including sulfur, silicon and oxygen. We will review the effects of these elements on different aspects of Fe–X high pressure phase diagrams under Earth's core conditions, such as melting temperature depression, solid–liquid partitioning during crystallization, and crystalline structure of the solid phases. Once extrapolated to the inner–outer core boundary, these petrological properties can be used to constrain the Earth's core properties.     

Precise and Accurate In Situ Determination of Lead Isotope Ratios in NIST,USGS, MPI‐DING and CGSG Glass Reference Materials using Femtosecond Laser Ablation MC‐ICP‐MS

Lead isotope ratio data were obtained with good precision and accuracy using a 266 nm femtosecond laser ablation (fLA) system connected to a multi‐collector ICP‐MS (MC‐ICP‐MS) and through careful control of analytical procedures. The mass fractionation coefficient induced by 266 nm femtosecond laser ablation was approximately 28% lower than that by 193 nm excimer laser ablation (eLA) with helium carrier gas. The exponential law correction method for Tl normalisation with optimum adjusted Tl ratio was utilised to obtain Pb isotopic data with good precision and accuracy. The Pb isotopic ratios of the glass reference materials NIST SRM 610, 612, 614; USGS BHVO‐2G, BCR‐2G, GSD‐1G, BIR‐1G; and MPI‐DING GOR132‐G, KL2‐G, T1‐G, StHs60/80‐G, ATHO‐G and ML3B‐G were determined using fLA‐MC‐ICP‐MS. The measured Pb isotopic ratios were in good agreement with the reference or published values within 2s measurement uncertainties. We also present the first high‐precision Pb isotopic data for GSE‐1G, GSC‐1G, GSA‐1G and CGSG‐1, CGSG‐2, CGSG‐4 and CGSG‐5 glass reference materials obtained using the femtosecond laser ablation MC‐ICP‐MS analysis technique.     

成藏期砂岩孔隙度对油气分布的控制作用——以东营凹陷牛庄洼陷沙三中亚段岩性油藏为例

在具有相同储集砂体和相似断层输导情况下,牛庄洼陷沙三中亚段砂岩体油藏长期存在以下难以解释的现象：1）现今砂岩孔隙度分布与油气分布不一致,高孔隙砂岩不含油而低孔隙砂岩含油;2）相同物性砂岩有的含油而有的不含油,含油砂体现今物性接近,但含油级别却存在很大差异。本文从古孔隙度恢复方面分析了牛庄洼陷西部地区沙三中砂岩储层在成藏期的储集条件,并探讨了成藏期储层临界孔隙度。研究发现：1）虽然现今储层物性下限很低,部分砂岩已经致密化,但成藏期的古孔隙度分布在18%～25%范围内,远大于成藏期临界孔隙度13.9%。但由于埋藏过程的差异导致砂岩储层后期减孔幅度不同,因而现今储层物性不能反映成藏期储层物性,成藏期孔隙度高并不能代表现今孔隙度高;2）成藏期高孔隙度带与现今油气分布范围高度一致,表明在相似断层输导条件下,由于储层物性级差优势形成油气优势运移通道,导致高孔隙度带砂体含油,因此,沙三中亚段岩性油藏富集在成藏期高孔隙带中,成藏期砂岩古孔隙度是油气成藏的重要控制因素,而现今砂岩储层高孔隙带在成藏期并不一定高。牛庄洼陷西部地区沙三中亚段储层中具有高古孔隙度的砂岩仍有较大勘探潜力。     

The Moreira Gomes deposit of the Cuiú-Cuiú goldfield: Fluid inclusions and stable isotope constraints and implications for the genesis of granite-hosted gold mineralization in the Tapajós Gold Province,Brazil

Moreira Gomes is a recently discovered deposit (21.7 t Au) of the Cuiú-Cuiú goldfield, Tapajós Gold Province, Amazonian Craton. The mineralized zone is about 1200 m long, 30–50 m wide, and at least 400 m in depth. The zone is controlled by a subvertical, east–west-trending structure that is related to a left lateral strike-slip fault system. The host rocks are predominantly tonalites of the Creporizão Intrusive Suite (1997 ± 2 Ma) of uncertain tectonic setting (magmatic arc or post-collision). Hydrothermal alteration and mineralization are predominantly of the fissure-filling type and locally pervasive. Sericitization, chloritization, sulfidation, silicification, carbonatization and epidotization are the observed alteration types. Pyrite is the predominant sulfide mineral and bears inclusions of chalcopyrite, galena, sphalerite and minor hessite and bismuthinite. Gold occurs predominantly as inclusions in pyrite and subordinately in the free-milling state in quartz veins. Ag, Pb and Bi have been detected by semi-quantitative EDS analysis.Three types of fluid inclusions, hosted in quartz veins and veinlets, have been identified. (1) one- and two-phase CO₂ inclusions; (2) two- and three-phase H₂O–CO₂-salt inclusions, and (3) two-phase H₂O-salt inclusions. The CO₂-bearing types are interpreted as the product of phase separation of an immiscible fluid. This fluid presents low to moderate density, low to moderate salinity (1.6–11.8 wt.% NaCl equivalent) and was trapped at 280° to 350 °C. The chemical system of the aqueous inclusions may contain CaCl₂ and/or MgCl₂, salinity varies from zero to 10.1 wt.% NaCl equivalent. Only locally salinities up to 25% have been recorded. This fluid was trapped between 120° and 220 °C and is interpreted as resulting from mixing of a hotter and more saline aqueous fluid (in part derived from phase separation of the H₂O–CO₂ fluid) with a cooler and dilute aqueous fluid.The δ³⁴S values of pyrite (−0.3‰ to 3.9‰) are probably related to magmatic sulfur. The isotopic composition of inclusion fluids and of the fluid in equilibrium with hydrothermal minerals (quartz, chlorite, and calcite) show δ¹⁸O and δD values that range from +0.5 to +9.8‰, and from −49 to −8‰, respectively. Mineral pairs show equilibrium isotopic temperatures that are compatible with the fluid inclusion homogenization temperatures and with textural relationships of the hydrothermal minerals.Isotopic results combined with mineralogical and fluid inclusion data are interpreted to reflect a magmatic-hydrothermal system that evolved in at least three stages. (1) Exsolution of a CO₂-bearing magmatic fluid between 400 °C and 320–350 °C and up to 2.1 kbar (6 km in depth) followed by phase separation and main precipitation of the hydrothermal assemblage composed of chlorite–sericite–pyrite–quartz-gold. (2) Cooling and continuous exsolution of CO₂ produced a CO₂-depleted and slightly more saline aqueous fluid that was trapped mainly at 250°–280 °C. The predominant hydrothermal assemblage of stage 1 continued to form, but epidote is the main phase at this stage. (3) Mixing of the stage 2 aqueous fluid with a cooler and dilute aqueous fluid of meteoric origin, which was responsible for the main carbonatization phase. The mineralizing fluid was neutral to slightly alkaline and relatively reduced. H₂S (and/or HS^-) might have been the main sulfur species in the fluid and Au(HS)^2- was probably the gold transporting complex. Gold deposition occurred as a consequence of a combination of mechanisms, such as phase separation, mixing and fluid-rock interaction.The Moreira Gomes is a granite-hosted gold deposit that is interpreted to be a product of a magmatic-hydrothermal gold system. The age of ore formation (∼1.86 Ga) is consistent with the final stages of evolution of the widespread high-K, calc-alkaline Parauari Intrusive Suite, although the transitional to predominantly alkaline Maloquinha Intrusive Suite cannot be ruled out. Notwithstanding, the deposit does not show the classic features of (oxidized or reduced) intrusion-related gold deposits of Phanerozoic magmatic arcs.     

The Cretaceous (Cenomanian) continental record of the Laje do Coringa flagstone (Alcântara Formation), northeastern South America

The fossil taxa of the Cenomanian continental flora and fauna of São Luís Basin are observed primarily in the bone bed of the Laje do Coringa, Alcântara Formation. Many of the disarticulated fish and tetrapod skeletal and dental elements are remarkably similar to the chronocorrelate fauna of Northern Africa. In this study, we present a summary of the continental flora and fauna of the Laje do Coringa bone-bed. The record emphasizes the existence of a trans-oceanic typical fauna, at least until the early Cenomanian, which may be interpreted as minor evolutionary changes after a major vicariant event or as a result of a land bridge across the equatorial Atlantic Ocean, thereby allowing interchanges between South America and Africa. The paleoenvironmental conditions in the northern Maranhão State coast during that time were inferred as forested humid areas surrounded by an arid to semi-arid landscape.     

国外儿童地理学研究进展与启示

20世纪70至80年代,在地理学“空间转向”的背景下,国外儿童地理学研究兴起。2003年Children’s Geographies诞生,成为儿童地理学的旗帜性刊物,标志着儿童地理学的发展进入新阶段。借助可视化工具,系统梳理国外儿童地理学研究的核心主题、研究热点以及研究方法。研究发现：（1）国外儿童地理学的科研人员、科研机构以及研究所属区域都呈现高度集中性,欧美国家占据主导地位;（2）核心研究主题包括移民与流动身份、伦理与地区差异、教育与青年志向、童年与多元空间以及游戏与情感体验等;（3）亚洲儿童地理研究成为近期研究热点,聚焦于“跨国儿童移民”以及“亚洲青年教育及就业问题”两部分;（4）研究方法历经探索期、发展期、繁盛期以及信息技术广泛应用时期的演进,技术手段随时代发展不断更新。