脉冲多普勒天气雷达发射功率测量技术

通过分析目前国内脉冲多普勒天气雷达发射功率的测量原理和方法,总结得到测量中的计量依据、关键因子及其影响,结合在S波段脉冲多普勒天气雷达测量工作中的实际应用情况,研究科学规范且适合台站应用的雷达发射功率测量方法、技巧和关键技术。影响雷达发射功率测量准确性的因素很多,不规范的测量方法会导致较大的功率测量误差,影响雷达探测精度。研究与掌握科学规范的雷达发射功率测量技术与方法,对保证雷达检查、测试与定标的准确性有十分重要的意义。     

大地测量反演模型准外部检验的进一步探讨

给出了大地测量反演模型准外部检验的基本理论,提出了观测数据的划分方法和反演模型准外部质量控制的标准,实现了在进行反演之前对反演模型的事先检验。     

Emplacement of the La Peña alkaline igneous complex,Mendoza, Argentina (33° S): Implications for the early Miocene tectonic regime in the retroarc of the Andes

The La Peña alkaline complex (LPC) of Miocene age (18–19 Ma) lies on the eastern front of the Precordillera (32°41ʹ34ʺS, 68°59ʹ48″W, 1400–2900 m a.s.l.), 30 km northwest of Mendoza city, Argentina. It is a subcircular massif of 19 km² and 5 km in diameter, intruded in the metasedimentary sequence of the Villavicencio Formation of Silurian-Devonian age. It is the result of integration of multiple pulses derived from one or more deep magma chambers, which form a suite of silicate rocks grouped into: a clinopyroxenite body, a central syenite facies with a large breccia zone at the contact with the clinopyroxenite, bodies of malignite, trachyte and syenite porphyry necks, and a system of radial and annular dikes of different compositions. Its subcircular geometry and dike system distribution are frequent features of intraplate plutons or plutons emplaced in post-orogenic settings. These morphostructural features characterize numerous alkaline complexes worldwide and denote the importance of magmatic pressures that cause doming with radial and annular fracturing, in a brittle country rock. However, in the LPC, the attitude of the internal fabric of plutonic and subvolcanic units and the preferential layout of dikes match the NW–SE extensional fractures widely distributed in the host rock. This feature indicates a strong tectonic control linked to the structure that facilitate space for emplacement, corresponding to the brittle shear zone parallel to the N–S stratigraphy of the country rock. Shearing produced a system of discontinuities, with a K fractal fracture pattern, given by the combination of Riedel (R), anti-Riedel (R′), (P) and extensional (T) fracture systems, responsible for the control of melt migration by the opening of various fracture branches, but particularly through the NW–SE (T) fractures. Five different pulses would have ascent, (1) an initial one from which cumulate clinopyroxenite was formed, (2) a phase of mafic composition represented by dikes cross-cutting the clinopyroxenite, (3) a malignite facies that causes a small breccia in the clinopyroxenite, (4) a central syenite facies that develops breccias at the contact with the clinopyroxenite and, finally, (5) porphyry necks and a system of radial dikes intruding all units. At the moment of the emplacement different mechanisms would have acted, they summarized in: 1) opening of discontinuities synchronous to the magma circulation as the principal mechanism for formation of dikes and conduits; 2) stoping processes, that play an important role in the development of the breccia zone and enabling an efficient transference of material during the emplacement of the syenitic magma and 3) shear-related deformation (regional stress), affected the internal fabric of the facies, causing intracrystalline deformation and submagmatic flow, which is very evident in the central syenite intrusive. The kinematic analysis of shear planes allows proposing that emplacement of the LPC took place in a transtensive regime, which would have occurred in the back-arc of the Andes orogen, during a long period spanning from Miocene to the present, of the compressive deformation responsible, westward and at the same latitude, for the development of the Aconcagua fold and thrust belt.     

Evaluating the fitness for use of spatial data sets to promote quality in ecological assessment and monitoring

This article proposes and illustrates a practical methodological framework to evaluate the fitness for use of spatial data sets for environmental and ecological applications, focusing on user requirements for specified application contexts. The methodology is based on the use of metadata to analyze similarity between the data characteristics and the user’s needs or expectations for several quality indicators. Additionally, the concept of ‘critical factors’ is introduced in this framework, allowing users to define which quality indicators have greater importance given their own requirements or expectations and the specified application contexts. The proposed methodology further allows integrating and interconnecting the spatial data quality (SDQ) evaluation methodology with metadata geoportals in WebGIS platforms, facilitating its operation by users from non-spatial disciplines and with often limited expertise on this subject. Examples of the evaluation of fitness for use for specific application contexts within the project BIO_SOS (‘Biodiversity Multi-SOurce Monitoring System: From Space To Species’ FP7 project) are presented. By providing a prompt and straightforward evaluation tool, the proposed methodology can encourage the implementation of SDQ evaluation routines in ecological assessment and monitoring programs, promoting a more adequate use of geospatial data and ultimately contributing to well-supported policy and management decisions.     

液闪法测量水中氚放射性活度的淬灭效应

采用液体闪烁计数法进行放射性同位素测量时存在淬灭效应,而且几乎每个样品的淬灭程度都不同,并影响测量精度。采用液体闪烁计数法测量水中氚的放射性活度,淬灭是难以避免的,因此要进行淬灭校正,才能使不同淬灭程度的样品的测量结果具有可比性。淬灭校正的方法有很多,外标准校正法是一种比较可靠的方法。文章采用氚外标准校正法进行实验,得出淬灭校正曲线即探测效率E与淬灭参数SQP(E)的关系式为E=0.001 3SQP(E)-0.707 6,经过样品验证,该曲线是可靠的。采用外标准校正法适合于大批样品的测量。     

锡石的晶体结构和形态的关系

本文对不同成因类型的锡石晶体形态进行了研究,并从PBC(周期性键链)理论出发,讨论了锡石晶体形态与晶体结构的关系。笔者认为,锡石晶体具有三种F面,即s{111}、e{101}、m{110},与Hartman对同样结构类型的金红石晶面性质划分有所差异。据锡石晶面结构性质所推导的理想晶体形态图,与晶体测量所得到的天然晶体形态图总体上相吻合。     

Investigating the mechanisms leading to the deglaciation of past continental northern hemisphere ice sheets with the CLIMBER–GREMLINS coupled model

A coupling procedure between a climate model of intermediate complexity (CLIMBER-2.3) and a 3-dimensional thermo-mechanical ice-sheet model (GREMLINS) has been elaborated. The resulting coupled model describes the evolution of atmosphere, ocean, biosphere, cryosphere and their mutual interactions. It is used to perform several simulations of the Last Deglaciation period to identify the physical mechanisms at the origin of the deglaciation process. Our baseline experiment, forced by insolation and atmospheric CO₂, produces almost complete deglaciation of past northern hemisphere continental ice sheets, although ice remains over the Cordilleran region at the end of the simulation and also in Alaska and Eastern Siberia. Results clearly demonstrate that, in this study, the melting of the North American ice sheet is critically dependent on the deglaciation of Fennoscandia through processes involving switches of the thermohaline circulation from a glacial mode to a modern one and associated warming of the northern hemisphere. A set of sensitivity experiments has been carried out to test the relative importance of both forcing factors and internal processes in the deglaciation mechanism. It appears that the deglaciation is primarily driven by insolation. However, the atmospheric CO₂ modulates the timing of the melting of the Fennoscandian ice sheet, and results relative to Laurentide illustrate the existence of threshold CO₂ values, that can be translated in terms of critical temperature, below which the deglaciation is impeded. Finally, we show that the beginning of the deglaciation process of the Laurentide ice sheet may be influenced by the time at which the shift of the thermohaline circulation from one mode to the other occurs.     

江底盾构隧道施工期外水压分布规律的现场试验研究

重庆主城排水过江盾构隧道工程是国家重点环保工程之一,也是目前长江上最大的岩质盾构隧道。隧道采用泥水盾构机施工,其主体结构在施工期及运营期将承受0.6 MPa的高水压。研究高外水压力对隧道的影响具有重要意义,结合隧址区的地形地质及水文条件对施工期作用在盾构主体结构上的水压力进行了现场跟踪测试,探求施工期外水压力的分布规律,为盾构隧道的掘进控制提供参数,并为类似工程提供有益参考。     

利用外部DEM辅助山区SAR立体像对匹配及地形制图

SAR立体像对的匹配是利用雷达摄影测量技术提取地形高程信息的关键,匹配精度将直接影响结果 DEM的高程精度。针对山区SAR立体像对匹配过程中同名点选取困难的问题,引入外部粗分辨率DEM作为辅助数据,将该DEM高程转换为视差,为匹配提供初值,同时采用金字塔匹配策略,不仅可以缩小搜索范围,提高搜索效率,而且能够减少粗差的产生。试验结果表明,采用外部DEM辅助之后,匹配粗差点数量相对于传统的雷达摄影测量处理结果明显减少,从而有效地提高了高程信息提取重建的精度。     

利用卫星云图资料制作热带气旋预报路径的一种算法

根据台风生成后在云场中移动的环境条件,引入一个环境作用于台风中心的热力梯度力方向,用该热力梯度力方向与当前台风的移动方向相结合,研究台风移动过程的变化规律,寻找一种简易可行的台风路径预报方法．经过多年实践,本文揭示出台风中心未来沿着当前移动方向与环境作用于台风中心的热力方向合成移动的基本规律：当前台风中心移向与前方晴空区中轴线相交时,台风沿着当前移向前进到与阻挡轴线相交点相距4个纬距的位置时便发生偏转,逐渐与阻挡轴线走向趋于一致;若当前台风中心距相交点的距离小于或等于4个纬距时,则从当前位置发生偏转．文中利用以上规律研制出台风移向变化方程和移动轨迹方程．