Variations in wave direction estimated using first and second order Fourier coefficients

In most design applications such as alignment of the berthing structure and breakwater alignment, it becomes necessary to determine the direction of design wave. There are two different approaches to determine wave direction. One involves the use of first order Fourier coefficients (mean wave direction) while the other uses second order Fourier coefficients (principal wave direction). Both the average wave direction over the entire frequency range (0.03–0.58 Hz) and the direction corresponding to the peak frequency are used in practice. In the present study, comparison is made on wave directions estimated based on first and second order Fourier coefficients using data collected at four locations in the west and east coasts of India. Study shows that at all locations, the mean and principal wave directions for frequencies ranging from 0.07 to 0.25 Hz (±0.5 times peak frequency) co-vary with a correlation coefficient of 0.99 but at lower and higher frequencies, difference between the parameters is large. Average difference between the mean wave direction at peak frequency and the average over the frequency related to spectral energy more than 20% of maximum value is less, around 13°. Study shows that average difference in the sea and swell directions is around 39°.     

An inexpensive instrument for measuring benthic current velocity and direction at sea

An instrument which measures the velocity and direction of benthic water currents at depths of up to 80 m is described. Characteristics of this meter include: (i) readings are not affected by water flow during sinking or retrieval; (ii) it is portable; (iii) it operates unattended; (iv) it is inexpensive; and (v) it requires only simple maintenance. A timing circuit which operates two time periods in succession is used to activate and de-activate a revolution counter and a fluidfilled compass which are mounted on a special frame and vane system. In the field, the instrument accurately measured average current velocities of up to 6 m s⁻¹. Data are presented which illustrate the usefulness of this instrument in describing the velocity and direction of benthic currents along the east coast of Australia and demonstrate a positive correlation between benthic current velocity and catch rates of the commercially-exploited spanner crab Ranina ranina.     

一种新型测向传感器——磁通门罗盘

本文对磁通门罗盘的基本工作原理、实验线路以及主要技术指标和一些测量数据作简要介绍,最后对仪器的误差进行简单分析并提出一些减小误差的改进措施。     

A method of determining dominant wave direction from multiparameter hydrological gauge measurements and its application

Multi-parameter hydrological gauge is an instrument developed by the South China Sea Institute of Oceanology,the Chinese Academy of Sciences to make simultaneous observation of current, wave, tide, water temperature and conductivity.By using the well-known "PUV method", the directional wave spectrum can be calculated and the dominant wave direction is then obtained.The comparison of the dominant wave directions derived from the measurements using both the multi-parameter hydrological gauge and the MARK Ⅱ "Wave-Rider" directional buoy shows that the dominant wave directions derived from the two kinds of measurements are in good agreement.     

迈陈凹陷构造特征与油气勘探方向分析

迈陈凹陷位于北部湾盆地南部坳陷,是北部湾盆地的一个三级构造单元。从迈陈凹陷石油地质条件与各构造单元特征入手,详细讨论了迈陈凹陷断裂演化特征以及构造样式和构造带展布。在此基础上分析了迈陈凹陷油气成藏的主控因素和有利区带、层系。指出了迈陈凹陷可分为四个次级洼陷,其中东1洼流二段烃源岩发育情况最好,其斜坡带发育有大量的构造圈闭,与迈陈凹陷成藏匹配关系良好,是迈陈凹陷下一步勘探的主要方向。     

阿尔泰山铁格特铅多金属矿区地球化学特征及找矿方向

通过对HS-13号1∶5万地球化学异常进行大比例尺岩石地球化学测量和异常查证成果分析,在铁格特一带石炭系红山嘴组地层中构造破碎带发育部位并叠加1∶1万化探铅锌异常区是铅锌矿找矿有利靶区;石炭系红山嘴组地层与侵入体接触部位并叠加有1∶1万钨化探异常发育区是寻找钨矿的有利靶区。优选铅锌钨矿成矿靶区,且进一步工作有望形成矿产地。     

2017-08-09新疆精河Ms6.6地震附近区域相对应变的变化分析

2017年精河M_S6.6地震震前,尼勒克、巴伦台和小泉沟台钻孔应变仪记录到显著的应变变化,经现场落实确认,异常是可靠的。根据这3个台的记录资料计算相对应变的变化,结果表明,地震前最大（小）主应变大小和方向分别出现明显加速和急剧偏转变化。此外还发现,相对应变场异常期间主方向与震源机制解P轴方位较为一致。     

中国北方磷矿成矿类型和找矿方向

笔者是在“五国编图项目”(中国、俄罗斯、哈萨斯坦、蒙古国、韩国)的中国北方磷矿床资料研究基础之上完成本论文的。中国北方磷矿床分为“沉积型”、“沉积变质型”和“岩浆型”三大类型。沉积型磷矿床主要产生于晚震旦纪陡山沱期和早古生代寒武纪早期,磷质来源以海洋生物磷为主;沉积变质型磷矿床主要产生于中元古代,磷质来源以火山磷质为主,也可能有生物磷质参与;沉积型和沉积变质型磷矿都包含陆地风化迁入盆地中的磷成分;岩浆磷矿床主要产生于海西期和加里东期的超镁铁岩浆岩,多与铁、钒、钛成为成矿系列。沉积型磷矿在华北地台南缘和塔里木地块北缘应重视,而沉积变质型在华北地台北缘有远景;岩浆型则主要勘查超镁铁岩系列。     

基于Vulcan软件的山东莱州留村金矿区三维建模及资源量估值北大核心CSCD

留村金矿位于山东莱州市城区西南12 km的留村断裂带上,是发育于古老变质岩中的小型石英脉型金矿。为深入研究该矿区地层、构造与矿体在地下的延伸分布情况,加快后续数字化矿山建设,山东黄金集团应用Vulcan矿业软件对矿区开展三维地质建模。在收集相关地质实物资料的基础上,通过建立地质数据库、数据转换、地质解译等系列功能操作建立了矿区地表、岩体、构造及矿体模型,并对其进行任意剖割划分,实现了矿区地层岩性、地质构造、矿体的三维可视化,促进了本区矿体赋存规律的研究以及三维空间的成矿预测。同时利用软件强大的数据处理功能对资源量进行估值,本次估值的金资源量为1984.18 kg,与原详查报告中提交的金资源量2009.34 kg误差仅为1.25%。经估值后的每个矿块段都被赋予了精确的资源量数据,为后续矿山采矿设计与排产计划提供了准确的数据支撑,助力实现数字化、智能化矿山建设。     

利国矿区铜（金）成矿条件的研究

利国矿区是江苏省重要铁矿基地之一,矿区位于秦岭一昆仑纬向构造带东延的南侧与新华夏构造体系第三隆起带的交接复合部位。铁矿床主要产于燕山期闪长玢岩杂岩体与下奥陶统碳酸盐地层的接触带及其附近灰岩中,矿体呈似层状一透镜状等,产状与围岩一致,具层控矿床的特征。笔者主要从成矿地质特征着手,分析总结了该区铜、金矿化特征及主要成矿规律,指出了利国矿区铜（金）矿的找矿方向和有望靶区。