NEAR-FAULT DISPLACEMENT AND DEFORMATION OBTAINED FROM ONE-KILOMETER-LONG FAULT-CROSSING BASELINE MEASUREMENTS-A PRELIMINARY EXPERIMENT AT 2 SITES ON THE EASTERN BOUNDARY OF THE SICHUAN-YUNNAN BLOCK

The current and conventional fault-crossing short baseline measurement has a relatively high precision, but its measurement arrays usually fail to or cannot completely span major active fault zones due to the short length of the baselines, which are only tens to 100 meters. GNSS measurement has relatively low resolution on near-fault deformation and hence is not suitable for monitoring those faults with low motion and deformation rates, due to sparse stations and relatively low accuracy of the GNSS observation. We recently built up two experimental sites on the eastern boundary of the active Sichuan-Yunnan block, one crossing the Daqing section of the Zemuhe Fault and the other crossing the Longshu section of the Zhaotong Fault, aiming to test the measurement of near-fault motion and deformation by using fault-crossing arrays of one-kilometer-long baselines. In this paper, from a three-year-long data set we firstly introduce the selection of the sites and the methods of the measurement. We then calculate and analyze the near-field displacement and strain of the two sites by using three hypothetical models, the rigid body, elastic and composed models, proposed by previous researchers. In the rigid body model, we assume that an observed fault is located between two rigid blocks and the observed variances in baseline lengths result from the relative motion of the blocks. In the elastic model, we assume that a fault deforms uniformly within the fault zone over which a baseline array spans, and in the array baselines in different directions may play roles as strainmeters whose observations allow us to calculate three components of near-fault horizontal strain. In the composed model, we assume that both displacement and strain are accumulated within the fault zone that a baseline array spans, and both contribute to the observed variances in baseline lengths. Our results show that, from the rigid body model, variations in horizontal fault-parallel displacement component of the Zemuhe Fault at the Daqing site fluctuate within 3mm without obvious tendencies. The displacement variation in the fault-normal component keeps dropping in 2015 and 2016 with a cumulative decrease of 6mm, reflecting transverse horizontal compression, and it turns to rise slightly(suggesting extension)in 2017. From the elastic model, the variation in horizontal fault-normal strain component of the fault at Daqing shows mainly compression, with an annual variation close to 10^-5, and variations in the other two strain components are at the order of 10^-6. For the Longshu Fault, the rigid-body displacement of the fault varies totally within a few millimeters, but shows a dextral strike-slip tendency that is consistent with the fault motion known from geological investigation, and the observed dextral-slip rate is about 0.7mm/a on average. The fault-parallel strain component of the Longshu Fault is compressional within 2×10^-6, and the fault-normal strain component is mainly extensional. Restricted by the assumption of rigid-body model, we have to ignore homolateral deformation on either side of an observed fault and attribute such deformation to the fault displacement, resulting in an upper limit estimate of the fault displacement. The elastic model emphasizes more the deformation on an observed fault zone and may give us information about localizations of near-fault strain. The results of the two sites from the composed model suggest that it needs caution when using this model due to that big uncertainty would be introduced in solving relevant equations. Level surveying has also been carried out at the meantime at the two sites. The leveling series of the Daqing site fluctuates within 4mm and shows no tendency, meaning little vertical component of fault motion has been observed at this site; while, from the rigid-body model, the fault-normal motion shows transverse-horizontal compression of up to 6mm, indicating that the motion of the Zemuhe Fault at Daqing is dominantly horizontal. The leveling series of the Longshu site shows a variation with amplitude comparable with that observed from the baseline series here, suggesting a minor component of thrust faulting; while the baseline series of the same site do not present tendencies of fault-normal displacement. Since the steep-dip faults at the two sites are dominantly strike-slip in geological time scale, we ignore probable vertical movement temporarily. In addition, lengths of homolateral baselines on either side of the faults change somewhat over time, and this makes us consider the existence of minor faults on either side of the main faults. These probable minor faults may not reach to the surface and have not been identified through geological mapping; they might result in the observed variances in lengths of homolateral baselines, fortunately such variations are small relative to those in fault-crossing baselines. In summary, the fault-crossing measurement using arrays with one-kilometer-long baselines provides us information about near-fault movement and strain, and has a slightly higher resolution relative to current GNSS observation at similar time and space scales, and therefore this geodetic technology will be used until GNSS networks with dense near-fault stations are available in the future.     

Rainfall,runoff and shallow groundwater response in a mixed-use,agro-forested watershed of the northeast,USA

Stream and shallow groundwater responses to rainfall are characterized by high spatial variability, but hydrologic response variability across small, agro-forested sub-catchments remains poorly understood. Conceivably, improved understanding in this regard will result in agricultural practices that more effectively limit nutrient runoff, erosion, and pollutant transport. Terrestrial hydrologic response approaches can provide valuable information on stream-aquifer connectivity in these mixed-use watersheds. A study was implemented, including eight stream and co-located shallow groundwater monitoring sites, in a small sub-catchment of the Chesapeake Bay watershed in the Northeast, USA to advance this ongoing need. During the study period, 100 precipitation-receiving days (i.e., 24-hour periods, midnight to midnight) were observed. On average, the groundwater table responded more to precipitation than stream stage (level change of 0.03 vs. 0.01 m and rainfall-normalized level change estimate of 3.81 vs. 3.37). Median stream stage responses, groundwater table responses, and response ratios were significantly different between sub-catchments (n = 8; p < 0.001). Study area average precipitation thresholds for runoff and shallow groundwater flow were 2.8 and 0.6 cm, respectively. Individual sub-catchment thresholds ranged from 0.5 to 2.8 cm for runoff and 0.2 to 1.3 cm for shallow groundwater flow. Normalized response lag times between the stream and shallow groundwater ranged from −0.50 to 3.90 s·cm⁻¹, indicating that stormflow in one stream section was regulated by groundwater flow during the period of study. The observed differences in hydrologic responses to precipitation advance future modelling efforts by providing examples of how terrestrial groundwater response methods can be used to investigate sub-catchment spatial variability in stream-aquifer gradients with co-located shallow groundwater and stream stage data. Additionally, results demonstrate asynchronous stream and shallow groundwater responses on precipitation-receiving days, which may hold important implications for modelling hydrologic and biogeochemical fate and transport processes in small, agro-forested catchments.     

Water source characterization through spatiotemporal patterns of major,minor and trace element stream concentrations in a complex,mesoscale German catchment

The link between spatiotemporal patterns of stream water chemistry and catchment characteristics for the mesoscale Dill catchment (692 km²) in Germany is explored to assess the catchment scale controls on water quality and to characterize water sources. In order to record the spatiotemporal pattern, ‘snapshot sampling’ was applied during low, mean and high flow, including 73 nested sites throughout the catchment. Water samples were analysed for the elements Li, B, Na, Mg, Al, K, Ca, V, Cr, Mn, Fe, Co, Ni, Cu, Zn, Rb, Sr, Mo, Ba, Pb and U using inductively‐coupled‐plasma mass spectrometry, and for electric conductivity and pH. Principle component analysis and hierarchical cluster analysis were used to find typical element associations and to group water samples according to their hydrochemical fingerprints. This revealed regional hydrochemical patterns of water quality which were subsequently related to catchment attributes to draw conclusions about the controls on stream chemistry. It was found that various lithologic signals and anthropogenic point source inputs controlled the base flow hydrochemistry. During increased flows, stream waters were diluted causing additional hydrochemical variability in response to heterogeneous precipitation inputs and differences in aquifer storage capacities. The hydrochemical patterns further displayed in‐stream mixing of waters. This implied, that stream waters could be apportioned to the identified water sources throughout the catchment. The basin‐wide hydrochemical variability has the potential to outrange the tracer signatures typically inferred in studies at the hillslope scale and is able to strongly influence the complexity of the catchment output. Both have to be considered for further catchment scale tracer and modelling work. Despite the likelihood of non‐conservative behaviour, the minor and trace elements enhanced the rather qualitative discrimination of the various groundwater types, as the major cations were strongly masked by point source inputs. Copyright © 2007 John Wiley & Sons, Ltd.     

Synthesis, Characterization and Antibacterial Activity of New Ln（Ⅲ ） Complexes with an Unsymmetrical Schiff Base Ligand

1Introduction SomeSchiffbasecomplexesderivedfromaminoacidsareparticularlyactiveinbiologycatalysisandmaterial.Thestudyofthemisfocusofthestudyof coordinationchemistry.Recently,studiesofsuchmetalcomplexesofmono Schiffbaseshavebeenre ported(Fanetal.,2003a,b;L…     

Experimental research on horizontal bearing behavior of caisson-pile composite foundationEI北大核心CSCD

In this study, four groups of different types of bridge foundation model are tested to research the horizontal bearing behavior of caisson-pile composite foundation in lab based on the Qiongzhou Strait bridge project. The Q-s curve and horizontal ultimate bearing capacity of these four groups of foundations in sandy soil layer are obtained. Pile bending moment and shear force of pile shaft are analyzed in detail. At the same time, the load sharing ratio of caisson and piles is discussed. The results show that the horizontal ultimate bearing capacities of a single caisson foundation are increased by 1.2 times, 1.6 times and 2 times respectively with adding skirts, steel pipe pile, or steel pipe pile and the skirt. The maximum bending moment point is in the middle of the pile shaft, i.e. at about 0.5 m under the mud surface. The horizontal load is borne mainly by the upper caisson foundation and soil layers above the middle upper part of pile. The maximum shear force is found at the joint of pile top of steel pipe and caisson pile, where the reinforcement measures should be taken in practical engineering. The research achievements could provide a better reference for design or construction of caisson-pile composite foundation.     

正弦激励下零浮力海洋拖缆动力特性与实验研究

海洋地震拖缆是海洋油气资源勘探中的关键设备,为研究海洋地震拖缆的动力特性及其在不同频率正弦激励干扰下的动力响应,建立了零浮力拖缆的数学模型,设计了一套完整的实验方案,通过弹性测力机构放大张力信号以排除环境干扰,测量了不同拖曳速度与激振频率条件下拖缆首部的张力变化及缆上位移响应情况,初步分析了正弦激励作用下零浮力拖缆的动力学响应。弹性测力机构具有良好的线性度与可重复性,拖缆受到的水阻力与拖曳速度的平方成正比,数值计算与实验结果对比验证了数学模型的正确性,初步分析了正弦激励作用下零浮力拖缆的动力学响应。     

Analytical and Experimental Studies on Hydrodynamic Performance of Semi-Immersed Jarlan-Type Perforated Breakwaters

The present study proposes a new semi-immersed Jarlan-type perforated breakwater including a perforated front wall, a solid rear wall, and a horizontal perforated plate connecting the lower tips of the two walls. An analytical solution is developed to estimate the hydrodynamic performance of the new breakwater. The analytical solution is confirmed by solutions for special cases, an independently developed multi-domain boundary element method solution and experimental data. Numerical examples based on the analytical solution indicate that compared with previous semi-immersed breakwaters, the new breakwater may have better wave-absorbing performance and smaller wave forces. Some useful results are presented for practical designs of semi-immersed Jarlan-type perforated breakwaters.     

疫情背景下基于仿真实训平台的“测量学”实验教学改革

虚拟仿真实验是疫情背景下测量学实验教学的主要模式,是实验教学智能化的重要环节。文中结合南方测绘虚拟仿真教学系统,以东华理工大学测绘工程专业基础核心课程—“测量学”为例,从虚实融合的混合式实验教学模式和课程考核模式两个方面对疫情背景下“测量学”实验教学进行了改革。实践结果表明,混合式实验教学能有效增强学生的实训兴趣与激情,通过线上反复练习、线下实操,显著提高学生的实践技能,为后疫情时代“测量学”实验教学课程改革提供新模式。     

不同卸荷速率下岩石强度特性研究

卸荷条件下的岩石强度特性研究对于分析开挖作用下岩石工程的安全性具有极为重要的意义。卸荷试验中影响岩石强度的因素很多,包括岩性、卸荷点的位置、卸荷应力路径和卸荷速率等,以锦屏大理岩为对象,重点研究卸荷速率对强度的影响。提出用屈服接近速率来统一表征加荷和卸荷下的应力增加或减小的速率,通过比较加荷和卸荷条件下的屈服接近速率表明,当围压卸荷速率为常规试验轴向应力加荷速率的0.2～0.3倍时,两种应力路径下接近破坏时的屈服接近速率相当。通过2D弹塑性细胞自动机的数值试验和大理岩的室内卸围压试验来验证理论分析的结果,表明:围压卸荷速率越大,岩样的强度就越高;当卸荷速率为常规轴向加荷速率的0.2～0.3倍时,卸荷和加荷路径下的强度相当。从而得出结论:对于各种卸荷应力路径,如果卸荷点处于弹性范围内,当接近破坏时的屈服接近速率一定时,应力路径对强度的影响不明显。     

甲烷水合物在人工毛细管沉积物柱中的形成和分解

天然气水合物在海底的形成与沉积物性质密切相关,沉积物的粒度、孔隙度、矿物组成等都可以影响到水合物的成核生长。通过拉曼测试和显微镜下观察人工毛细管模拟沉积物中CH4水合物的形成和分解过程,实验发现无论是在气液界面还是在溶有过饱和CH4的流体内,水合物都能够成核形成,但水合物更容易在气液和固液界面成核,并迅速生长;水合物在较大粒径石英砂(39~53μm)形成的孔隙内的成核机会比在粘土粒级的砂粒孔隙中的机会更大;水合物晶体主要呈发丝状附着于沉积物颗粒表面。