Analytical method of radiation by a wave energy device with dual rectangular floating bodies

The system with one floating rectangular body on the free surface and one submerged rectangular body has been applied to a wave energy conversion device in water of finite depth. The radiation problem by this device on a plane incident wave is solved by the use of an eigenfunction expansion method, and a new analytical expression for the radiation velocity potential is obtained. The wave excitation force is calculated via the known incident wave potential and the radiation potential with a theorem of Haskind employed. To verify the correctness of this method, an example is computed respectively through the bound element method and analytical method. Results show that two numerical methods. are in good agreement, which shows that the present method is applicable. In addition, the trends of hydrodynamic coefficients and wave force are analyzed under different conditions by use of the present analytical method.     

Improvement of the axial trapping effect using azimuthally polarised trapping beam

A dual optical tweezers system, which consists of a doughnut mode optical tweezer (DMOT) with the azimuthally polarised trapping beam and a solid mode optical tweezer (SMOT) with the Gauss trapping beam was constructed to compare the axial trapping effect of DMOT and SMOT. The long-distance axial trapping of ST68 microbubbles (MBs) achieved by DMOT was more stable than that of SMOT. Moreover the axial trapping force measured using the viscous drag method, was depended on the diameter of the particle, the laser power, and the numerical aperture (NA) of the objective lens. The measurement of the axial trapping force and the acquisition of CCD images of trapping effect confirmed that the DMOT showed excellent axial trapping ability than SMOT. A simple and effective method is developed to improve axial trapping effect using the azimuthally polarized beam as trapping beam. This is helpful for the long-distance manipulating of particles especially polarised biological objects in axial direction.     

The anomalous radiation force of light on a left-handed material

This paper derives the force of the electromagnetic radiation on left-handed materials (LHMs) by a direct application of the Lorentz law of classical electrodynamics. The expressions of radiation force are given for TE-polarised and TM-polarised fields. The numerical results demonstrate that electromagnetic waves exert an inverse lateral radiation force on each edge of the beams, that is, the lateral pressure is expansive for TE-polarised beams and compressive for TM-polarised beams. The investigation of the radiation force will provide insights into the fundamental properties of LHMs and will provide to better understanding of the interaction of light with LHMs.     

Tsunami-like solitary waves impinging and overtopping an impermeable seawall: Experiment and RANS modeling

This study investigates tsunami-like solitary waves impinging and overtopping an impermeable trapezoidal seawall on a 1:20 sloping beach. New laboratory experiments are performed for describing three typical cases: a turbulent bore rushes inland and subsequently impacts and overtops the seawall (Type 1); a wave directly collapses on the seawall and then generates overtopping flow (Type 2); and, a wave straightforwardly overtops the seawall crown and collapses behind the seawall (Type 3). A two-dimensional volume of fluid (VOF) type model called the COBRAS (COrnell BReaking And Structure) model, which is based on the Reynolds-Averaged Navier–Stokes (RANS) equations and the k–ε turbulence closure solver, is validated by experimental data and then applied to investigate wave dynamics for which laboratory data are unavailable. Additionally, a set of numerical experiments is conducted to examine the dynamic wave acting force due to waves impacting the seawall. Effects of wave nonlinearity and freeboard are elucidated. Special attention is given to a distinct vortex evolutionary behavior behind the seawall, in which the dynamic properties of entrapped air-bubbles are briefly addressed experimentally and numerically.     

Experimental Investigation of Irregular Wave Uplift Force on Deck of Exposed High-Pile Jetties

A laboratory setup was developed to investigate irregular wave uplift loads on exposed high-pile jetties.It is shown that the dimensionless uplift load increases to the maximum with an increasing relative clearance and then decreases.The relative clearance corresponding to the peak force is linked to a range from 0.4 to 0.8.When the relative clearance exceeds a certain value,the wave can not reach the underside of the deck and the force becomes zero.Distinct trends of dimensionless force with a relative width of deck show that the force tends to decrease as the relative deck width increases,and then the decrease slows down after the relative deck width increases or decreases to a certain value.The pressure distribution length associated with the maximum uplift force is equivalent to the wave contact width x.When x is larger than the width of deck B,it is taken as B.The statistical distribution of loads obeys the Weibull distribution.The results from the analyses of the real data suggest a new dimensionless prediction model on wave-in-deck uplift loads and the conversion ratio between wave loads at different exceedance probabilities.A comparison is made between the new prediction model and the existing widely used three prediction models.These results are used as useful references for structural design of the jetty.     

基于STIRPAT模型的内蒙古沙漠化地区环境压力分析

实现经济与生态环境的协调发展,已经成为当前治理沙漠化的巨大挑战。如何定量分析人类活动和自然条件对环境的影响,是当前环境经济学界研究的热点问题。以内蒙古自治区71个沙漠化县为研究对象,以1986-2010年为研究区间做面板空间计量实证分析。选取了人口、富裕度、技术水平、风速和降水作为环境基础指标构建STIRPAT模型,从环境压力内在驱动角度定量分析不同的自然因素和人为因素对沙漠化地区环境的综合影响。结果表明:在观测数据范围内,富裕度、技术水平、风速和降水是内蒙古自治区环境压力的主要驱动因素;富裕度每增加1%,环境压力显著增加0.096%;技术水平每变化1%,将引起环境压力相应发生0.084%的变化;风速和降水每变动1%分别使得沙漠地区环境压力显著地增加0.640%和减少0.216%。     

Three-dimensional liquid sloshing in a tank with baffles

A numerical model has been developed to study three-dimensional (3D) liquid sloshing in a tank with baffles. The numerical model solves the spatially averaged Navier-Stokes equations, which are constructed on a non-inertial reference frame having six degree-of-freedom (DOF) of motions. The large-eddy-simulation (LES) approach is employed to model turbulence by using the Smagorinsky sub-grid scale (SGS) closure model. The two-step projection method is employed in the numerical solutions, aided by the Bi-CGSTAB technique to solve the pressure Poisson equation for the filtered pressure field. The second-order accurate volume-of-fluid (VOF) method is used to track the distorted and broken free surface. The baffles in the tank are modeled by the concept of virtual boundary force (VBF) method. The numerical model is first validated against the available analytical solution and experimental data for two-dimensional (2D) liquid sloshing in a tank without baffles. The 2D liquid sloshing in tanks with baffles is then investigated. The numerical results are compared with other results from available literatures. Good agreement is obtained. Finally, the model is used to study 3D liquid sloshing in a tank with vertical baffles. The effect of the baffle is investigated and discussed.     

Nonlinear random wave-induced drag force on a vegetation field

This paper provides a practical method by which the drag force on a vegetation field beneath nonlinear random waves can be estimated. This is achieved by using a simple drag formula together with an empirical drag coefficient given by Mendez et al. (Mendez, F.J., Losada, I.J., Losada, M.A., 1999. Hydrodynamics induced by wind waves in a vegetation field. J. Geophys. Res. 104 (C8), 18383–18396). Effects of nonlinear waves are included by using Stokes second order wave theory where the basic harmonic motion is assumed to be a stationary Gaussian narrow–band random process. An example of calculation is also presented.     

Model Test Study on Ice-Induced Vibrations of Compliant Multi-Cone Structures

For the study on the ice-induced vibration of a compliant mono-cone structure,a series of model tests were performed from 2004 to 2006.In these tests,the ice sheet before the compliant conical structure was found to be failed in two-time breaking.Based on this important finding,model tests study of the ice force on a compliant multi-cone structure were performed from 2006 to 2007.in these tests,the ice sheet broke before each single cone non-simultaneously.The exciting energy of the total ice force was found to be in a wide range of frequencies,and the structure can be easily excited with nonlinear resonance.     

利用卫星云图资料制作热带气旋预报路径的一种算法

根据台风生成后在云场中移动的环境条件,引入一个环境作用于台风中心的热力梯度力方向,用该热力梯度力方向与当前台风的移动方向相结合,研究台风移动过程的变化规律,寻找一种简易可行的台风路径预报方法．经过多年实践,本文揭示出台风中心未来沿着当前移动方向与环境作用于台风中心的热力方向合成移动的基本规律：当前台风中心移向与前方晴空区中轴线相交时,台风沿着当前移向前进到与阻挡轴线相交点相距4个纬距的位置时便发生偏转,逐渐与阻挡轴线走向趋于一致;若当前台风中心距相交点的距离小于或等于4个纬距时,则从当前位置发生偏转．文中利用以上规律研制出台风移向变化方程和移动轨迹方程．