Effects of fracture lineaments and in-situ rock stresses on groundwater flow in hard rocks: a case study from Sunnfjord, western Norway

Systematic field mapping of fracture lineaments observed on aerial photographs shows that almost all of these structures are positively correlated with zones of high macroscopic and mesoscopic fracture frequencies compared with the surroundings. The lineaments are subdivided into zones with different characteristics: (1) a central zone with fault rocks, high fracture frequency and connectivity but commonly with mineral sealed fractures, and (2) a damage zone divided into a proximal zone with a high fracture frequency of lineament parallel, non-mineralized and interconnected fractures, grading into a distal zone with lower fracture frequencies and which is transitional to the surrounding areas with general background fracturing. To examine the possible relations between lineament architecture and in-situ rock stress on groundwater flow, the geological fieldwork was followed up by in-situ stress measurements and test boreholes at selected sites. Geophysical well logging added valuable information about fracture distribution and fracture flow at depths. Based on the studies of in-situ stresses as well as the lineaments and associated fracture systems presented above, two working hypotheses for groundwater flow were formulated: (i) In areas with a general background fracturing and in the distal zone of lineaments, groundwater flow will mainly occur along fractures parallel with the largest in-situ rock stress, unless fractures are critically loaded or reactivated as shear fractures at angles around 30° to σ_H; (ii) In the influence area of lineaments, the largest potential for groundwater abstraction is in the proximal zone, where there is a high fracture frequency and connectivity with negligible fracture fillings. The testing of the two hypotheses does not give a clear and unequivocal answer in support of the two assumptions about groundwater flow in the study area. But most of the observed data are in agreement with the predictions from the models, and can be explained by the action of the present stress field on pre-existing fractures.     

Natural and man-induced stress evolution of slopes: the Monte Mario hill in Rome

The paper deals with stress-release effects induced by man-made cuts or excavations into natural stiff clay slopes that experienced erosion in response to valley deepening. The study was focused on the Monte Mario hill in Rome (Italy), which formed part of an area of recent urban expansion. The methodology of the study relied on a reference engineering-geology model, which was developed on the basis of site and laboratory data and stress–strain analyses. The latter analyses were carried out with the finite-difference code FLAC 4.0. Numerical modelling was based on a sequential approach, taking into account the main evolutionary stages of the Tiber river valley in Romeȁ9s urban area and then making cuts at the bottom of the slope located south of the Monte Mario Astronomical Observatory. The simulation revealed the stress-release effects that fluvial erosion and excavation fronts have caused on the investigated slopes and their consequent gravitational instabilities. These processes appear with metre-scale displacements, followed by stress-release cracks (actually observed on the slopes under review). In quantifying stress-release deformations, the simulation took into account the possible role of creep in the observed retardation of stress-release effects.Research activities were carried on with the co-operation of Dȁ9Arcangelo A. (Consorzio TREESSE, andrea.darcangelo@libero.it) and Moretti S. (IMG S.r.l. Servizi Tecnici per lȁ9Ingegneria e lȁ9Ambiente, moretti@img-srl.it)     

Initiation and development of pull-apart basins with Riedel shear mechanism: insights from scaled clay experiments

Typical pull-apart structures were created in scaled clay experiments with a pure strike-slip geometry (Riedel type experiments). A clay slab represents the sedimentary cover above a strike-slip fault in the rigid basement. At an early stage of the development of the deformation zone, synthetic shear fractures (Riedel shears) within the clay slab display dilatational behaviour. With increasing basal displacement the Riedel shears rotate and open further, developing into long, narrow and deep troughs. The shear displacement and the low angle with the prescribed principal basal fault set them apart from tension gashes. At a more evolved stage, synthetic segments (Y-shears) parallel to the basal principal fault develop and accommodate progressive strike-slip deformation. The Y-shears connect the tips of adjacent troughs developed from the earlier Riedel shears, resulting in the typical rhomb-shaped structures characteristic for pull-apart basins. The Strait of Sicily rift zone, with major strike-slip systems being active from the Miocene to the Present, comprises pull-apart basins at different length scales, for which the structural record suggests development by a mechanism similar to that observed in our experiments.     

基于点重要度的地形LOD简化算法及精度

在分析、讨论目前关于3维地形模型简化与误差控制方法的基础上,提出了一种基于点重要度进行连续LOD模型简化的算法.并以5种典型地貌的实验数据作为运行实例,给出了点重要度与地貌类型之间的精度关系.这为今后连续LOD模型的合理建立提供了一种新思路和方法,也为模型的简化提供了科学依据.     

东准噶尔纸房地区晚石炭世巴塔玛依内山组陆相火山-沉积体系特征

东准噶尔巴塔玛依内山组是典型陆相火山．沉积体系(盆地)，主体由基性及中酸性火山熔岩组成，火山碎屑岩及火山碎屑沉积岩较少，通过对纸房地区晚石炭世巴塔玛依内山组陆相火山岩的岩石化学、地球化学特征进行系统研究，认为它属于造山期后固结初期，新陆壳裂谷向高原火山岩演化的同岩浆源、同沉积盆地、同火山作用的钙碱系列双峰式火山岩．     

辽河盆地冷家油田沙河街组三段储层岩相古地理

辽河盆地在沙河街组三段早期水体较深,主要形成扇三角洲及盆底扇;沙三晚期水体较浅,发育湖泊砂体.依据沉积相分布规律,沙三早、中、晚3个时期可进一步分别划分出湖泊扩张和收缩阶段.盆地西部凹陷的冷家油田为东陡西缓的箕状洼陷.研究区内沙三段的古地理格局是决定相分布的关键因素,河流和湖泊能量相对强弱决定扇体沉积的规模.受相对湖平面变化的影响,纵向扇三角洲主要形成于湖泊扩张时期,并且有相带窄、过渡快、以粗碎屑沉积为主的特点.扇体沉积中主要发育前缘分流河道充填沉积,但位于河口前缘或侧缘的滩坝及前三角洲中的盆底扇局部也较发育.     

胜利油田车镇凹陷沙河街组二、三段沉积相

车镇凹陷古近系沙河街组三段上亚段-二段下亚段是较为典型的深断陷型三级层序.层序的发育主要受控于幕式断陷作用,可进一步划分出低位体系域、湖侵体系域和高位体系域.通过岩心观察、薄片镜下鉴定、粒度分析、古生物及遗迹化石分析,并综合利用测井曲线和地震相特征,认为该时期主要发育有扇三角洲、三角洲、近岸水下扇、湖底扇、滨浅湖滩坝等骨架砂体相,以及滨浅湖、半深湖-深湖等沉积相及其亚相.综合考虑物源特征、沉积环境、沉积体系平面展布以及生、储、盖组合关系,认为有利的沉积相带主要是三角洲、扇三角洲前缘、湖底扇、近岸水下扇的中扇和外扇以及滨浅湖中发育的滩坝和砂坝.     

Spatial process and data models: Toward integration of agent-based models and GIS

The use of object-orientation for both spatial data and spatial process models facilitates their integration, which can allow exploration and explanation of spatial-temporal phenomena. In order to better understand how tight coupling might proceed and to evaluate the possible functional and efficiency gains from such a tight coupling, we identify four key relationships affecting how geographic data (fields and objects) and agent-based process models can interact: identity, causal, temporal and topological. We discuss approaches to implementing tight integration, focusing on a middleware approach that links existing GIS and ABM development platforms, and illustrate the need and approaches with example agent-based models.     

改进的切线性模式对一个边界层模式变分资料同化的改善

大气、海洋中边界层物理过程的强非线性会对切线性模式近似（尤其是当积分时间长时）有较大的影响，从而给相应的4维变分资料同化问题的求解造成困难。本构造了Mellor-Yamada湍流封闭模式（level 2.5)的一个改进的切线性模式，相比通常的切线性模式和简化的切线性模式可以提高对非线性扰动的逼近。利用这个改进的切线性模式的伴随模式分别进行了1到7天的变分资料同化试验，得到了满意的结果。而用通常的伴随模式和简化的伴随模式都无法得到令人满意的结果。     

Seismic response of self‐centring hysteretic SDOF systems

The seismic response of single‐degree‐of‐freedom (SDOF) systems incorporating flag‐shaped hysteretic structural behaviour, with self‐centring capability, is investigated numerically. For a SDOF system with a given initial period and strength level, the flag‐shaped hysteretic behaviour is fully defined by a post‐yielding stiffness parameter and an energy‐dissipation parameter. A comprehensive parametric study was conducted to determine the influence of these parameters on SDOF structural response, in terms of displacement ductility, absolute acceleration and absorbed energy. This parametric study was conducted using an ensemble of 20 historical earthquake records corresponding to ordinary ground motions having a probability of exceedence of 10% in 50 years, in California. The responses of the flag‐shaped hysteretic SDOF systems are compared against the responses of similar bilinear elasto‐plastic hysteretic SDOF systems. In this study the elasto‐plastic hysteretic SDOF systems are assigned parameters representative of steel moment resisting frames (MRFs) with post‐Northridge welded beam‐to‐column connections. In turn, the flag‐shaped hysteretic SDOF systems are representative of steel MRFs with newly proposed post‐tensioned energy‐dissipating connections. Building structures with initial periods ranging from 0.1 to 2.0s and having various strength levels are considered. It is shown that a flag‐shaped hysteretic SDOF system of equal or lesser strength can always be found to match or better the response of an elasto‐plastic hysteretic SDOF system in terms of displacement ductility and without incurring any residual drift from the seismic event. Copyright © 2002 John Wiley & Sons, Ltd.