Cracking risk of partially saturated porous media—Part I: Microporoelasticity model

Drying of deformable porous media results in their shrinkage, and it may cause cracking provided that shrinkage deformations are hindered by kinematic constraints. This is the motivation to develop a thermodynamics‐based microporoelasticity model for the assessment of cracking risk in partially saturated porous geomaterials. The study refers to 3D representative volume elements of porous media, including a two‐scale double‐porosity material with a pore network comprising (at the mesoscale) 3D mesocracks in the form of oblate spheroids, and (at the microscale) spherical micropores of different sizes. Surface tensions prevailing in all interfaces between solid, liquid, and gaseous matters are taken into account. To establish a thermodynamics‐based crack propagation criterion for a two‐scale double‐porosity material, the potential energy of the solid is derived, accounting—in particular—for mesocrack geometry changes (main original contribution) and for effective micropore pressures, which depend (due to surface tensions) on the pore radius. Differentiating the potential energy with respect to crack density parameter yields the thermodynamical driving force for crack propagation, which is shown to be governed by an effective macrostrain. It is found that drying‐related stresses in partially saturated mesocracks reduce the cracking risk. The drying‐related effective underpressures in spherical micropores, in turn, result in a tensile eigenstress of the matrix in which the mesocracks are embedded. This way, micropores increase the mesocracking risk. Model application to the assessment of cracking risk during drying of argillite is the topic of the companion paper (Part II). Copyright © 2009 John Wiley & Sons, Ltd.     

地面三维激光扫描仪测量误差检定

在利用三维激光扫描仪进行测量工作前,我们首先应了解其实际测量精度是否符合标称精度,而可靠的评价方式对得到精确的数据结果至关重要。本文利用北京卓立汉光TSA50-C型电动位移台作为评价标准,通过其精确的位移功能,准确地评价了RIGEL VZ-400三维激光扫描仪在测量单点位移时的误差,从而得到了其最佳工作距离。     

GPS精密卫星钟差估计研究

随着精密单点定位技术的发展,对于精确的卫星坐标以及卫星钟差改正精度的要求越来越高,精密卫星星历以及精密卫星钟差的求解成为制约精密单点定位技术发展的瓶颈。本文基于修复周跳的载波相位观测值与相位平滑伪距观测值,采用无电离层延迟星间单差精密卫星钟差估计模型,在先估计出整周模糊度后,进行了精密卫星钟差的估计,并采用与IGS事后精密钟差作二次差的方法进行精度分析,这对于提高精密单点定位精度具有一定的意义。     

AEKF在星敏感器低频误差补偿中的应用

高分辨率对地观测卫星需要精确的姿态信息来满足后续对地定位等工作,因此姿态确定精度十分重要。星敏感器的低频误差是影响卫星姿态确定精度的重要因素之一,主要是由空间周期性的热环境变化引起的。为进一步提高卫星姿态确定精度,对星敏感器的低频误差产生机理即星敏感器主光轴做周期性扰动进行了分析,设计了星敏感器低频误差补偿方案,建立了考虑星敏感器低频误差在内的组合定姿模型,利用拓维卡尔曼滤波(AEKF)对低频误差进行补偿,并引入RTS平滑滤波进一步提高姿态确定精度。仿真实验表明,设计的星敏感器低频误差补偿方案能有效对其进行补偿,提高卫星姿态确定精度。     

Investigation of directional hydraulic fracturing based on true tri-axial experiment and finite element modeling

The initiation and propagation of directional hydraulic fracturing (DHF) was investigated based on true tri-axial experiment and finite element modeling. The influences of notch angle, notch length and injection rate on the DHF were investigated. The initiation and propagation of DHF was modeled by a 3D nonlinear finite element method. A comparison between experimental investigation and numerical modeling results indicates that there is a good correlation between unbalanced force (UF) and fracturing. UF can be used to predict the hydraulic fracture initiation and propagation.     

Possible sources of forecast errors generated by the global/regional assimilation and prediction system for landfalling tropical cyclones. Part I: Initial uncertainties

This paper investigates the possible sources of errors associated with tropical cyclone (TC) tracks forecasted using the Global/Regional Assimilation and Prediction System (GRAPES). The GRAPES forecasts were made for 16 landfalling TCs in the western North Pacific basin during the 2008 and 2009 seasons, with a forecast length of 72 hours, and using the default initial conditions (“initials”, hereafter), which are from the NCEP-FNL dataset, as well as ECMWF initials. The forecasts are compared with ECMWF forecasts. The results show that in most TCs, the GRAPES forecasts are improved when using the ECMWF initials compared with the default initials. Compared with the ECMWF initials, the default initials produce lower intensity TCs and a lower intensity subtropical high, but a higher intensity South Asia high and monsoon trough, as well as a higher temperature but lower specific humidity at the TC center. Replacement of the geopotential height and wind fields with the ECMWF initials in and around the TC center at the initial time was found to be the most efficient way to improve the forecasts. In addition, TCs that showed the greatest improvement in forecast accuracy usually had the largest initial uncertainties in TC intensity and were usually in the intensifying phase. The results demonstrate the importance of the initial intensity for TC track forecasts made using GRAPES, and indicate the model is better in describing the intensifying phase than the decaying phase of TCs. Finally, the limit of the improvement indicates that the model error associated with GRAPES forecasts may be the main cause of poor forecasts of landfalling TCs. Thus, further examinations of the model errors are required.     

变分同化框架通过背景误差协方差构建动力平衡约束的研究进展

通过背景误差协方差构建动力平衡约束是变分同化框架设计的重要环节。它不仅帮助实现变量间的协同分析,提高观测使用效率,还能改善变分极小化问题的性状。本文在系统梳理通过背景误差协方差引入动力平衡约束的方式、流程的基础上,对求解目前全球和有限区域变分同化系统普遍采用的准地转平衡和静力平衡约束的共性问题和存在的不足作了归纳总结。分析了求解准地转平衡约束的三类方案:动力平衡方程方案、统计方案和动力-统计相结合方案的优缺点。对照比较了不同垂直离散方案下求解静力平衡约束时遇到的欠定问题的表现以及解决途径。最后,展望了基于背景误差协方差构建动力平衡约束在赤道等特殊地区、高分辨率同化系统、以及集合-变分混合同化系统发展中面临的挑战和机遇。     

多普勒雷达观测在北京7.21暴雨数值模拟中的三维变分同化研究

基于背景误差的特征长度理论,研究调整背景误差水平分辨率对多普勒雷达资料三维变分同化的影响。首先利用NMC方法针对暴雨落区统计不同水平分辨率的背景误差协方差,分析两种不同分辨率的背景误差的结构特征,研究水平分辨率对背景误差特征长度的影响。将其应用于雷达资料同化中,研究背景误差水平分辨率变化对雷达资料同化的影响。结果表明:背景误差水平分辨率由27 km提高到3 km时,在大气低层体现出更细致的动力场信息,其动力场水平特征长度按水平分辨率的二次根递减,而温度场与水汽场水平特征长度变化不明显。在将不同分辨率的背景误差用于三维变分同化时,更高分辨率的背景误差可以在分析场增量中体现更细致的中小尺度信息,能够明显改善雷达径向速度资料同化效果,并在随后的暴雨数值模拟中雨量及其分布形态更接近实况。     

利用Abel-Poisson径向基函数模型化局部重力场

多种类型高分辨率重力场数据的不断增加,使得在局部范围内精化重力场模型成为了可能。本文采用Abel-Poisson核将重力场量表示成有限个径向基函数线性求和的形式,对局部区域的多种重力场数据进行联合建模。为了提高运算速度,运用了基于自适应精化格网算法的最小均方根误差准则(RMS)来求解径向基函数平均带宽。以南海核心地区为例,联合两种不同类型、不同分辨率的重力场资料(大地水准面起伏6'×6'、重力异常2'×2'),构建了局部区域高分辨率的重力场模型。所建模型表示的重力场参量达到了2'×2'的分辨率,对原始的重力异常数据(2'×2')拟合的符合程度达到±0.8×10-5m/s2。结果表明,利用径向基函数方法进行局部重力场建模,避免了球谐函数建模收敛慢的问题,有效提高了模型表示重力场的分辨率。     

基于部分最小二乘岭估计的粗差定值定位

在利用部分最小二乘原理进行粗差定值定位时,模型的法方程矩阵可能存在病态性,使得到的粗差定值定位结果不可靠。文中针对观测数据包含多个粗差且法方程病态问题,利用岭估计处理病态问题,建立部分最小二乘岭估计的粗差定值定位方法,给出粗差搜索步骤,利用迭代算法实现多个粗差的定值和定位。通过模拟算例分析部分最小二乘法、部分最小二乘岭估计在粗差搜索方面的效果,从另一个角度探讨粗差处理方法,推广现有的误差理论,证明文中方法的有效性。