一种新的全球海量地形实时绘制算法

本文为实现全球海量地形数据的实时可视化,提出了一种新算法。算法不使用几何数据而是利用球面特征进行地形多分辨率模型初建,然后基于视锥与节点关系对初建结果进行扩展来得到完整的地形网格。此外设计了能消除具有复杂邻接关系的节点间裂缝的拼接方式,构造了简洁的方法消除GPU32位浮点精度导致的"wob-bling"现象。实现的算法在普通微机上平均漫游速度达每秒95帧以上。     

不同沙源供给条件下砾石床面的风沙流结构与蚀积量变化风洞实验研究

通过对不同沙源供给条件下各种砾石床面的风沙流结构、床面风蚀及堆积沙量变化的风洞实验,结果表明,风沙流结构是判断戈壁风沙流饱和与不饱和的一个重要途径,不同的戈壁风沙流结构对床面输、阻沙特性具有不同的指示意义。近地表0～6 cm高度内的风沙流结构决定了床面的输、阻性质,而6 cm以上的风沙流结构反映了风力对沙物质的输送状况。沙源供给的丰富与否,决定了风沙流的饱和程度,以及风沙流在砾石床面产生的蚀积状况。同等风速条件下,饱和风沙流的输沙率是非饱和风沙流输沙率的2～8倍。在饱和风沙流情形下,床面过程总体以积沙为主,且随风力的增强,床面积沙量急剧增加。在不饱和风沙流情形下,砾石床面总体以风蚀和输送沙物质过程为主,风沙流结构在0～2 cm高度内反映出砾石床面具有明显的阻沙功能,在2～5 cm高度上出现最大输沙值。     

荒漠戈壁下垫面表面动量和感热湍流通量参数化研究

用合理筛选以后的野外观测资料，研究了荒漠戈壁地表湍流通量参数化的问题。首先，分析了Monin-obukhov相似函数的特征，并拟台出了其经验公式。结果表明，风速和温度相似性函数随稳定度参数的变化曲线与典型经验曲线差异较小，并且在经验曲线分布范围以内，但中性时的值有所不同。同时，还用该资料给出了动量和标量粗糙度(感热粗糙度)长度的平均值及其标量粗糙度随摩擦速度的变化关系。发现标量粗糙度的平均值大约比动量粗糙度的小一个量级，并且随摩擦速度的增大而减小，但明显比其理论预测值要大。     

Impact of Grazing Exclusion on the Surface Heat Balance in North Tibet

The grazing exclusion program used by the Tibetan government to protect the ecological environment has changed the vegetation and impacted the surface heat balance in North Tibet. However, little information is available to describe the in?uences of the current grazing exclusion program on local surface heat balance. This study uses the records of fenced grassland patch locations to identify the impact of grazing exclusion on surface heat balance in North Tibet. The records of fenced grassland patch locations, including the longitude, latitude, and elevation of the vertices of each fenced patch (polygon shapes), were provided by the agriculture and animal husbandry bureaus of the counties where the patches were located. ArcGIS 10.2 was used to create polygon shapes based on patch location records. Based on satellite data and the surface heat balance system determined by the model, values for changes in land surface temperature (LST), albedo and evapotranspiration (ET) induced by grazing exclusion were obtained. All of these can influence surface heat balance and alter the fluctuation of LST in the northern Tibetan Plateau. The LST trends for day and night showed an asymmetric diurnal variation, with a larger magnitude of warming in the day than cooling at night. The maximum decrease in absorbed shortwave of LST (-0.5 - -0.4 ℃ per decade) occurred in the central region, while the minimum decrease (-0.2 - -0.1 ℃ per decade) occurred in the eastern region. The decreased latent heat lead to the LST increased maximum (>1 ℃ per decade) occurred in the central region, The eastern region increased at a rate of 0.2-0.5 ℃ per decade, while the minimum increase (0-0.1 ℃ per decade) occurred in the northwestern region.     

渭河流域地表水可利用量分析计算

地表水可利用量是流域和区域水资源规划的重要指标.本文应用断面过流量减去河道内生态需用水量与河道外难控制利用弃水量,并扣除二者间重复计算量的算法,利用华县、状头两个水文站断面实测和统计数据,分析计算渭河多年平均地表水可利用量为54.91亿～66.33亿m~3/a.     

高分五号全谱段光谱成像仪地表温度与发射率反演

地表温度在全球能量平衡和气候变化研究中具有重要意义。中国新一代高分辨率卫星高分五号卫星(GF-5)搭载的全谱段成像光谱仪有4个40 m空间分辨率的热红外波段,可以提供高空间分辨率的地表温度信息。本文提出了适用于全谱段成像光谱仪的温度与发射率分离TES(Temperature and Emissivity Separation)算法同时反演地表温度和发射率,为了提高大气校正精度,算法加入了水汽缩放WVS(Water Vapor Scaling)大气校正方法。首先利用Seebor V5.0全球大气廓线库构建模拟数据对算法精度进行了评价;然后利用张掖地区11景ASTER影像作为替代数据和同步的地面实测数据对算法精度进行了验证。模拟数据结果表明加入WVS方法后TES算法反演地表温度的RMSE由2.59 K降低到1.54 K,4个波段地表发射率的RMSE分别从0.122、0.12、0.102和0.037降低到0.042、0.04、0.028和0.026;地表验证结果表明本文算法反演的地表温度与站点实测值具有更好的一致性,平均Bias由1.08 K降低到0.47 K,RMSE由2.17 K降低到1.7 K;反演的各波段地表发射率与地面实测结果误差均小于1%。因此,本文提出的温度与发射率分离算法具有较高精度,可以利用GF-5数据获取高精度高空间分辨率的地表温度和发射率数据,服务于其他相关研究。     

黑河实验区地表净辐射区域分布及季节变化

利用卫星遥感信息和地面观测资料，分析研究黑河实验区地表净辐射的区域分布及季节变化特征。结果表明，卫星遥感结合地面观测，首先可以得到较为精确的地表反射率和地表温度分布，进而得到较为合理的地表净辐射的区域分布和季节变化特征。     

基于DEM分形特征的坡度尺度变换模型

利用DEM提取坡度具有明显的尺度依赖性,探求DEM在不同尺度下表现出的规律关系,建立多尺度变换模型,以实现不同尺度间的转换是地形分析研究的热点和难点。本文阐释了DEM表面与地表粗糙度分形维数值的地学意义及内在关系,并利用分形对象的自相似性原理,建立了一种基于DEM分形特征的坡度尺度变换模型。选取四川丘陵地区某小流域为研究区,进行坡度尺度变换实验和误差分析,结果表明该模型能有效实现坡度尺度变换:在非平坦地区(坡度>1°)一般重采样方法变换得到的坡度误差为该方法的1.86倍;从信息熵理论分析,经该方法转换后的坡度信息得到了显著恢复。对于无1︰1万及以上精度地形数据的西南山区,利用该方法获取高精度坡度数据具有重要的理论价值和现实意义。     

盆地模拟技术中的化学动力学生烃模型与应用

油气地表化探数据的失真(特别是数据中的高值失真点)直接影响到化探异常圈定。本文根据油气地表化探数据的分布特点，利用概率统计原理，提出一种适合油气化探资料前期处理的失真数据的概率判定方法和处理手段，在对实际资料的应用中，取得了良好的效果。     

Analysis of the contributions of topographic,soil, and vegetation features on the spatial distributions of surface soil moisture in a steep natural forested headwater catchment

Surface soil moisture has been extensively studied for various land uses and landforms. Although many studies have reported potential factors that control surface soil moisture over space or time, the findings have not always been consistent, indicating a need for identification of the main factors. This study focused on the static controls of topographic, soil, and vegetation features on surface soil moisture in a steep natural forested headwater catchment consisting of three hillslope units of a gully area, side slope, and valley‐head slope. Using a simple correlation analysis to investigate the effects of the static factors on surface soil moisture at depths of 0–20 cm at 470 points in 13 surveys, we addressed the characteristics of surface soil moisture and its main controlling factors. The results indicated that the mean of surface soil moisture was in the decreasing order of gully area > valley‐head slope > side slope. The relationship between the mean and standard deviation of surface soil moisture showed a convex‐upward shape in the headwater catchment, a negative curvilinear shape in the gully area, and positive curvilinear shapes at the side and valley‐head slopes. At the headwater catchment and valley‐head slope, positive contributions of soil porosity and negative contributions of slope gradient and saturated hydraulic conductivity were the main controlling factors of surface soil moisture under wetter conditions, whereas positive contributions of topographic wetness index and negative contributions of vegetation density were the main controlling factors of surface soil moisture under drier conditions. At the side slope underlain by fractured bedrocks, only saturated hydraulic conductivity and vegetation density were observed to be the controlling factors. Surface soil moisture in the gully area was mainly affected by runoff rather than were static features. Thus, using hillslope units is effective for approximately estimating the hydrological behaviours of surface moisture on a larger scale, whereas dependency between the main static factors and moisture conditions is helpful for estimating the spatial distributions of surface moisture on a smaller scale.