自动电位滴定仪高效高精度测定海水碱度值

为研究海洋碳循环和海洋碳酸盐系统,需要测定样品的碳酸盐碱度。利用电位滴定仪(万通~(?)798MPT Titrino)配合软件tiamol.1检测了海水总碱度。根据碳酸盐解离常数计算出了海水碳酸盐碱度,相时标准偏差低于0.1%(±2μmol/kg),单个样品用量约25 mL,检测时间约9 min。实验结果表明,用自动电位滴定仪测定海水总碱度速度快,精度高,方法可行。     

地理国情成果用于生态系统服务价值研究

以宁夏大武口区为例,采用谢高地等在《基于单位面积当量因子的生态系统服务价值化方法改进》中的研究结果,对大武口区生态系统服务价值进行了分析,可以作为生态环境保护、生态功能区划、环境经济核算和生态补偿决策的重要依据和基础[1].     

Earthquake response analysis of the Hualien soil–structure interaction system based on updated soil properties using forced vibration test data

This paper presents results of the earthquake response analysis on a large‐scale seismic test (LSST) structure which was built at Hualien in Taiwan for an international cooperative research project. The analysis is carried out using a computer program which has been developed based on axisymmetric finite element method incorporating dynamic infinite elements for far‐field soil region and a substructured wave input technique. The non‐linear behaviour of the soil medium is taken into account using an iterative equivalent linearization procedure. Two sets of the soil and structural properties, namely the unified and the FVT‐correlated models, are utilized as the initial linear values. The unified model was provided by a group of experts in charge of the geotechnical experiments, and the correlated model was obtained through a system identification procedure using the forced vibration test (FVT) results by the present authors. Three components of ground accelerations are artificially generated through an averaging process of the Fourier amplitude spectra of the ground accelerations measured near the test structure, and they are used as the control input motions for the earthquake analysis. It has been found that the earthquake responses predicted using the generated control motions and with the FVT‐correlated model as the initial linear properties in the equivalent linearization procedure compare very well with the observed responses. Copyright © 2001 John Wiley & Sons, Ltd.     

A non-linear numerical model of the tuned liquid damper

The Tuned Liquid Damper (TLD) is modelled numerically as an equivalent tuned mass damper with non-linear stiffness and damping. These parameters are derived from extensive experimental results described in References 1 and 2. This Non-linear Stiffness and Damping (NSD) model captures the behaviour of the TLD system adequately under a variety of loading conditions. In particular, the NSD model incorporates the stiffness hardening property of the TLD under large amplitude excitation. Copyright © 1999 John Wiley & Sons, Ltd.     

Non-monotonic optimal damper placement via steepest direction search

An efficient and systematic procedure is proposed for finding the optimal damper positioning to minimize the dynamic compliance of a 3-D shear building model. The dynamic compliance is expressed in terms of the transfer function amplitudes of the local interstorey drifts evaluated at the undamped fundamental natural frequency. The dynamic compliance is minimized subject to a constraint on the sum of the damping coefficients of added dampers. Optimality criteria are derived and the optimal damper positioning is determined via an original steepest direction search algorithm. This algorithm enables one to find an optimal damper positioning sequentially for gradually increasing damper capacity levels. A non-monotonic design path with respect to the total damper capacity level often appears in the application of this algorithm. A new augmented algorithm via parameter switching is devised to find this non-monotonic design path. Copyright © 1999 John Wiley & Sons, Ltd.     

Stochastic analysis of the linear equivalent response of bridge piers with aseismic devices

The dynamic response of bridge piers with aseismic devices to earthquake excitation is evaluated by the stochastic equivalent linearization technique. The seismic acceleration is schematized through a Gaussian stationary random process. The pier is considered linear elastic, the span is idealized as a rigid mass, the restoring force of the device is represented through a non-linear differential model. The study of the complex modes of the linearized system gives an interpretation of the mechanical behaviour, leads to a formally elementary solution and highlights some phenomena which are typical of the hysteretic systems, particularly of those marked by weak hardening. Even though the solution is limited to the stationary field, it brings out several noteworthy considerations about the effective non stationary behaviour of the structure. Copyright © 1999 John Wiley & Sons, Ltd.     

SOIL–PILE–BRIDGE SEISMIC INTERACTION: KINEMATIC AND INERTIAL EFFECTS. PART I: SOFT SOIL

A substructuring method has been implemented for the seismic analysis of bridge piers founded on vertical piles and pile groups in multi-layered soil. The method reproduces semi-analytically both the kinematic and inertial soil–structure interaction, in a simple realistic way. Vertical S-wave propagation and the pile-to-pile interplay are treated with sufficient rigor, within the realm of equivalent-linear soil behaviour, while a variety of support conditions of the bridge deck on the pier can be studied with the method. Analyses are performed in both frequency and time domains, with the excitation specified at the surface of the outcropping (‘elastic’) rock. A parameter study explores the role of soil–structure interaction by elucidating, for typical bridge piers founded on soft soil, the key phenomena and parameters associated with the interplay between seismic excitation, soil profile, pile–foundation, and superstructure. Results illustrate the potential errors from ignoring: (i) the radiation damping generated from the oscillating piles, and (ii) the rotational component of motion at the head of the single pile or the pile-group cap. Results are obtained for accelerations of bridge deck and foundation points, as well as for bending moments along the piles. © 1997 by John Wiley & Sons, Ltd.     

SEISMIC TESTING OF A BUILDING STRUCTURE WITH A SEMI-ACTIVE FLUID DAMPER CONTROL SYSTEM

This paper describes shaking table tests of a multi-storey scale-model building structure subjected to seismic excitation and controlled by a semi-active fluid damper control system. The semi-active dampers were installed in the lateral bracing of the structure and the mechanical properties of the dampers were modified according to control algorithms which utilized the measured response of the structure. A simplified time-delay compensation method was developed to account for delays within the control system. The results of the shaking table tests are presented and interpreted and analytical predictions are shown to compare reasonably well with the experimental results. © 1997 John Wiley & Sons, Ltd.     

ENVELOPE OF GREEN'S FUNCTION FOR STRUCTURAL RESPONSE WITH SLIGHTLY DETUNED VIBRATION ABSORBERS

Explicit forms of the modal parameters and the envelope of the Green's function for transient response of main structures equipped with vibration absorbers are derived using a perturbation technique and assuming that the natural frequency of the absorber is slightly detuned from that of the main structure. Applying these perturbation solutions, the influence of the absorber parameters on the dynamic response of main structures is investigated and the ratio of the envelope for the main mass with absorber to that without absorber is constructed to provide insight to evaluate the effectiveness of the absorber to diminish the vibrations of main structures.     

Optimal damping between two adjacent elastic structures

The optimal values for the distribution of passive dampers interconnecting two adjacent structures of different heights are determined. The dampers are selected to minimize the seismic response in the first and second modes of the taller of the two structures. For simplicity, the structures are represented as uniform damped shear beams subjected to a common ground motion. Under certain conditions, apparent damping ratios as high as 12 and 15 per cent can be achieved in the first and second modes of lightly damped structures by the introduction of interconnection dampers. The largest reduction of the response in the first mode is achieved when the taller structure is about twice the height of the second structure. © 1998 John Wiley & Sons, Ltd.