武汉砂土动剪切模量与阻尼比的试验研究

以武汉地铁4号线二期工程越江段饱和砂土为研究对象,通过室内GDS动力三轴试验,较为系统地研究了在单向循环荷载作用下砂土的动剪切模量和阻尼比规律特性及其影响因素。试验结果表明:动剪切模量、阻尼比与动剪应变的关系可以用Hardin-Drnevich双曲线模型进行描述;动剪切模量随动应变的增大而减小,随围压和固结比的增大而增大,而阻尼比的变化规律与动剪切模量相反。从而为工程建筑物的抗震设计提供了重要依据。     

土非线性参数变异性对标准设计谱的影响

岩土工程中存在许多不确定性,建筑物抗震规范设计中的标准设计谱实际代表着一种平均结果,并没有考虑到场地土体非线性参数的变异性。文中采用数值模拟的方法研究了土非线性参数变异性对标准设计谱的影响。给出了考虑土非线性参数变异性的概率设计谱。结果表明,土非线性参数变异性对标准设计谱的影响显著;粘性土和无粘性土的动剪切模量比对标准设计谱的影响决定于土非线性参数的概率水准,同时也取决于概率设计谱的频段;烈度7度、8度和9度下土体动剪切模量比变异性使标准设计谱平台最大变化50%、80%和100%,阻尼比变异性使标准设计谱平台最大变化40%、45%和60%。     

Procedures for calibration of linear models for damage limitation in design of masonry‐infilled RC frames

Recent earthquakes have confirmed the role played by infills in the seismic response of reinforced concrete buildings. The control and limitation of damage to such nonstructural elements is a key issue in performance‐based earthquake engineering. The present work is focused on modeling and analysis of damage to infill panels, and, in particular, it is aimed towards linear analysis procedures for assessing the damage limitation limit state of infilled reinforced concrete frames. First, code provisions on infill modeling and acceptance criteria at the damage limitation limit state are reviewed. Literature contributions on damage to unreinforced masonry infill panels and corresponding displacement capacity are reported and discussed. Two procedures are then proposed aiming at a twofold goal: (i) the determination of ‘equivalent’ interstory drift ratio limits for a bare frame model and (ii) the estimation of the stiffness of equivalent struts representing infill walls in a linear model. These two quantities are determined such that a linear model ensures a reliable estimation of seismic capacity at the damage limitation limit state, providing the same intensity level as that obtained from nonlinear analyses carried out on structural models with infills. Finally, the proposed procedures are applied to four‐story and eight‐story case study‐infilled frames, designed for seismic loads according to current technical codes. The results of these application examples are presented and discussed. Copyright © 2016 John Wiley & Sons, Ltd.     

Discussion of ‘Modelling viscous damping in nonlinear response history analysis of buildings for earthquake excitation’ by Anil K. Chopra and Frank McKenna

This discussion deals with recommendations in the paper on appropriate damping formulations for use in nonlinear response history analysis of buildings. Concern over potentially excessive damping forces and moments should extend beyond the damping moments produced by the stiffness proportional part of Rayleigh damping that corresponds to rotational springs used to explicitly model plastic hinges. The key to an appropriate damping formulation for nonlinear analysis is a realistic mechanism that allows all damping forces and moments to be meaningfully assessed. Then features can be added to keep these forces and moments within reasonable bounds. Copyright © 2016 John Wiley & Sons, Ltd.     

瑞利阻尼对砂土场地非线性地震响应的影响分析

在地震荷载作用下,自由场地会产生土体侧向变形和地表响应放大现象。由于土体的高度非线性,计算自由场地地震响应时,不同的阻尼比及剪切模量取值是造成其计算结果与试验结果相差较大的原因之一。目前动力计算常采用瑞利阻尼方法,其系数取值会在一定程度上影响计算结果。选用两模态简化瑞利阻尼系数计算方法,分析土体阻尼比及控制频率的取值对计算结果的影响,对比离心机模型试验,利用开源有限元平台OpenSees,采用适合于土体动力分析的多屈服面本构模型(PDMY),建立剪切梁模型模拟三维自由场地,并分析瑞利阻尼参数对自由场地地震响应和侧向变形计算结果的影响。结果表明,针对相对密度为60%的Nevada干砂,阻尼比为4%、控制频率比为5时,场地响应计算结果与试验结果较为符合。综合分析显示场地非线性响应时域计算时,应特别注意选用的瑞利阻尼参数值。     

Numerically based proposals for the stiffness and strength of masonry infills with openings in reinforced concrete frames

Aimed at investigating the effect of openings on the in‐plane behaviour of masonry infills in reinforced concrete frames, a parametric study is presented based on model calibration via experimental tests. Two types of openings are investigated: central window openings and different combinations of door and window openings based on the typologies of southern European countries. First, a finite element model of the structure is made using the DIANA software program. Then, after calibration with experimental results, a parametric analysis is carried out to investigate the effect of the presence and location of the different types of openings on the in‐plane behaviour of the infilled frame. Finally, different equations for predicting the initial stiffness and lateral strength of infilled frames with any types of openings were obtained. An α factor related to the geometry of the piers between openings is proposed to take into account the location of the openings in the developed equations. Subsequently, the masonry infill panel is replaced by a diagonal strut. An empirical equation is also proposed for the width of an equivalent strut to replace a masonry infill panel with openings in such a way that they possess the same initial stiffness. Copyright © 2015 John Wiley & Sons, Ltd.     

Soil–pile–structure interaction: experimental outcomes from shaking table tests

An effective way to study the complex seismic soil‐structure interaction phenomena is to investigate the response of physical scaled models in 1‐g or n‐g laboratory devices. The outcomes of an extensive experimental campaign carried out on scaled models by means of the shaking table of the Bristol Laboratory for Advanced Dynamics Engineering, University of Bristol, UK, are discussed in the present paper. The experimental model comprises an oscillator connected to a single or a group of piles embedded in a bi‐layer deposit. Different pile head conditions, that is free head and fixed head, several dynamic properties of the structure, including different masses at the top of the single degree of freedom system, excited by various input motions, e.g. white noise, sinedwells and natural earthquake strong motions recorded in Italy, have been tested. In the present work, the modal dynamic response of the soil–pile–structure system is assessed in terms of period elongation and system damping ratio. Furthermore, the effects of oscillator mass and pile head conditions on soil–pile response have been highlighted, when the harmonic input motions are considered. Copyright © 2015 John Wiley & Sons, Ltd.     

基于节理网络有限元的柱状节理岩体等效变形模量结构效应研究

因其特殊的地质成因,柱状节理成为一种具有强烈非连续性及各向异性的特殊岩体结构。以白鹤滩水电工程设计、建设中所遇到的柱状节理玄武岩体为背景,针对柱状节理岩体的等效变形模量问题,在探讨了其结构效应表征参数的基础上,利用节理网络有限元为工具,研究各结构效应表征参数对柱状节理岩体等效变形模量的影响。研究结果表明：在柱轴线横向平面上,对于柱体不规则程度,当柱体完全不规则相对于完全规则情况,等效模量提高大约10%左右;在其他条件不变情况下,当柱体平均边长从0.1 m增加至0.5 m时,等效模量从5.36 GPa增加至23.4 GPa;对不同加载方向的研究结果表明,柱状节理在柱轴横向平面上可以视作各向同性;当节理刚度线性递增时,相应的岩体等效模量也基本符合线性递增的规律。在平行柱体轴线平面,节理组2间距越大,柱状节理岩体的等效变形模量越大;随着错距比的增加,柱状节理岩体的等效变形模量呈现先增加后减少的趋势,当错距比为50%时,节理岩体的等效变形模量取最大值;对于节理刚度的影响,与柱轴横向平面类似的,随柱体轴线平面上节理刚度的线性增加,相应的岩体模量也基本符合线性递增的规律。该研究成果与已有的现场研究成果及三维数值模型成果相比,吻合良好。说明了文中提供的研究结论具有较好的可信度及参考价值。     

非饱和土增湿变形的实用计算方法

非饱和土力学研究目前还未进入实用阶段,主要原因在于吸力量测困难。本文提出了用等效吸力代替真实吸力的试验方法。首先以常规静三轴试验得到的原状饱和土以及非饱和土的应力-应变曲线为基础,根据变形等效的原则确定与某一饱和度相当的围压即为等效吸力;然后建立饱和度与等效吸力之间的非线性关系,并验证了该数学公式的正确性;再根据试验结果分析含水量对非饱和土强度的影响,建立了非饱和土的实用抗剪强度公式;最后按照邓肯-张模型的参数整理方法得到了不同饱和度非饱和土的模型参数,探索这些参数随饱和度的变化规律,建立了引入饱和度的非饱和黄土实用非线性模型,并进行了降雨入渗情况下非饱和土增湿变形的计算。结果表明,饱和度最大值为95%,等效吸力最大值为160 kPa,最大水平位移与竖向位移分别为0.6 cm和20.0 cm,均出现在浸水位置。计算结果合理地反映了非饱和土变形的分布趋势,验证了方法的合理性。