Nonlinear response estimates of RC frames using linear analysis of SDOF systems

An approximate‐simple method for nonlinear response estimates of reinforced concrete frames subjected to near‐field and far‐field records is presented in this paper. The approximate method is based on equivalent single‐degree‐of‐freedom and linear multi‐degree‐of‐freedom models. In this procedure, the nonlinear maximum roof displacement is estimated using an effective period factor and elastic response spectrum with an equivalent damping. The effective period factor was proposed for far‐field and near‐field ground motion records. For regions of high seismicity, the maximum roof displacement can be estimated by applying an effective period factor of 2.3 and 2.1 for near‐field and far‐field records, respectively, and 9% damped displacement response spectrum. For regions of moderate seismicity, a lower effective period factor of 1.9 and 1.8, for near‐field and far‐field records, respectively, can be applied to estimate the maximum roof displacement. A relationship between linear and nonlinear response of multi‐degree‐of‐freedom systems was also proposed to obtain estimates of the maximum inter‐story drift of nonlinear responding reinforced concrete frames. In addition, the effects of number of ground motion records used in the analyses on the scatters of results were investigated. The required number of ground motions to produce a reliable response was proposed. Copyright © 2013 John Wiley & Sons, Ltd.     

Development and validation of nonlinear computational models of dispersed structures under strong earthquake excitation

Structural health monitoring of large multispan flexible bridges is particularly important because of their important role in civil infrastructure and transportation systems. In this study, the response of the Yokohama Bay Bridge (YBB), a three‐span cable‐stayed bridge, to the 2011 Great East Japan Earthquake is used to perform multi‐input multi‐output system identification studies. The extensive multicomponent measurements are also used to develop and validate data‐driven nonlinear mathematical models that can predict the response of YBB to various earthquake records and can accurately estimate its damping characteristics when the system is driven into the nonlinear response range. A combination of least‐square (parametric) and neural network (nonparametric) approaches is used to develop the mathematical models, along with time‐marching techniques for dynamic response calculations. It is shown that the nonlinear mathematical models perform better than the equivalent linear models, both for response prediction and damping estimation. The importance of having an accurate approach for quantifying the damping due to the variety of nonlinear features in the YBB response is shown. This study demonstrates the significance of constructing robust mathematical models that can capture the correct physics of the underlying system and that can be used for computational purposes to augment experimental studies. Given the lack of suitable data sets for full‐scale structures under extreme loads, the availability of the long‐duration measurements from the 2011 Great East Japan Earthquake and its many strong aftershocks provides an excellent opportunity to perform the analyses presented in this study. Copyright © 2013 John Wiley & Sons, Ltd.     

Seismic shear distribution among interconnected cantilever walls of different lengths

Mid‐rise to high‐rise buildings in seismic areas are often braced by slender reinforced concrete (RC) walls, which are interconnected by RC floor diaphragms. In design, it is typically assumed that the lateral forces are distributed in proportion to the wall's elastic stiffness. Pushover analyses of systems comprising walls of different lengths have, however, shown that large compatibility forces can develop between them, which should be considered in design, but the analyses have also shown that the magnitude of the computed forces is very sensitive to the modelling assumptions. Using the results of a complex shell element model as benchmark, different simple hand‐calculation methods and inelastic beam element models are assessed and improved to yield reliable estimates of the base shear distribution among the individual walls comprising the interconnected wall system. Copyright © 2014 John Wiley & Sons, Ltd.     

泉州盆地地震效应特征的一维等效线性和二维非线性分析的比较

采用等效线性动粘弹性模型描述土的动力非线性特性,基于一维等效线性波传法,对泉州盆地地震效应进行了分析;同时,采用修正Martin-Seed-Davidenkov动粘弹塑性模型描述土的动力非线性特性,对泉州盆地非线性地震效应进行了大尺度二维精细化有限元分析,研究了地形地貌和土层横向不均匀性对地震效应的影响。将两种分析结果进行对比,结果表明：①随着基岩输入地震动强度增大,地表峰值加速度PGA放大效应总体呈现减小趋势,中震与小震、大震与小震的地表PGA放大系数之比依次为0.83~0.99、0.72~0.97;②该盆地Ⅲ类场地处,基岩、地表起伏不大,且土层横向分布较均匀,两种方法计算得到的地震效应特征类似;基岩或地表起伏剧烈、土层横向分布明显不均匀的Ⅱ类场地上,二维非线性分析给出的地表PGA放大系数明显大于一维等效线性结果,两种方法得到的地表加速度反应谱及PGA随土层深度的变化特征存在显著差异,二维非线性分析给出的地表加速度反应谱大多呈现双峰甚至多峰现象,且PGA在土层特定深度处存在聚集效应,使PGA随土层深度的变化呈现非单调性。     

不同地区黄土阻尼比变化特性试验研究

通过兰州、洛川、杨凌地区黄土在不同条件下的动扭剪三轴试验,研究了黄土阻尼比滞回圈形状变化的基本特性以及黄土阻尼比在不同固结压力、不同含水率条件下的变化规律。结果表明,黄土阻尼比滞回圈形状受动剪应变、含水率影响较明显;黄土阻尼比受一般的固结作用的影响并不大,但受含水率的影响较明显。根据含水率的不同,按照半对数坐标中的直线方程,分别给出了兰州、洛川、杨凌地区黄土阻尼比在不同固结压力下的拟合结果,并对拟合结果进行了对比分析;在此基础上,进一步对该三个地区黄土的阻尼比进行了汇总拟合,为西北相近地区黄土在中、大应变条件下的阻尼比取值提供了参考。     

Efficient analysis of pile-group effect on seismic stiffness and strength design of buildings

A new efficient method is developed for the analysis of pile-group effects on the seismic stiffness and strength design of buildings with pile foundations. An efficient continuum model consisting of a dynamic Winkler-type soil element and a pile is used to express the dynamic behavior of the structure-pile-soil system with only a small numerical error. The pile-group effect is taken into account through the influence coefficients among piles which are defined for interstory drifts and pile-head bending moments. It is shown that, while the pile-group effect reduces the interstory drift of buildings in general, it may increase the bending moment of piles at the head. This means that the treatment without the pile-group effect results in the conservative design for super-structures and requires a revised member design for piles.     

Effect of soil interaction on the performance of liquid column dampers for seismic applications

The effects of soil–structure interaction (SSI) while designing the liquid column damper (LCD) for seismic vibration control of structures have been presented in this study. The formulation for the input–output relation of a flexible‐base structure with attached LCD has been presented. The superstructure has been modelled by a single‐degree‐of‐freedom (SDOF) system. The non‐linearity in the orifice damping of the LCD has been replaced by equivalent linear viscous damping by using equivalent linearization technique. The force–deformation relationships and damping characteristics of the foundation have been described by complex valued impedance functions. Through a numerical stochastic study in the frequency domain, the various aspects of SSI on the functioning of the LCD have been illustrated. A simpler approach for studying the LCD performance considering SSI, using an equivalent SDOF model for the soil–structure system available in literature by Wolf (Dynamic Soil–Structure Interaction. International Series in Civil Engineering and Engineering Mechanics. Prentice‐Hall: Englewood Cliffs, NJ, 1985) has also been presented. Copyright © 2005 John Wiley & Sons, Ltd.     

改进的等效半空间法及瑞雷波频散曲线反演

层状模型的理论频散曲线表明,层状模型表面瑞雷波同一频率对应的相速度具有多值特点,这就是所谓的瑞雷波多阶性. 面波的多阶性导致了实测频散曲线的复杂性,当地层中存在软弱夹层时这一问题尤为突出,从而给实测频散曲线的解释带来了困难. 本文从工程实用的角度出发,根据等效半空间理论,提出了一种计算理论频散曲线的新算法——改进的等效半空间法,避开了面波多阶性这一复杂问题. 由此方法计算得到的面波相速度并不同于某个具体阶数的面波,而是对多阶面波的综合反映. 按照改进的等效半空间法编制了拟合反演程序,并在工程中进行了运用,取得较好的效果.     

基于随机振动理论确定桥梁地震碰撞的临界间隙

确定梁桥邻跨间避免地震碰撞的最小间隙,对于梁桥地震碰撞危险性预测及防地震碰撞措施的设计有着显著意义。本文基于随机振动理论建立梁桥地震碰撞邻跨临界间隙的计算方法,分析模型采用跨径不等的两跨简支梁桥,且考虑隔震支座非线性恢复力的影响。文中首先建立了系统的非线性运动方程;随后运用随机等效线性化理论将其线性化;最后在复模态空间推导了临界碰撞间隙的均值与方差的计算方法。人工地震动的非线性时程分析结果验证了本文算法的正确性。参数分析表明,临界间隙随邻跨长度比增大而增大,随支座屈服力与上部结构重量比值减小而增大,随隔震支座屈服位移增大而增大,随桥墩振动周期增大而增大。隔震支座屈服前后刚度比值对临界间隙大小影响很小。     

基于能力谱法的SSI体系抗震pushover分析方法

本文首先经过2次等效将土与结构相互作用的多自由度体系等效为单自由度体系,并给出了修正反应谱和等价能力谱的确定方法,进而提出了基于能力谱法考虑土与结构动力相互作用(SSI)效应的结构体系pushover分析方法(SSIPA);然后对3种不同高度考虑SSI效应的结构体系在5条地震动作用下采用本文提出的方法进行了算例分析,将结果与非线性时程分析的结果进行了比较,研究了本方法的适用性和准确性;最后,与建筑抗震设计规范的设计反应谱相结合,对9层考虑SSI效应的钢结构用本文提出的方法进行了弹塑性地震反应分析,根据我国抗震设计规范的规定进行抗震性能的评估验证了本方法的可行性。