Environmental Investigation and Evaluation of Land Subsidence in the Datong Coalfield Based on InSAR Technology

Heavy mining of Jurassic and Carboniferous horizontal coal seams in the Datong coalfield has seriously affected the local geological environment, which is mainly manifested by such geohazards as soil avalanches, landslides, mudflows, surface subsidence, surface cracks, surface solid waste accumulation and surface deformation. More seriously, coal mining causes groundwater to leak. Overpumping of groundwater has resulted in substantial land subsidence of the urban area in Datong City. Based on the previous geo-environmental investigation in the work area, the authors used radar remote sensing techniques such as InSAR （synthetic aperture radar interferometry） and D-InSAR （differential synthetic aperture radar interferometry）, supplemented by the optical remote sensing method, for geo-environmental investigation to ascertain the geo-environmental background of the Datong Jurassic and Carboniferous-Permian coalfield and evaluate the effects of the geohazards, thus providing a basis for the geo-environmental protection, geohazard control and prevention, land improvement and optimization of the human environment. In this study 8 cog-nominal ERS-1/2 SAR data frames during 1992 to 2003 were used, but the following processing was made： （1） the multitemporal SAR magnitude images were used to interpret the geological structure, vegetation, microgeomorphology and drainage system; （2） the multi-temporal InSAR coherent images were used to make a classification of surface features and evaluate the coherence change due to coal mining; and （3） the multi-temporal cog-nominal SAR images were used to complete D-InSAR processing to remove the information of differential deformation areas （sites）. In the end, a ten-year time series of differential interferograms were obtained using the multi-temporal cog-nominal SAR images. In the tests, 84 deformed areas （sites） were obtained, belonging to those in 1993-1996, 1996-1997, 1997-1998, 1998-2001, 1998-2002 and 2001-2003 respectively. Of the 84 areas, 44 are m     

GPS应用于高空施工机械安全监控

结合小湾水电站建设施工情况,利用实地采集的GPS定位数据,探讨使用GPS实时动态定位技术构建高空施工机械安全监控系统的实现原理和可行性,同时介绍构成系统的各个模块及其功能,给出有效地实施高空施工机械安全运行监控的实用方法。     

基于权变理论的滑坡灾害监测预报思路探讨

文章简要评述了地质灾害基础理论与应用技术发展现状、滑坡灾害多种监测预报判据的利弊。利用综合信息处理决策方法,提出了基于权变理论的滑坡灾害监测预报新思路。分析了滑坡成灾的权变特征、环境因素和决策因素,建立了滑坡灾害预报决策概念模型。进一步探讨了在预报决策中应遵循的动态性及满意性原则,为提高地质灾害监测预报理论的科学性提供了新的理论依据与技术途径。     

Bringing GPS into harsh environments for fully automated deformation monitoring

Engineering projects that require deformation monitoring frequently utilize geodetic sensors to measure displacements of target points located in the deformation zone. In situations where control stations and targets are separated by a kilometer or more, GPS can offer higher precision position updates at more frequent intervals than can normally be achieved using total station technology. For large-scale deformation projects requiring the highest precision, it is therefore advisable to use a combination of the two sensors. In response to the need for high precision, continuous GPS position updates in harsh deformation monitoring environments, a software has been developed that employs triple-differenced carrier-phase measurements in a delayed-state Kalman filter. Two data sets were analyzed to test the capabilities of the software. In the first test, a GPS antenna was displaced using a translation stage to mimic slow deformation. In the second test, data collected at a large open pit mine were processed. It was shown that the delayed-state Kalman filter developed could detect millimeter-level displacements of a GPS antenna. The actual precision attained depends upon the amount of process noise infused at each epoch to accommodate the antenna displacements. Higher process noise values result in quicker detection times, but at the same time increase the noise in the solutions. A slow, 25 mm displacement was detected within 30 min of the full displacement with sigma values in E, N and U of ±10 mm or better. The same displacement could also be detected in less than 5 h with sigma values in E, N and U of ±5 mm or better. The software works best for detecting long period deformations (e.g., 20 mm per day or less) for which sigma values of 1–2 mm are attained in all three solution components. It was also shown that the triple-differenced carrier-phase observation can be used to significantly reduce the effects of residual tropospheric delay that would normally plague double-differenced observations in harsh GPS environments.

山东郓城矿井建设项目环境经济损益分析

建设项目环境影响评价中的环境经济损益分析部分,目前多是定性的简单分析,不能满足环境影响评价精度要求。本文对山东里能集团有限公司巨野矿区郓城矿井环境影响评价时,探讨了定量化的环境经济损益分析。     

煤炭资源开发破坏和占用土地遥感监测研究

煤炭资源开发引发地面塌陷造成的土地破坏和矿山开发占用大量土地资源,已严重危及日益紧缺的土地资源和区域可持续发展。本文主要利用高分辨率遥感图象对煤炭资源开发过程中破坏和占用土地监测的方法和效果进行研究。     

测绘外业车辆监控管理系统的建设与研究

通过分析现有车辆监控系统及其应用,介绍了如何进行测绘外业车辆监控管理系统的建设。从技术上采用WebGIS与GPS相结合,以B/S结构进行开发建设,实现了基于WebGPS(基于网络形式的地理信息系统,集成GPS技术的监控系统)的车辆监控与管理系统并通过了应用的检验,为监控应用提供了新思路和新手段。     

工程建筑物变形监测方案设计及应用

首先介绍了工程建筑物变形监测的基本原理,并在此基础上详细阐述了工程建筑物沉降变形监测的方案设计过程,最后通过一个工程应用实例验证该方案设计的合理性与可行性。     

南京某深基坑边坡支护设计与施工

南京某深基坑周边环境较为复杂,地下水丰富,基坑开挖较深,最深处达13m。根据周边环境的情况和开挖的深度,采用了钻孔灌注桩和土钉锚杆相结合的支护形式。分析了该基坑施工的技术要点,通过监测结果,说明该支护方案是可行的。     

四川眉山芒硝矿主要环境地质问题与防治对策

眉山市芒硝矿开采和生产过程中的主要环境地质问题是矿区地下水和地表水疏干、污染及矿区土壤污染等,影响了矿山及附近居民的生产生活,威胁了人民的身体健康。本文在芒硝矿山环境地质问题调查的基础上,针对存在的主要问题,提出了防治措施。