科尔沁沙地土地利用与耕作方式对土壤风蚀的影响

土壤风蚀造成的直接生态后果是土地资源的退化。在春播前两次沙尘暴事件中,对科尔沁沙地几种具有代表性的土地类型的土壤风蚀量及土壤特性进行了野外测定、分析,结果表明:(1)在同一沙尘暴天气下,由于土地利用和耕作方式的不同,土壤风蚀量存在着差异,新垦农地和翻耕农地的风蚀量显著高于未垦草地、免耕农地和麻黄地;免耕农地则与未垦草地的风蚀量相差不大,风蚀危害较轻;麻黄地几乎不受风蚀侵害。新垦农地、翻耕农地、免耕农地、未垦草地、麻黄地两次观测的土壤风蚀量平均值依次为24.59、15.60、2.26、1.46和0.22 g/h.cm2。(2)基于土壤特性计算的土壤退化指数结果表明,新垦农地和翻耕农地发生了较为严重的退化。     

Initiation and development of pull-apart basins with Riedel shear mechanism: insights from scaled clay experiments

Typical pull-apart structures were created in scaled clay experiments with a pure strike-slip geometry (Riedel type experiments). A clay slab represents the sedimentary cover above a strike-slip fault in the rigid basement. At an early stage of the development of the deformation zone, synthetic shear fractures (Riedel shears) within the clay slab display dilatational behaviour. With increasing basal displacement the Riedel shears rotate and open further, developing into long, narrow and deep troughs. The shear displacement and the low angle with the prescribed principal basal fault set them apart from tension gashes. At a more evolved stage, synthetic segments (Y-shears) parallel to the basal principal fault develop and accommodate progressive strike-slip deformation. The Y-shears connect the tips of adjacent troughs developed from the earlier Riedel shears, resulting in the typical rhomb-shaped structures characteristic for pull-apart basins. The Strait of Sicily rift zone, with major strike-slip systems being active from the Miocene to the Present, comprises pull-apart basins at different length scales, for which the structural record suggests development by a mechanism similar to that observed in our experiments.     

Evaluation of three waterborne polymers as stabilizers for sandy soil

This study reports on waterborne polymer emulsion systems that were used for structural modification of sandy soils. The first emulsion used was a styrene-acrylic, copolymer emulsion; the second and third were vinyl-acrylic, copolymer-based emulsions. Specimens were prepared by adding different polymer emulsions to the sand and water in prescribed amounts. The performance of the different emulsion systems as sand stabilizers was estimated through measurement of the hydraulic conductivity and compressive strength. Measurements of hydraulic conductivity were conducted in a flexible membrane test apparatus. The hydraulic conductivity for the three emulsions decreased at different rates, with an increase in polymer content up to 3 wt. (i.e., % by weight). Additional increase of polymer content did not introduce significant decrease in hydraulic conductivity, and, at 5 wt.%, the three emulsions had essentially the same effect. Measurements made on dry cylindrical specimens disclosed remarkable enhancement in the mechanical behavior of the system. The compressive strength and modulus of elasticity of the examined emulsions increased with a higher concentration of polymer. Scanning electron microscope (SEM) revealed that the reduction in the permeability and the improved mechanical properties can be attributed to three dominant structural changes: the development of interconnecting ties between the sand particles, the development of adhesion between neighboring sand particles in contact, and the covering of the sand particles with a thin polymer film.     

皖中泥质岩工程性质探讨

历来对半胶结泥质岩风化等级划分都带有许多主观性,从而影响提承载力,有的规范要求可不对半胶结岩石进行风化程度划分,但有时要对这些岩石进行工程地质细分,从而准确确定各分层的承载力与摩阻力。统计了合肥、六安、淮南、安庆地区等大量实践资料,用标准贯入击数、重型圆锥触探实验击数等原位测试手段来划分泥质岩风化等级,并对泥质岩的承载力与摩阻力等工程地质性质做出了评价。     

QTPV Data Model and Algorithm and Its Application to Geological Exploration Engineering

3D spatial data model and simulating are the core of 3D GIS can be adopted in different domains. A data model based on Quasi Tri-Prism Volume (QTPV) has been proposed. QTPV definition and its special cases have been discussed. Using QTPV and its special cases, irregular natural geological bodies and regular subsurface engineering can be described efficiently. The proposed model is composed of five primitives and six objects. Data structures and topological relationship of the fives primitives and three objects describing stratigraphy are designed in detail Some schemes are designed for the QTPV modelling of stratigraphy and subsurface engineering according to modelling data. The model manipulation method of QTPV cutting by an arbitrary plane is discussed. Using VC 6.0 programming language integrated with SQL database and OpenGL graphic library under windows environment, a system prototype 3DGeoMV has been developed. The experiment result shows that the QTPV model is feasible and efficient in modelling subsurface engineering.     

人为土的概念、特征及其工程研究意义

本文提出了人为土的工程概念,从其成因的角度给出了人为土明确的科学定义,归纳和总结了人为土的基本特征,为人为土的工程分类体系建立、合理评价、工程利用和环境整治提供科学依据。     

直升机载频率域电磁系统在我国环境和工程勘查中的应用前景

本文根据国际上采用直升机载频率域电磁系统进行环境和工程勘查的应用效果,结合我国引进的航空电磁系统的性能和特点,探讨了采用直升机载频率域电磁系统在我国进行环境和工程勘查的应用前景。     

滑坡及危岩(崩塌)防治工程措施选择与工程设置

滑坡和危岩（崩塌）治理工程措施较多，措施组合可变性大，每种工程措施都有其相应的应用条件，不宜性、适宜性和最佳配置组合。治理工程措施选择应充分考虑治理工程功能性的具体要求、在不同工况条件下的安全性及耐久性、工期要求和投资的经济性以及后期维护的要求、工程岩土体性质及其蓄水后的变化、场地条件、施工技术条件、地方材料资源等具体制约因素以及环境保护的要求。在三峡水库区二期地质灾害防治工程国家级验收总结的基础上，对滑坡与危岩（崩塌）常用防治工程措施（排水、削方减载、回填压脚、抗滑桩、重力式抗滑挡墙、预应力锚索、格构锚固、拦石墙等）的工程适用条件、工程设置及不宜性进行了详细的分析，并提出工程设置应考虑及注意的问题。     

浅析混凝土质量通病防治的措施

在混凝土工程施工时，经常会发现诸如蜂窝、麻面、孔洞、露筋、缝隙、夹层、缺棱掉角、表面不平整。混凝土强度不够，均质性差等质量通病。在分析产生混凝土施工质量问题原因的基础上，有针对性地提出了各种防治措施。     

加强工程施工项目管理措施与建议

结合项目施工管理的经验,从建立项目管理班子、项目评估和合同评审签订、人力资源的优化配置、强化劳务管理、责任成本管理、建立激励约束机制六个方面来探讨加强工程项目管理办法,并同时提出了加强工程项目管理的具体措施与建议.