Full-range nonlinear analysis of fatigue behaviors of reinforced concrete structures by finite element method

Ｆｕｌｌ－ｒａｎｇｅｎｏｎｌｉｎｅａｒａｎａｌｙｓｉｓｏｆｆａｔｉｇｕｅｂｅｈａｖｉｏｒｓｏｆｒｅｉｎｆｏｒｃｅｄｃｏｎｃｒｅｔｅｓｔｒｕｃｔｕｒｅｓｂｙｆｉｎｉｔｅｅｌｅｍｅｎｔｍｅｔｈｏｄ￥ＳｏｎｇＹｕｐｕ；ＺｈａｏＳｈｕｎｂｏ；ＷａｎｇＲｕｉｍ...     

标志沉积层磁组构特征及其古环境意义研究

通过对长江三角洲及其邻近区域埋藏古土壤、潮坪、长江下游河道浸滩、舟山滨岸风成沙丘、南京黄土古土壤序列沉积体的磁组构测量统计分析，取得了各自的标志特征。该２特征揭示出，舟山滨岸风成沙丘与南京黄土吉土壤序列沉积的搬运介质能量位相基本一致，其物源来向却显示出巨大差异；上述两类沉积体与上述现今潮坪、河道漫滩沉积体地搬运介质能量位相及物源来向均显示出绝然不同的标志特征。然而浸滩物源来民南京黄土的物尖兵为向却     

Numerical Analysis of Wave Forces on Arbitrarily Shaped Multi-Pillars Over Varying Topography

The modified hybrid element method (MHEM) is utilized to predict and analyze wave forces on arbitrarily shaped multiple bodies. This method can be applied to waves of all water depths, i. e. shallow, intermediate, and deep waters, on slowly varying seabed. The MHEM employs the ICCG method to save CPU and storage, thus the computation of wave forces for large multi-body systems can be carried out on microcomputers. Numerical results of the present method are compared with experimental data and other solutions. It is shown that the MHEM provides more accurate solutions of the wave forces than other numerical methods do. Therefore, the methodology presented herein can be used in the design of coastal and ocean structures.     

Dynamic Analysis of a Single-Column Platform (II)

This paper describes the study of a single-column structure used as well-head platform. In order to check the reliability of computation theory and programme, model tests have been carried out. The paper introduces the conclusion of tests and the dynamic properties of single-column platform are obtained.     

Elasto-Plastic Analysis of Tubular Joints of Offshore Platforms by Finite Element Method

The plastic node method is reformulated by the variational principle and is applied to elasto-plastic finite element analysis of tubular joints, eventually including the effect of internal and external gussets, stiffener rings, etc., if necessary. Four different joints are studied here in detail for the elasto-plastic behavior, the strain at the hot spot, the strain concentration factor around the intersection line, and the propagation of the plastic region with loading up to collapse in order to determine the ultimate strength, safety factor, and development of the plastic field. The present results are in good agreement with the experimental results.     

引入差比关系法分析西北太平洋TOPEX/POSEIDON卫星高度计测高数据

TOPEX/POSEIDON(T/P)卫星高度计数据信息中存在周期成分混淆问题.对其中的一类混淆引入差比关系方法对混淆的分潮进行分离.卫星轨道交叉点资料包括升轨和降轨资料,资料量比沿轨点资料多1倍,经分析发现:在已有为期6a多的观测资料时间序列中,在沿轨处混淆的分潮如K₁和SSA在交叉点处不再混淆,可以直接分离.因此首先对交叉点资料进行调和分析.然后由交叉点的分析结果得到分潮间的差比关系,处理到相近的沿轨点处,从而得到沿轨点的调和常数.用引入差比关系方法,对西北太平洋海区6a多的T/P卫星高度计资料进行了潮汐分析,并与沿岸及岛屿验潮站资料进行了比较,所得结果较满意.     

Computation of Viscous Uniform and Shear Flow over A Circular Cylinder by A Finite Element Method

The incompressible viscous uniform and shear flow past a circular cylinder is studied. The two-dimensional Navier-Stokes equations are solved by a finite element method. The governing equations are discretized by a weighted residual method in space. The stable three-step scheme is applied to the momentum equations in the time integration. The numerical model is firstly applied to the computation of the lid-driven cavity flow for its validation. The computed results agree well with the measured data and other numerical results. Then, it is used to simulate the viscous uniform and shear flow over a circular cylinder for Reynolds numbers from lO0 to lO00. The transient time interval before the vortex shedding occurs is shortened considerably by introduction of artificial perturbation. The computed Strouhal number, drag and lift coefficients agree well with the experimental data. The computation shows that the finite element model can be successfully applied to the viscous flow problem.     

桶形基础平台三维有限元稳定性分析

以我国第一座桶形基础采油平台工程实例为原型，采用三维有限元计算方法对桶形基础稳定性分析。平台在波浪、风等荷载作用下，其稳定性不仅与平台的整体结构有关，而且与桶形基础及其周围土体相互作用相关。在计算中，利用薄层摩擦单元模拟土与结构间的相互作用，取得了很好的效果。分析结果表明桶形基础采油平台在设计条件下运行是较为稳定的。     

Deposition Rates of Terrestrial and Marine Organic Carbon in the Osaka Bay, Seto Inland Sea, Japan, Determined Using Carbon and Nitrogen Stable Isotope Ratios in the Sediment

Carbon and nitrogen stable isotope ratios (¹³C and ¹⁵N) of surface sediments were measured within Osaka Bay, in the Seto Inland Sea in Japan, in order to better understand the sedimentation processes operating on both terrestrial and marine organic matter in the Bay. The ¹³C and ¹⁵N of surface sediments in the estuary of the Yodo River were less than –23 and 5 respectively, but increased in the area up to about 10 km from the river mouth. At greater distances they became constant (giving ¹³C of about –20 and ¹⁵N about 6). It can be concluded that large amounts of terrestrial organic matter exist near the mouth of the Yodo River. Stable isotope ratios in the estuary of the Yodo River within 10 km of the river mouth were useful indicators allowing study of the movement of terrestrial organic matter. Deposition rates for total organic carbon (TOC) and total nitrogen (TN) over the whole of the Bay were estimated to be 63,100 ton C/year and 7,590 ton N/year, respectively. The deposition rate of terrestrial organic carbon was estimated to be 13,200 (range 2,000–21,500) ton C/year for the whole of Osaka Bay, and terrestrial organic carbon was estimated to be about 21% (range 3–34) of the TOC deposition rate. The ratio of the deposition rate of terrestrial organic carbon to the rate inflow of riverine TOC and particulate organic carbon (POC) were estimated to be 19% (range 3–31) and 76% (range 12–100), respectively.     

Assessment of spatial variation in carbon utilization by benthic and pelagic invertebrates in a temperate South African estuary using stable isotope signatures

Stable isotope analyses (δ¹³C and δ¹⁵N) were used to evaluate the spatial variations in carbon flow from primary producers to consumers at two sites in the temperate and permanently open Kariega Estuary on the southeastern coast of South Africa during October 2005 and February 2006. One site was located opposite a salt marsh while the second was upstream of the marsh. Except for significantly enriched δ¹³C values of Zostera capensis and surface sediments near the salt marsh, the δ¹³C and δ¹⁵N signatures of the producers were similar between sites. The invertebrates were clustered into groups roughly corresponding to the predominant feeding modes. The suspension feeders showed δ¹³C values closest to the seston, whereas the deposit feeders, detritivores and scavengers/predators had more enriched δ¹³C values reflecting primary carbon sources that were likely a combination of seston, Spartina maritima and Z. capensis at the upstream site, with an increased influence of benthic algae and Z. capensis at the salt marsh site. The δ¹⁵N signatures of the consumers showed a stepwise continuum rather than distinct levels of fractionation, indicating highly complex trophic linkages and significant dietary overlap among the species. Consumers exhibited significantly enriched δ¹³C values at the salt marsh site, an effect that was attributed to enriched Z. capensis detritus in this region in addition to increased phytoplankton biomass in their diets compared with invertebrates living upstream. The data reinforce the concept that between-site variations in the stable isotope ratios of consumers can result not only from dietary shifts, but also from alterations in the isotope ratios of primary producers.