Second-Order Wave Diffraction Around 3-D Bodies by A Time-Domain Method

A time-domain method is applied to simulate nonlinear wave diffraction around a surface piercing 3-D arbitrary body. The method involves the application of Taylor series expansions and the use of perturbation procedure to establish the corresponding boundary value problems with respect to a time-independent fluid domain. A boundary element method based on B-spline expansion is used to calculate the wave field at each time step, and the free surface boundary condition is satisfied to the second order of wave steepness by a numerical integration in time. An artificial damping layer is adopted on the free surface for the removal of wave reflection from the outer boundary. As an illustration, the method is used to compute the second-order wave forces and run-up on a surface-piercing circular cylinder. The present method is found to be accurate, computationally efficient, and numerically stable.     

等高线自动绘制中断层处理的新方法

提出了一种断层处理新方法——分块法与断层恢复法合成算法，这种方法兼有分块法与断层恢复法的优点同时又克服了其不足，较好地解决了含逆断层时煤层底板等高线自动绘制及任意边界的构网问题，使绘出的等值线图误差较小，更加符合实际。     

Boussinesq-type modelling using an unstructured finite element technique

A model for solving the two-dimensional enhanced Boussinesq equations is presented. The model equations are discretised in space using an unstructured finite element technique. The standard Galerkin method with mixed interpolation is applied. The time discretisation is performed using an explicit three-step Taylor–Galerkin method. The model is extended to the surf and swash zone by inclusion of wave breaking and a moving boundary at the shoreline. Breaking is treated by an existing surface roller model, but a new procedure for the detection of the roller thickness is devised. The model is verified using four test cases and the results are compared with experimental data and results from an existing finite difference Boussinesq model.     

Non-Simultaneous Failure of Ice in Front of Multi-Leg Structures

Because the multi-leg jacket structure is the major type of offshore structures in the Bohai Sea, the study of non-si-multaneous failure of i鏴 on multi-leg structures is important. However, the non-simultaneous failure has not been consid-ered in engineering design until now, obviously resulting in costly design and notable waste. To resolve this problem, this paper, by means of analysis of experimental data, calculates the coefficient of the non-simultaneous failure for the double-pile structure, the square four-leg structure, the single-line multi-pile structure, and the conical structure, respectively, and provides some reference criteria for engineering design.     

海面对风应力的非定常响应

针对常垂直湍流系数和变垂直湍流系数两种情况，给出了开阔静止海面对风应力的非定常响应的解析表达式，并讨论了水深，风应力强弱对响应过程的影响，尽管没有考虑风场的非定常性，但本文的结果对理解海洋对风应力的非定常响应过程具有一定的帮助，对分析海面停风后的消衰过程也具有实际意义。通过与实测资料比较，认为垂直湍流系数模式要比常垂直湍流系数模式更为合理。     

Wave Reflection Caused by Wave Overtopping and Sloping Top of Spructure

In this paper, the theoretical analysis and experimental studies are employed to investigate the reflection characteris-tics of partial standing waves caused by wave overtopping and sloping top of structures. Based on the principle of conser-vation of wave energy flux, the third-order Stokes wave theory is used to formulate the reflection coefficient at wave overtopping; the calculation results are regressed into an applied expression. A series of experiments of wave reflection for a vertical-wall structure with chamfered and overhanging upper sections are carried out to investigate the influence of top slope on wave reflection. The regularity of variation of wave reflection in this case is analysed based on the experimental results.     

台湾海峡1997年8月至1999年8月份海水光学衰减系数的分布特征

利用1997－1999年间8月份台湾海峡的实测资料，分析了海水光学衰减系数的垂直分布类型、水平分布特征。结果表明，台湾海峡海水光学衰减系数的垂直分布类型主要分为5种，大部分随深度而递增；光学衰减系数等值线基本与岸线平行，水平梯度自北向南、自近岸向外海递减，近岸等值线密集，而外海稀疏；影响台湾海峡光学衰减系数的主要因素是县浮物质（主要含浮游生物）和海流运动。     

Hilbert Transferin Applied to Separation of Waves

The analytical method (AM) for separation of composite waves is presented based on the Hilbert transform. It is ap-plicable to both regular and irregular trains of waves. The wave data series measured with two wave gauges in the experi-ments are separated into two series of incident and reflected waves. Then, the reflection coefficient can be easily ob-tained. The arrival of reflected waves can also be detected for improveraent of the accuracy of the reflection coefficient. The reflection performance of the physical model can be estimated exactly without calculation of wave height and phase difference. Numerical samples developed to test the method are proved to be accurate. Physical experiments are conduct-ed and compared with Goda s method and satisfactory results are obtained.     

钝顶螺旋藻C-藻蓝蛋白和多管藻R-藻红蛋白的分离纯化及摩尔消光系数的测定

１９９３年１１月～１９９４年１月用简单的羟基磷灰石柱层析法从多管藻中分 离纯化了Ｒ－藻红蛋白和从钝顶螺旋藻中纯化了Ｃ－藻蓝蛋白，它们的纯度（指可见 光部分的最大吸收与 ２８０ｎｍ处吸收值之比）可分别达到 ６（Ｒ－藻红蛋白）和 ５． ５（Ｃ－ 藻蓝蛋白）。由于不同藻种的同种藻胆蛋白的摩尔消光系数不同，所以应用凯氏定 氮法并结合可见光的吸收值测定了上述两种藻胆蛋白的摩尔消光系数，钝顶螺旋 藻Ｃ－藻蓝蛋白为１．８５３ × １０６ｍｏｌ－１ｃｍ－１（６２０ｎｍ），多管藻Ｒ－藻红蛋白为１．７９６ × １０６ｍｏｌ－１ｃｍ－１（４９８ｎｍ），为藻胆蛋白的浓度测定提供了方便。     

Third order contribution to the wave-making resistance of a ship at finite depth of water

This paper presents a potential based boundary element method for solving a nonlinear free surface flow problem for a ship moving with a uniform speed in finite depth of water. The free surface boundary condition is linearized by the systematic method of perturbation in terms of a small parameter up to third order. The surfaces are discretized into flat quadrilateral elements and the influence coefficients are calculated by Morino's analytical formula. Dawson's upstream finite difference operator is used in order to satisfy the radiation condition. The second order solution gives better result than the first or third order solution. So the present method with the second order solution can be adopted as a powerful tool for the hydrodynamic analysis of the thin ship in finite depth of water.