应用能量色散X荧光衍射仪分析海绵元素组成

通过能量色散X荧光衍射仪（EDXRF）对3种南海潮间带海绵：细薄星芒海绵Stelletta tenui（Lindgren）、澳大利亚厚皮海绵Craniella australiensis （Carter）和多皱软海绵Halichondria hugosa （Ridley＆Dendy）的元素组成和含量进行了研究,并与两种黄海潮间带海绵进行了比较。结果表明,海绵体内的元素组成受种属差异的影响较大,溴元素的含量可能同一定的活性物质产生相关。另外,不同海绵具有骨针形态的多样性,为深入研究内部合成机制提供了材料。     

Penetration response of spudcans in layered sands

The behaviour of spudcan foundations during the installation and preloading in two-layer sand sediments was investigated through large deformation finite element (LDFE) analyses. The LDFE analyses were carried out using the coupled Eulerian-Lagrangian approach, modifying Mohr-Coulomb soil model to capture hardening and subsequent softening effects of sand. Parametric analyses were undertaken varying the top layer thickness, relative density of sand and spudcan diameter. Both loose to medium dense-over-dense and dense-over-loose to medium dense sand deposits were explored. The results showed that, for the investigated relatively thin top layer thickness of ≤ 5 m, spudcan behaviour was dictated by the bottom sand layer with a minimal influence of the top layer. For assessing the penetration resistance profile in two-layer sands, the performance of the ISO, SNAME, InSafeJIP, and other existing theoretical design methods were evaluated.     

Coupled analysis for response and instability of sloping seabed under wave action

Wave-induced instability of seabed may cause damage to coastal and offshore structures. This issue has been investigated mostly for mildly sloping ($<5^{°}$) seabed considering uncoupled or one-way coupled response of wave and seabed interaction. However, some of the marine structures are founded on seabed with steeper slopes. In this study, the wave-induced response and instability of sloping seabed are evaluated using a coupled finite element model. The interaction between fluid and porous seabed accounting for the effect of fluid motion on the seabed response, and conversely the effect of seabed response on the fluid motion (but not on the surface wave profile) is considered. The results indicate that the system response (fluid pressure, stresses, etc.) and the extent of instantaneously liquefied zone within the sloping seabed with significant steepness are lesser than those for horizontal seabed. Moreover, for typical sediment and wave characteristics, for the flat seabed, the response obtained from fully coupled analysis is not significantly different from those obtained by uncoupled analysis. For the sloping bed, such difference is slightly greater as compared to that for the flat bed.     

Behavior of drag anchor in clay with linearly increasing shear strength under unidirectional and combined loading

Drag anchor is a widely used economical anchor option for offshore floating structures. The anchor behavior under unidirectional loading and combined loading is important for anchor selection. The anchor behavior under combined loading, characterized by the yield envelope, can also be used for the prediction of anchor installation, which is still an issue in anchor design. However, most existing studies on anchor capacity are for plate anchors which focused only on the anchor pullout capacity in soil with uniform shear strength. The behavior of drag anchor under unidirectional and combined loading in soil with linearly increasing shear strength profile is seldom investigated. The current 2D finite element studies investigate the anchor behavior for a horizontal anchor fluke in clay with linearly increasing shear strength under unidirectional vertical, horizontal and rotational loadings first. Then based on the results of anchor unidirectional loading behavior, the yield envelopes for anchor under combined loading for both shallow and deep embedded flukes are studied. The effect of anchor embedment depth, soil non- homogeneity, soil overburden pressure and the soil/anchor interface breakaway conditions are studied to provide insight for drag anchor design.     

The effects of blade twist and nacelle shape on the performance of horizontal axis tidal current turbines

The paper presents the effects of blade twist and nacelle shape on the performance of horizontal axis tidal current turbines using both analytical and numerical methods. Firstly, in the hydrodynamic design procedure, the optimal profiles of untwisted and twisted blades and their predicted theoretical turbine performance are obtained using the genetic algorithm method. Although both blade profiles produce desired rated rotational speed, the twisted blade achieves higher power and thrust performance. Secondly, numerical simulation is performed using sliding mesh technique to mimic rotating turbine in ANSYS FLUENT to validate the analytical results. The Reynolds-Averaged Navier-Stokes (RANS) approximation of the turbulence parameters is applied to obtain the flow field around the turbine. It is found that power and axial thrust force from BEMT (Blade Element Momentum Theory) method are under-predicted by 2% and 8% respectively, compared with numerical results. Afterwards, the downstream wake field of the turbine is investigated with two different nacelle shapes. It is found that the rotor performance is not significantly affected by the different nacelle shapes. However, the structural turbulence caused by the conventional nacelle is stronger than that by the NACA-profiled shape, and the former can cause detrimental effect on the performance of the downstream turbines in tidal farms.     

Regional disparities in China's marine economy

Understanding the performance of each coastal area as it develops is the primary task of policy-makers in a marine economy; however, quantitative regional differences in China's marine economy have not been empirically examined. This paper offers a methodological contribution by applying a series of techniques, including the variation coefficient, Gini coefficient, and Theil index decomposition, to illustrate the relative differences among coastal areas. Additionally, the coastal areas of China were divided into two categories to reveal the provincial differences and regional disparities in China's marine economy. The results show that although the numerical economic differences in Gross Ocean Product (GOP) among coastal areas have increased significantly during the 21st century, the gaps among coastal regions have gradually decreased. In addition, China's marine economy presents three levels of regional development (developed, medium-developed, and developing). The results of the Theil index decomposition show that the overall difference in China's marine economy is derived mainly from differences within the three macro marine economic regions; these differences account for more than 95% of the overall difference. Furthermore, the underlying reasons for and driving mechanism of regional differences in China's marine economy can be illuminated in terms of differences in natural resource endowments and geographic locations; industrial agglomeration and diffusion; changes in regional development policy; and foreign investment. These findings offer basic data support and policy recommendations for marine economy management at the national and regional levels.     

Material selection for the gas containment system of a compressed natural gas carrier fleet

In this work, the possible exploitation of fiber-reinforced composites in the context of maritime transportation of compressed natural gas (CNG) is investigated. In addition to a more conventional steel configuration, two different fiber materials, carbon and glass, are considered as construction materials for pressure vessels (PVs) to be stored on board ships, with thickness optimized by FEM analysis.The considered scenario is represented by the transportation of CNG from an offshore well to a terminal on shore. Fleets of ships carrying CNG in pressure vessels manufactured with the investigated materials are generated by means of a ship synthesis model (SSM) software and compared on the basis of technical and economical indicators.The choice of the construction material influences considerably the weight of the PVs, which represent a major item of total ship weight and reflects directly on the general transport performances in terms of resistance, seakeeping and reliability in the service. On the other hand, capital as well as operating expenditures are considerably affected by the choice. When exploring the design space, the ship synthesis model is able, at a preliminary stage of the design, to account for the various technical and economical aspects, their implications and relationships. Results are presented of computations carried out in a specific case, identified by the annual gas production and other characteristics of the well terminal and a cruising route for the ships. The comparison is carried out on the basis of the cost per transported unit of gas and of the percentage of success in the transportation process. The computations show that the choice of the PV material has a key influence on the results in terms of optimal number, dimensions and speed of the ships.     

Time-domain simulation of berthing problem between FPSO and shuttle tanker in waves

A time-domain simulation method based on potential flow model has been developed to investigate the berthing problem between two floating bodies in wave. The boundary value problem is formulated with respect to an earth-fixed coordinate system because the relative positions of the two vessels continuously change during the berthing operation. The classical finite element method is used to solve the Laplace equation in the fluid domain with moving boundary. The linearized free-surface boundary conditions are integrated in time by applying 4th-order Adams–Bashforth–Moulton method. A simple re-mesh algorithm with local and global mesh systems is introduced to update mesh by considering large horizontal movement of the berthing vessel. The developed numerical method is used to investigate the berthing problem between a FPSO and shuttle tanker in waves. The focus is on the wave-induced motion response during the berthing process. The characteristics of the motion responses in berthing operation are examined with various wave frequencies, berthing speeds and wave headings.     

Axial friction response of full-scale pipes in soft clays

The axial friction response of subsea pipelines in soft clays is a very important aspect for designers of subsea pipelines but the response is not well understood so far. There is a pressing need for the comprehension of the response. In this paper, model tests are performed using full-scale pipes coated with polyethylene (PE) to study the effects of the set-up period, the pipe diameter, the buried depth of the pipe, the shear strength of soft clays and the loading rate on the axial friction response of pipelines in soft clays. The variations of the axial friction coefficient are analyzed using the effective stress method based on model test results. The results show that the axial friction resistance increases with the increasing pipe diameter but the effect of the pipe diameter on the axial friction coefficient can be neglected. The ultimate axial resistance also increases with the increase of the buried depth of pipelines, the undrained shear strength of soft clays and the loading rate. The axial friction coefficient increases with the increasing loading rate. However, the axial friction coefficient decreases with the increasing buried depth. The method to determine the axial friction coefficient is developed by analyzing model test results, which considers the effects of the diameter, the buried depth, the undrained shear strength of soft clays and the loading rate. The study results not only extend the industry data base but also supply a basis to determine the axial friction coefficient of PE-coated pipes in soft clays for ocean engineering geological investigations.     

双向直驱式潮流能发电轮机性能实验研究

针对潮流能双向来流的特点及当前潮流能发电轮机的研究现状和存在的问题,提出了一种新型的双向直驱式发电轮机。叶片基本翼型为S型,并对其进行受力分析,得到相应的计算公式,结合叶片翼型厚度和形状约束,求解出各个截面的形状,并三维建模形成一种新型"S"翼型轮机。轮机两端安装具有防水性能的永磁发电机,外侧增设双向导流罩,构成双向直驱式发电轮机装置模型。在水槽实验中,首先找出不同的模拟流速下获取功率的最佳负载阻值,在此基础上收集了转速及功率数据,绘制尖速比-获能系数关系曲线图和流速—获能系数关系曲线图,可以论证尖速比的取值对获取最佳功率的重要性,同时该翼型轮机具有良好的空载启动性能及双向吸收来流的能力,2 m/s流速下获能效率最大值接近40%。