多次覆盖技术在探地雷达勘探中的应用

多次覆盖技术作为一种增强信号、压制干扰的方法,广泛用于地震勘探工作中,可以大大提高有用信号的信噪比。本文作者把多次覆盖技术引入探地雷达测量工作中,通过与剖面法作对比试验来论证多次覆盖技术在探地雷达勘探中应用的可行性及优缺点。作者根据试验资料总结探地雷达工作中雷达波传播规律、工作参数、资料处理方法,对丰富探地雷达勘探技术作了一次有益的尝试。     

Tensor time domain electromagnetic resistivity measurements at Ngatamariki geothermal field, New Zealand

Experimental measurements in the Ngatamariki geothermal field, North Island, New Zealand were made to test the applicability of the time domain electromagnetic method for detailed investigation of the resistivity structure within a geothermal field. Low-frequency square wave signals were transmitted through three grounded bipole current sources sited about 8 km from the measurement lines. Despite high levels of electrical noise, transient electric field vectors could be determined reliably for times between 0.02 and 3.3 s after each step in the source current. Instantaneous apparent resistivity tensors were then calculated. Apparent resistivity pseudosections along the two measurement lines show smooth variations of resistivity from site to site. Over most of the field the images consistently show a three-layer resistivity structure with a conductive middle layer (3–10 Ωm) representing the conductive upper part of the thermal reservoir. A deep-seated region of low resistivity in the northwest of the field may indicate a conductive structure at about 1 km associated with a deeper diorite intrusion. Measurements sited closer than about 100 m to drillholes appear to have been disturbed by metallic casing in the holes. A change in resistivity structure in the east of the field may indicate a major geological or hydrothermal boundary.     

声波测试中振子衰减的线列阵模型

从声波在岩体中传播产生衰减的基本原理出发，建立了声波衰减振子的线列阵模型。该模型是将传播声波路径的岩体分为若干个振子，从波动概念出发，以振动原理作依据建立波动方程．为探讨岩体声波衰减机制提供了一种新的研究方法，把振动和波动直观地联系起来．单一方向上有限点的声波测试技术有可能被多方向的声测技术所代替．该模型的建立，使模态分析和参数识别方法应用到岩体声波测试技术中成为可能。     

利用高频地震波检测混凝土构件完整性的方法

大型混凝土构件（如高层建筑基础的地梁,桩承台等）在施工过程中可能造成局部松散,空洞,蜂窝或离析等质量问题。为检测混凝土构件的的完整性,采用地震勘探方法中的地震映象法（又称地震共偏移距法）。通过在模拟裂缝,空洞模型上的试验,获得了存在异常体时,地震映象时间剖面的波形特征;测得偏移距,点距等参数变化时,对地震映象时间剖面的影响。模型实验和实测工作证明;在合理选择震源各种测量参数条件下,高频地震映象方法可有效检测混凝土构件完整怀,实现对混凝土构件质量新的监测。     

地震序列较强余震灰色及最小二乘拟合预测方法的应用研究

在收集、整理1966年～2002年8月我国(主要为大陆地区)183个5级以上地震序列资料的基础上，应用灰色预测和最小二乘拟合预测方法，对每一地震序列较强(显著)余震发震时间进行“硬性”检验预测。结果表明，2种预测方法对7级以上地震序列和6级地震序列的较强(显著)余震具有较好的预测效能，预测效能分别为76．2％和64．7％；而对5级地震序列预测效果则不甚明显。因此，灰色预测和最小二乘拟合预测方法主要着眼于对大(强)地震的较强(显著)余震预测，可望在地震现场大(强)震应急工作中发挥积极作用。     

金属套管井中电磁测井响应的数值计算

分析了金属套管井中有限尺寸线圈的电磁响应特征,讨论了井眼泥浆参数、套管参数和不同线圈尺寸对电磁测井响应的影响,考察了金属套管中电磁测井对地层电阻率变化的灵敏度.径向非均匀介质的模拟计算表明,在套管井中井眼泥浆对电磁测井的影响较大,必须进行校正.在低频条件下,井间测量响应中金属套管与地层的电磁响应是非耦合的,两者可以分离.在套管参数一定时,套管响应与地层的响应的比值近似一个常数.电磁响应对地层电阻变化的灵敏度分析显示,井间电磁测量在储层研究尺度对地层电阻率变化响应灵敏,套管引起的衰减稳定.在其它参数相同的前提下,线圈直径的增大有助于有效电磁响应信号的增强,给大井间距测量提供了可能.不同磁导率金属套管的电磁响应分析表明,电磁测井中,采用非磁性或弱磁性套管要优于一般的铁磁性套管.     

气枪震源激发模式及应用

气枪震源是一种重要的人工地震震源。气枪阵列理论的提出,使得气枪阵列设计技术日趋成熟,并能够在石油勘探和地球物理探测中得到更加广泛的运用。气枪震源在不同领域中应用时,需要不同的组合和激发模式,以适应不同的探测要求。加强主脉冲和加强气泡脉冲,是目前两种主要的气枪激发模式。通过比较研究两种气枪激发模式,讨论各种激发模式在激发时间、气枪间距、频率、分辨率等方面的差异,为气枪震源的广泛运用提供依据。     

Optimized and robust experimental design: a non-linear application to EM sounding

Pragmatic experimental design requires objective consideration of several classes of information including the survey goals, the range of expected Earth responses, acquisition costs, instrumental capabilities, experimental conditions and logistics. In this study we consider the ramifications of maximizing model parameter resolution through non-linear experimental design. Global optimization theory is employed to examine and rank different EM sounding survey designs in terms of model resolution as defined by linearized inverse theory. By studying both theoretically optimal and heuristic experimental survey configurations for various quantities of data, it is shown that design optimization is critical for minimizing model variance estimates, and is particularly important when the inverse problem becomes nearly underdetermined. We introduce the concept of robustness so that survey designs are relatively immune to the presence of potential bias errors in important data. Bias may arise during practical measurement, or from designing a survey using an appropriate model.     

B-polarization induction in two thin half-sheets coupled to the mantle by a conducting crust—II. Solution by the mode-matching method, the fields above the conductors, and example results

The mode-matching method is used to obtain an exact analytical solution to the problem of B -polarization induction in two adjacent thin half-sheets, lying on a conducting layer that is terminated by a perfect conductor at finite depth. These components of the model represent, respectively, the Earth's conducting surface layers, crust, and mantle. In dimensionless variables, the model has three independent parameters, these being the two thin-sheet conductances and the layer thickness. The mode-matching solution obtained in this paper is shown to be identical lo that derived via the Wiener-Hopf method in a companion paper (Dawson 1996), and so provides additional verification of that solution. As was shown in the companion paper, the solution for the present model contains, as special limiting cases, those for three models considered earlier by various authors. The second part of the present paper addresses the solutions for the electric fields in the non-conducting half-space above the conductors, which represents the atmosphere. In the final part, sample numerical calculations are presented to illustrate the solution.     

Phase-array decomposition of a seismic section

A seismic re fraction/wide-angle reflection profile is analysed for the presence of correlated events ('phases'). The correlation problem is formulated in terms of temporally, spatially and frequency-local complex covariances. For robustness, the method concentrates on phase rather than amplitude information. This allows a computationally efficient algorithm that can make allowance for signal correlation length and can model curved wavefronts. A statistical test based on residual phase misfit across the analysed subarray is used to assess the probability that a detected event represents a real correlated signal.
With our chosen analysis parameters and confidence level (over 99.9 per cent). 1222 events were detected in the data. Using simple techniques based on 1-D earth models, detected events are associated with a small number of particular wave types. In this way, we have succeeded in classifying almost 95 per cent of the detected events. Those that remain describe those components of the data that are inconsistent with our simple ray paths in the 1-D assumption and with our prescribed tolerance. These include reverberations, near-surface guided waves and reflected waves from strongly laterally inhomogeneous structures. According to our modelling, about 25 per cent of the detected events are consistent with simple P -wave reflected energy, and these are to a very large extent (over 85 per cent) distinct from all the other wave-type models we have used. A direct mapping of the detected events into the offset-depth domain reveals dear internal and external consistencies among the detections for the various wave types. Estimated earth structure is consistent with models from previous analyses based on much larger data sets.
We have thus succeeded in extracting correlated events from the data and decomposing these, approximately but meaningfully, into distinct classes (ray paths)