华北地台地热勘探中利用大地电磁测深法(MT)圈定热田范围和探讨地热形成机制

利用大地电磁测深法（MT）反映地质体的电性差异,首先可以确定地质体的空间展布、地质结构和构连;而由于地质体电阻率受地热水影响而降低,进而据此圈定地热水的分布范围;并在此基础上可以进一步探讨地热形成机制。在华北地台地热勘探中MT法取得了较好的勘探效果。     

Simulations of 3D DC borehole resistivity measurements with a goal-oriented <Emphasis Type="Italic">hp</Emphasis> finite-element method. Part II: through-casing resistivity instruments

We simulate direct current (DC) borehole resistivity measurements acquired in steel-cased deviated wells for the assessment of rock formation properties. The assumed data acquisition configuration considers one current (emitter) and three voltage (collector) electrodes that are utilized to measure the second difference of the electric potential along the well trajectory. We assume a homogeneous, 1.27-cm-thick steel casing with resistivity equal to 10^− 5 Ω· m. Simulations are performed with two different numerical methodologies. The first one is based on transferring two-dimensional (2D) axisymmetric optimal grids to a three-dimensional (3D) simulation software. The second one automatically produces optimal 3D grids yielded by a 3D self-adaptive goal-oriented algorithm. Both methodologies utilize high-order finite elements (FE) that are specially well-suited for problems with high-contrast coefficients and rapid spatial variations of the electric field, as it occurs in simulations that involve steel-cased wells. The method based on transferring 2D-optimal grids is efficient in terms of CPU time (few seconds per logging position). Unfortunately, it may produce inaccurate 3D simulations in deviated wells, even though the error remains below 1% for the axisymmetric (vertical) well. The method based on optimal 3D grids, although less efficient in terms of CPU time (few hours per logging position), produces more accurate results that are validated by a built-in a posteriori error estimator. This paper provides the first existing simulations of through-casing resistivity measurements in deviated wells. Simulated resistivity measurements indicate that, for a 30° deviated well, measurements in conductive layers 0.01 Ω· m) are similar to those obtained in vertical wells. However, in resistive layers (10,000 Ω· m), we observe 100% larger readings in the 30° deviated well. This difference becomes 3,000% for the case of a 60° deviated well. For this highly-deviated well, readings corresponding to the conductive formation layer are about 30% smaller in magnitude than those in a vertical well. Shoulder effects significantly vary in deviated wells.     

The upper mantle structure of the yakutian kimberlite province,eastern Russia

Deep seismic sounding in the region of the Mirnyi kimberlite field indicates that the boundary velocity of the uppermost mantle is elevated (v _b=8.6–8.8 km/sec) and extremely variable near the Mir kimberlite pipe. These velocity heterogeneities are probably associated with the kimberlite magmatism and may be useful in the identification of other kimberlite fields.     

Electromagnetic methods to characterize the Savoia di Lucania waste dump (Southern Italy)

The aim of this work is the joint application and integration of non-invasive geoelectrical methods for studying the landfill of Savoia di Lucania (Southern Italy). This landfill for its engineering features and small dimensions (70 m × 30 m × 6 m) represents an optimal test site to assess a geophysical survey protocol for municipal solid waste landfills investigation and monitoring. The landfill of Savoia di Lucania has been built with a reinforced concrete material and coated with a high-density polyethylene (HDPE) liner. Three electrical resistivity tomographies (ERT), two self-potential (SP) map surveys and one induced polarization (IP) section have been performed, both in the surrounding area and inside the waste landfill. The geophysical investigations have well defined some buried boundaries of the landfill basin and localized the leachate accumulation zones inside the dumpsite. Comparison of our results with other engineering and geological investigations could be the key for evaluating the integrity of the HDPE liner. Finally, the joint use of the ERT, IP and SP methods seems to be a promising tool for studying and designing new monitoring systems able to perform a time-lapse analysis of waste landfill geometry and integrity.     

低阻油气储层测井解释方法研究

对低阻油气储层的测井响应特征和储层物性特征进行了研究,并针对研究区域低阻储层的特点,以岩心与测井数据的相关性为依据,提出了适合地区特点的储层参数解释方法。通过应用三水导电模型,提高了低阻储层的测井解释精度。     

视真电阻率ρz在定井位中的应用探讨

介绍了视真电阻率ρz计算方法，通过对实际测深资料与井中电测资料的对比，证明了视真电阻率ρz的可靠性。在实际应用中可取得良好的效果。     

岩石复电阻率Dias模型及其参数求取方法

Dias模型是众多描述岩石复电阻率的频散特性模型中的一种,它不但参数少,且可由这些参数导出具有特定物理意义的参数。针对Dias模型参数的求取及反演解的不确定性评价,这里提出了一种模拟退火阻尼最小二乘联合反演方法。该方法首先将参数求解空间离散化,利用模拟退火找到全局最优解区间,然后利用阻尼最小二乘法在解空间进行求解。该方法有效地克服了原来两种方法的反演速度慢、反演结果依赖于初值的缺点,并实现了对反演结果多解性的评价。研究结果表明,对于岩石复电阻率数据的处理解释,Dias模型的使用比传统的Cole模型及其变形更具有潜在的优势。     

不等电极距情况下高密度电阻率法的反演结果分析

通过高密度电阻率法的模型实验,得出不等电极距情况对直立高阻薄板和低阻球体反演结果的影响:缺失电极对它正下方的ρ_s影响最大,而异常形态主要在水平方向有明显的变化,异常体随电极缺失的位置有趋势变化,电极缺失的数目越多,异常形态变化越大,但是从整体来看反演剖面图基本相似。