Macropores as preferential flow paths in meander bends

Macropores are subsurface connected void spaces caused by processes such as fracture of soils, micro‐erosion, and fauna burrows. They are common near streams (e.g. hyporheic and riparian zones) and may act as preferential flow paths between surface and groundwaters, affecting hydrologic and biogeochemical processes. We tested the hydrologic function of macropores by constructing an artificial macropore within the saturated zone of a meander bend (open macropore, ‘OM’) and later filling its upstream end (partially filled macropore, ‘PFM’). For each treatment, we injected saline tracer at an upgradient monitoring well within the meander and monitored downgradient hydraulics and tracer transport. Pressure transducers in monitoring wells indicated hydraulic gradients within the meander were 32% higher perpendicular to and 6% higher parallel to the macropore for the OM than for the PFM. Additionally, hydraulic conductivities measured via falling head tests were 29 to 550 times higher along the macropore than in nearby sediment. We used electrical conductivity probes in wells and electrical resistivity imaging to track solute transport. Transport velocities through the meander were on average 9 and 21% higher (per temporal moment analysis and observed tracer peak, respectively) for the OM than for the PFM. Furthermore, temporal moments of tracer breakthrough analysis indicated downgradient longitudinal dispersion and breakthrough tracer curve tailing were on average 234% and 182% higher for the OM, respectively. This suggests the OM enabled solute transport at overall shorter timescales than the matrix but also increased tailing. Our results demonstrate the importance of macropores to meander bend hydrology and solute transport. Copyright © 2012 John Wiley & Sons, Ltd.     

GEOPHYSICAL EXPLORATION

正20141074Bao Xijie(Research Institute of Exploration and Development,Daqing Oilfield Company,PetroChina,Daqing 163712,China)Gather Optimal Processing and Application Effect of Prestack AVA Instantaneous Inversion     

地面三维激光扫描仪测量误差检定

在利用三维激光扫描仪进行测量工作前,我们首先应了解其实际测量精度是否符合标称精度,而可靠的评价方式对得到精确的数据结果至关重要。本文利用北京卓立汉光TSA50-C型电动位移台作为评价标准,通过其精确的位移功能,准确地评价了RIGEL VZ-400三维激光扫描仪在测量单点位移时的误差,从而得到了其最佳工作距离。     

四极法电阻率测量在石油管道防腐蚀中的应用

土壤电阻率是地下石油管道一个重要的腐蚀性指标,因为管道的腐蚀程度和土壤电阻率的大小密切相关。本文介绍了四极法电阻率测量的原理和实施过程,并应用于某石油管道周围土壤的勘测,对测试数据做了处理和分析,为输油管道施工设计的防腐蚀提供了科学依据。     

北京和广州地区云闪初始击穿电场变化特征

对比分析了北京和广州地区各100例云闪初始阶段前30 ms快电场变化波形上初始击穿脉冲的特征。依据脉冲的结构特征,两地区的云闪初始击穿脉冲可分为单极性单峰型、单极性多峰型、双极性单峰型和双极性多峰型脉冲,两地区均以单极性和单峰型脉冲为主。对脉冲参量特征的统计发现,脉冲的10%-90%上升时间、半峰值宽度地区差异性小于脉冲类型差异性;双极性单峰型脉冲的半峰值宽是单极性单峰型的1.2倍。不同类型脉冲过零时间的中值、平均值在10μs左右量级,且广州地区较北京地区的大;云闪初始击穿脉冲宽度平均值显著小于相同地区正地闪的,而脉冲间隔显著大于正地闪的。初始击穿脉冲最为集中的出现在云闪最初的1~2 ms,其比例随时间以显著的负指数分布下降。研究发现,双极性脉冲的过零时间与脉冲宽度之间、起始半周期峰值幅度与过冲幅度之间均存在较好的线性关系。     

三维高密度电阻率法在堤坝工程中的模拟试验

为检测堤坝中裂隙、洞穴及渗漏层等隐患的存在,利用三维高密度电阻率法对数字模型和物理模型建立的裂隙隐患进行探测,结果表明室内建立的物理模型在立体图和分层切片图中裂隙的形态有些变化,但其分布范围、位置与相对各自模型中实际的比例尺寸相差不大,说明数值模拟得出的结论可以为实际工程进行理论指导,具有一定的参考价值。     

吉林地区地电阻率震兆异常对比分析

对采用形态法、归一化变化速率法和各向异性度法提取到的吉林省内深源地震以及浅源地震前的地电阻率异常变化进行对比分析,结果表明:(1)震前地电阻率出现1~2年尺度中期异常,甚至短期异常,异常以负异常为主;(2)震前地电阻率原始月均值异常变化幅度1%,表明数字地电仪捕捉电信号灵敏度的提高,更与台址构造密不可分;(3)震前地电阻率出现异常变化,震后恢复到正常变化形态,反映出震前震中区地下应力的变化,震后区域构造应力场重新调整并逐渐恢复的过程。     

定向钻进敷设电缆保护管轨迹优化设计研究

在老旧城区内采用定向钻进敷设地下管线,常常需要从已有的各类地下建（构）筑物或管线下方穿过,方案设计时就应考虑新建管道与之安全距离的取值问题。以厦门市某110 kV电力电缆的定向钻进工程的实际需求为出发点,在对国内现有规程规范及工程实例调查的基础上,对电力电缆保护管定向钻进敷设安全距离取值的影响因素进行分析,优化工程定向钻进敷设方案,指导该工程的建设,并为类似工程建设提供参考。     

Magnetic measurements in electrical prospecting by resistivity methods

The electrical resistivity and induced polarization (IP) methods are widely used in geological mapping, prospecting and exploration of mineral deposits, engineering geology, hydrogeology, archaeology, and geotechnical and environmental applications. Historically, these methods have formed the basis of the electrical prospecting technique. In these methods, a DC or low-frequency AC electrical current is introduced into the earth through a grounded transmitter line. The measured quantity is the electric field. However, if the earth’s resistivity or chargeability changes horizontally, this change gives rise to an anomalous magnetic field, which is studied by the magnetometric resistivity (MMR) and magnetic induced polarization (MIP) methods, respectively. Along with advantages, some shortcomings are inherent in the MMR and MIP techniques. Apparently, the main drawback of these methods is that the magnetic fields of both the transmitter line wire and ground electrodes on the surface are several orders of magnitude greater than the anomalous magnetic field response. This introduces a significant “noise” to magnetic-resistivity data. We investigate the potential of using a circular electric dipole (CED) in magnetometric resistivity techniques. It has been found that the application of a CED, instead of a conventional transmitter line, dramatically enhances the signal-to-noise ratio.