船式支护在基坑中的应用

在深厚软土地区的基坑,对基坑底软土进行搅拌加固形成强度较高的底板而保证坑底稳定,侧壁采用支护桩支护保证侧壁的稳定使其不倾倒,支护桩与加固底板两者共同作用形成的船状结构支护体系类似轮船的船侧壁及船底板,以保证基坑的稳定。结合具体的工程实例,介绍了船式支护的侧壁及底板的设计方法。工程案例成功实施,监测结果表明,船式支护既可避免支护桩嵌固深度过长,又利于软土的土方施工及工程桩的保护,是安全可靠的,对类似工程有一定的参考意义。     

Seismic activity associated with the subducting motion of the Philippine Sea plate beneath the Kanto district, Japan

The Pacific plate and the Philippine Sea plate overlap and subduct underneath the Kanto region, central Japan, causing complex seismic activities in the upper mantle. In this research, we used a map selection tool with a graphic display to create a data set for earthquakes caused by the subducting motion of the Philippine Sea plate that are easily determined. As a result, we determined that there are at least four earthquake groups present in the upper mantle above the Pacific plate. Major seismic activity (Group 1) has been observed throughout the Kanto region and is considered to originate in the uppermost part of mantle in the subducted Philippine Sea plate, judging from the formation of the focal region and comparison with the 3D structure of seismic velocity. The focal mechanism of these earthquakes is characterized by the down-dip compression. A second earthquake layer characterized by down-dip extension (Group 2), below the earthquakes in this group, is also noted. The focal region for those earthquakes is considered to be located at the lower part of the slab mantle, and the Pacific plate located directly below is considered to influence the activity. Earthquakes located at the shallowest part (Group 3) form a few clusters distributed directly above the Group 1 focal region. Judging from the characteristics of later phases in these earthquakes and comparing against the 3D structure of seismic velocity, the focal regions for the earthquakes are considered to be located near the upper surface of the slab. Another earthquake group (Group 4) originates further below Group 2; it is difficult to consider these earthquakes within a single slab. The seismic activities representing the upper area of the Philippine Sea plate are Group 3. This paper proposes a slab geometry model that is substantially different from conventional models by strictly differentiating the groups.     

Lermontovskoe Tungsten Skarn Deposit: the Oldest Mineralization in the Sikhote-Alin Orogen, Far East Russia

Abstract. Lermontovskoe tungsten skarn deposit in central Sikhote-Alin is concluded to have formed at 132 Ma in the Early Cretaceous, based on K-Ar age data for muscovite concentrates from high-grade scheelite ore and greisenized granite. Late Paleozoic limestone in Jurassic - early Early Cretaceous accretionary complexes was replaced during hydrothermal activity related to the Lermontovskoe granodiorite stock of reduced type. The ores, characterized by Mo-poor scheelite and Fe^3+- poor mineral assemblages, indicate that this deposit is a reduced-type tungsten skarn (Sato, 1980, 1982), in accordance with the reduced nature of the granodiorite stock.
The Lermontovskoe deposit, the oldest mineralization so far known in the Sikhote-Alin orogen, formed in the initial stage of Early Cretaceous felsic magmatism. The magmatism began shortly after the accretionary tectonics ceased, suggesting an abrupt change of subduction system. Style of the Early Cretaceous magmatism and mineralization is significantly different between central Sikhote-Alin and Northeast Japan; reduced-type and oxidized-type, respectively. The different styles may reflect different tectonic environments; compressional and extensional, respectively. These two areas, which were closer together before the opening of the Japan Sea in the Miocene, may have been juxtaposed under a transpressional tectonic regime after the magmatism.     

Secular variations of the upper crust composition: Implication of geochemical data on the Upper Precambrian shales from the Southern Urals western flank and Uchur-Maya region

In the mid-1980s, it was concluded based on geochemical study that Th, Sc, La concentrations and ratios Th/Sc, La/Sc and Eu/Eu* did not wary significantly in the post-Archean time. It was impossible to judge about compositional variations of upper crust during the Riphean and Vendian, because data of that time characterized a limited number of samples from the post-Archean basins of Australia, New Zealand, and Antarctic. Considered in this work are variations of Eu/Eu*, LREE/HREE, Th/Sc, and La/Sc ratios in Upper Precambrian fine-grained siliciclastic rock of the Southern Urals western flank (Bashkirian meganticlinorium) and Uchur-Maya region (Uchur-Maya plate and Yudoma-Maya belt). As is established, only the Eu anomaly in the studied siliciclastic rocks is practically identical to this parameter of the average post-Archean shale. Three other parameters plot on the Riphean-Vendian variation curves with positive and negative excursions of diverse magnitude, which do not coincide always in time. It is assumed that these excursions likely mark stages of local geodynamic activity, destruction of pre-Riphean cratons, and progressing recycling of sedimentary material during the Riphean.     

不等电极距情况下高密度电阻率法的反演结果分析

通过高密度电阻率法的模型实验,得出不等电极距情况对直立高阻薄板和低阻球体反演结果的影响:缺失电极对它正下方的ρ_s影响最大,而异常形态主要在水平方向有明显的变化,异常体随电极缺失的位置有趋势变化,电极缺失的数目越多,异常形态变化越大,但是从整体来看反演剖面图基本相似。     

注水煤体应力能 V-f 转化与释放机理研究

文章分析了在煤层注水湿润后煤体弹性能的转化与消耗过程，给出在湿润状态下能量由体变弹性能向形变弹性能转化进而自耗释放的理论模型。指出在坚硬干燥煤体中，注水后在水压力和毛细力的切割作用下，裂隙大量扩展，丰富了自由裂隙，产生更多的裂隙启发(裂隙切口)，使原来近似的刚性煤体变成由裂隙分割的块体组成的组合体或半组合体。裂隙中水的粘滞作用及水分子吸附力使块体问粘性结合、刚度降低、形变增大。煤体形变弹性能自身消耗释放的形式有3种：产生剪应力导致自由裂隙问错动摩擦；强度降低，使裂隙启发被劈裂成自由裂隙；湿润煤体蠕变性增强，产生整体性移动作功。初步给出能量消耗的量化表达式。通过这一理论，能建立煤层注水湿润度与冲击地压灾害发生的更直接的关系，使进一步量化该关系成为可能。从更深层次解释煤层注水防治冲击地压的机理。     

车牌识别仪在车辆管理系统中的应用

本文通过对用户需求的分析，提出了一套具有车牌识别功能的小区车辆管理解决方案。其中对车牌识别仪在小区车辆管理系统中的应用、车牌识别技术及该设计方案中应用系统的功能做了较详细的介绍。     

滑坡治理中格构锚固结构的解析解分析

在分析格构锚固结构受力的基础上 ,将格构梁简化为受集中力作用的弹性地基上的梁 ,提出了格构锚固结构的力学模型 ,利用 Winkler弹性地基上梁的解析解对格构梁进行了内力和变形的分析 ,发现格构梁的受力状况受弹性特征λ、梁格间距 ls以及悬臂长度影响 ;建议梁长 l与λ宜满足 lλ≥ 2π;采用较小间距的格构梁以及小吨位锚索 ,间距宜满足 lsλ<π/ 2 ,悬臂长度取 (0 .3～ 0 .5 ) ls,并将分析结论应用于三峡库区巴东太矶头东滑坡治理工程的设计中