Tensionless–frictionless interaction of flexible annular foundation with a transversely isotropic multi‐layered half‐space

A transversely isotropic multi‐layered half‐space, with axis of material symmetry perpendicular to the free surface, supports a flexible either annular or solid circle foundation. The contact area of the foundation and the half‐space is considered to be both frictionless and tensionless. The foundation is assumed to be affected by a vertical static axisymmetric load. Detailed analysis of the interaction of these two systems with different thickness of layers is the target of this paper. With the use of ring load Green's functions for both the foundation and the continuum half‐space, an integral equation accompanied with some inequalities is introduced to model the complex BVP. With the incorporation of ring‐shape FEM, we are capable of capturing both regular and singular solution smoothly. The validity of the combination of the analytical and numerical method is proved with comparing the results of this paper with a number of benchmark cases of both linear and nonlinear interaction of circular and annular foundation with half‐space. Some new illustrations are presented to portray the aspect of the anisotropy and layering of the half‐space. Copyright © 2014 John Wiley & Sons, Ltd.     

A smoothed cap model for variably saturated soils and its robust numerical implementation

This paper deals with the numerical implementation of a cap model for unsaturated soils. It provides a brief review of existing cap model approaches, based on which an improved model formulated in terms of generalised effective stress and matric suction is derived and described in detail. Although the proposed model is a multisurface plasticity model, it can efficiently be implemented using only single‐surface projections because of the smoothness of the model, which is obtained by construction. Numerical algorithms are provided for these single‐surface stress projections, using a single‐equation approach whenever possible. The robustness of the utilised single‐equation approaches is enhanced by proposing problem‐fitted start‐up procedures based on investigations of the nonlinear projection equations. A comparison of the model response with extensive material test data is used to validate the model and to demonstrate the robust application of the approach to silty sands and low to medium plasticity clays. Copyright © 2015 John Wiley & Sons, Ltd.     

Predicting the dependency of a degree of saturation on void ratio and suction using effective stress principle for unsaturated soils

The paper presents an approach to predicting variation of a degree of saturation in unsaturated soils with void ratio and suction. The approach is based on the effective stress principle for unsaturated soils and several underlying assumptions. It focuses on the main drying and wetting processes and does not incorporate the effects of hydraulic hysteresis. It leads to the dependency of water retention curve (WRC) on void ratio, which does not require any material parameters apart from the parameters specifying WRC for the reference void ratio. Its validity is demonstrated by comparing predictions with the experimental data on four different soils taken over from the literature. Good correlation between the measured and predicted behaviour indirectly supports applicability of the effective stress principle for unsaturated soils. Copyright © 2009 John Wiley & Sons, Ltd.     

Sensitivity of soil parameters in unsaturated zone modelling and the relation between effective,laboratory and in situ estimates

Simulation of soil moisture content requires effective soil hydraulic parameters that are valid at the modelling scale. This study investigates how these parameters can be estimated by inverse modelling using soil moisture measurements at 25 locations at three different depths (at the surface, at 30 and 60 cm depth) on an 80 by 20 m hillslope. The study presents two global sensitivity analyses to investigate the sensitivity in simulated soil moisture content of the different hydraulic parameters used in a one‐dimensional unsaturated zone model based on Richards' equation. For estimation of the effective parameters the shuffled complex evolution algorithm is applied. These estimated parameters are compared to their measured laboratory and in situ equivalents. Soil hydraulic functions were estimated in the laboratory on 100 cm³ undisturbed soil cores collected at 115 locations situated in two horizons in three profile pits along the hillslope. Furthermore, in situ field saturated hydraulic conductivity was estimated at 120 locations using single‐ring pressure infiltrometer measurements. The sensitivity analysis of 13 soil physical parameters (saturated hydraulic conductivity (K_s), saturated moisture content (θ_s), residual moisture content (θ_r), inverse of the air‐entry value (α), van Genuchten shape parameter (n), Averjanov shape parameter (N) for both horizons, and depth (d) from surface to B horizon) in a two‐layer single column model showed that the parameter N is the least sensitive parameter. K_s of both horizons, θ_s of the A horizon and d were found to be the most sensitive parameters. Distributions over all locations of the effective parameters and the distributions of the estimated soil physical parameters from the undisturbed soil samples and the single‐ring pressure infiltrometer estimates were found significantly different at a 5% level for all parameters except for α of the A horizon and K_s and θ_s of the B horizon. Different reasons are discussed to explain these large differences. Copyright © 2004 John Wiley & Sons, Ltd.     

History of faulting in the Northern Hastings Block,southern New England Orogen

Brittle failure is common in the Devonian to Permian rocks in the Northern Hastings Block (NHB) and is manifested by faults of different orientation and kinematic histories, but the timing of fault movement is not well defined. In this study, faults in the NHB were analysed with the map pattern of cross-cutting faults used to estimate the relative time of movement and relationship to other faults. We defined five episodes of faulting or fault reactivation that affected the NHB. The Yarras Fault System on the southwestern side of the NHB and the Parrabel Fault and related faults on the eastern side of the NHB are the two major fault systems responsible for transporting and rotating the NHB in the late Carboniferous. Faults on the eastern, northeastern and northern part of Parrabel Dome started and stopped moving after emplacement of the Hastings Block and before the intrusion of the Werrikimbe Triassic granitoids. We suggested that the movement on the major bounding faults is related to the accommodation of the NHB to the folding and cleavage development in the adjoining Nambucca Block, and is associated with the earliest part of the Hunter–Bowen Orogeny. Limited dextral movement on the extensions of the Taylors Arm Fault System caused minor displacements in the northeastern part of the NHB during the Late Triassic. Some small faults cut the Triassic granitoids or Triassic Lorne Basin sediments indicating tectonic activity continued post-Triassic.     

多光谱遥感影像亮度空间相位一致性特征点检测

提出了一种基于亮度空间和相位一致性理论的多光谱遥感影像特征点检测算法。首先利用参数自适应的灰度变换函数建立影像亮度空间;然后结合相位一致性方法在影像亮度空间进行候选特征点检测,并将候选特征点映射到原始影像上进行非极大值抑制;最后在尺度空间计算特征点的特征尺度值。本文方法有效结合了亮度空间特征检测和相位一致性特征检测的优势,对多光谱遥感影像的辐射变化具有较强的稳健性。试验结果证明,与传统特征点检测算法相比,本文方法在特征重复率和重复特征数量方面都具有明显的优势。     

基于点云空洞修复和TPS模型的数学形态学机载LIDAR滤波

在分析现有滤波算法的基础上,结合数据驱动和模型驱动式算子各自的优点,提出基于点云空洞修复和TPS变形模型的数学形态学机载LIDAR点云滤波,该方法首先提取和修复由水域造成的大面积点云空洞,采用多尺度形态学开算子作用于修复的数据,得到近似裸露地表面;然后利用2D空间的TPS变形模型,以近似地表面为基础,插值原始点云,根据插值与原始点云高程的差值大小去识别地面点和非地面点。通过定量分析,验证该方法不仅有较高的滤波精度,而且也能较好的保留裸露地表的细节特征,同时该方法有助于辅助人工处理,提高数据处理的质量。     

面向应用的航天遥感科学论证研究

为适应中国民用航天遥感从科学试验向业务服务模式转变,更好地探索、了解与解决应用需求与航天遥感系统对接等方面遇到的技术问题,促进航天遥感统筹协调可持续发展,中国适时于2004年成立了国家航天局航天遥感论证中心。10余年来,论证中心以航天遥感系统为研究对象,系统开展了面向应用的航天遥感科学论证概念、理论方法、技术工程与应用研究。本文是论证中心团队长期从事航天遥感科学论证研究与实践的系统总结,介绍了遥感论证初步认知、遥感论证关注问题、遥感论证理论体系与模型方法集、遥感论证能力建设及遥感论证实践等方面内容,给出了遥感论证定义并详细分析了研究范围和内容,提出了由知识维、进程维和逻辑维所组成的遥感论证作用域3维空间结构,指出社会发展加快和信息化水平提高,带动整个航天遥感数据信息链向更大规模、更短响应时间周期、更综合数据集成、更高数据质量、更加智能化方向发展,航天遥感系统将进入新的"智慧遥感"发展阶段。得益于十余年来中国民用航天快速发展,我们经历了风云三号新型载荷校飞、多角度多光谱偏振遥感器论证、环境星应用工程论证等实践,取得了多方面理论方法的突破,并应用到2030民用航天发展规划、高分辨率对地观测系统、国家自然灾害空间信息基础设施、国家民用空间基础设施中长期发展、2030中国综合地球观测系统规划等论证当中。经过不断实践,快速迭代,形成了遥感论证理论体系及相应的十大模型方法,包括遥感信息流模型、遥感信息特征模型、遥感信息应用模型、遥感信息量分析模型、遥感数据工程模型、航天遥感系统结构模型、航天遥感系统状态描述模型、航天遥感系统质量模型、航天遥感系统发展动力模型及能力体系模型。这些模型方法全面反映了航天遥感系统特征、结构、状态、发展动力、条件等,可广泛用于对航天遥感系统进行顶层设计、规划、考察、分析、评价、预测,并开展实践探索。     

姚家岭锌金多金属矿床围岩蚀变三维空间定量分析研究

姚家岭锌金多金属矿床是近年来在长江中下游成矿带铜陵矿集区新发现的大型多金属矿床。姚家岭锌金多金属矿床的成矿作用具有多阶段性的特点,矿床范围内围岩蚀变强烈,蚀变类型复杂多样。三维地质信息技术及三维空间分析方法为定量化分析围岩蚀变的空间分布以及与矿化之间的相关关系提供了有利工具。本文基于上述方法,有效地对姚家岭锌金多金属矿床的围岩蚀变的分带性及其与不同矿化之间的关联性行了定量分析。较之于传统研究方法,不仅能快速地对蚀变与矿化的分布特征进行分析,还能从定量的角度获取不同信息之间的规律性和相关性。本文采用的相关方法不但有助于更准确的判定蚀变分带及规律,还可为矿床的成矿模式及找矿模型的建立提供定量化的数据支持。     

宁波市地下空间开发利用地质环境适宜性评价

随着城市化建设快速推进,地下空间资源开发是解决城市土地资源紧张的合理途径,而地质环境适宜性评价对地下空间的开发利用具有至关重要的作用。本文分析了城市地下空间开发利用地质环境适宜性评价的影响因素,运用层次分析法确定岩土体特征、水文地质条件、环境地质问题、技术经济等指标因素的权重,建立模糊综合评价模型,定量评价宁波东部新城浅层(-15~0m)和中层(-30~-15m)的地下空间开发利用地质环境适宜程度。评价结果显示,东部新城地下空间开发地质环境适宜性等级分为Ⅱ级较适宜和Ⅲ级较不适宜,并根据不同的适宜等级提出了地下空间开发利用方式,为宁波东部新城的地下空间开发利用提供依据。