不同降水天气系统自然降水特征及火箭人工增雨潜力分析

统计分析了1981~2000年20年中15种降水天气系统影响下河北地区自然降水特征,并对火箭人工增雨的潜力进行了初步分析。统计分析表明:西来槽类、高空低涡类、冷锋、切变线和副高后部等天气系统是影响河北地区的主要降水系统,其降雨量和降雨日数占到了90%以上;不同的天气系统在不同季节对降水的贡献有所不同,其中西来槽类的降雨量和降雨日数均居首位,开展人工增雨催化作业机会最多;夏季降水系统最强,云水资源最为丰富,人工增雨潜力很大,是开展火箭人工增雨催化作业的最佳季节,春秋两季增雨潜力明显比夏季小,冬季最小;倒槽、副高后部、台风低压、高空低涡类和气旋类等系统最强,日降雨量和单位面积降雨量明显比其它系统大,尤其对蓄水型火箭增雨作业十分有利。     

Direct Current Plasma Emission Spectrometric Determination of Major, Minor and Trace Elements in Microwave Oven Acid Leachates of Powdered Whole Coal Samples

Major concentrations of Al₂O₃, Fe₂O₃, MgO, CaO, Na₂O and K₂O, minor levels of TiO₂, P₂O₅ and thirty petrologically, geochemically and environmentally significant trace elements have been determined in microwave oven acid leachates of whole powdered coal samples by direct current plasma‐atomic emission spectrometry (DCP‐AES). A single sample preparation procedure was suitable for all the determinations with no additional dilution step for major elements solution. Dried samples (0.5 g) were treated in low‐pressure PFA digestion vessels with HF/HCl/HNO₃/HClO₄ acids to quantitatively extract the analytes from the bulk material, while leaving the major part of organic matrix as a residue. The major constituents of geological samples, in particular the easily ionised elements (EIEs) such as alkali and alkaline earths, may complicate the instrumental determinations in DCP‐AES because of differential enhancements of elemental emission intensities and stray light interferences. Taking account of these factors, the coal matrix is considered to have very low major oxide totals as compared to many other common geo‐environmental and related materials (rocks, sediments, soil, ashes etc.). The sample size employed here, while yielding a relatively concentrated solution to cover a wide range of elemental determinations, provided a sample matrix that significantly diminished interferences for DCP measurements. The need for closely matching the unknowns and calibrators was eliminated except for overall acidity and an excess quantity of caesium for EIE buffering. Calibration of the spectrometer was accomplished by simple aqueous single element solutions as high concentration calibrators in addition to a reagent blank as a low concentration calibrator. Two point working curves were established to allow for the maximum concentrations of each element expected in the unknowns. The precision of determinations under routine conditions as well as the reproducibility of the leaching and precision of instrumental measurements have been evaluated. Relative standard deviations (RSD) were of 1–2% for those elements whose concentrations in solid samples were well above the limits of quantification. Method detection limits in the buffered solutions were also evaluated. To evaluate the accuracy of the microwave oven‐DCP method a suite of eight certified coal reference materials of differing rank, were analysed with good agreement with the certified and/or available published data. Results are presented for the uncertified major oxides in the AR series reference materials.     

多尺度细节增强的遥感影像超分辨率重建

鉴于现有超分辨率重建方法难以突显重建影像细节信息的问题,提出多尺度细节增强的遥感影像超分辨率重建模型框架。首先,通过最小二乘滤波方法将序列影像分解成包含大尺度边缘的平滑信息和包含中小型尺度的细节信息;其次,利用插值方法得到相应的高分辨率细节信息和平滑信息,构造纹理细节增强函数,提升中小型细节的增强幅度;最终,融合细节信息和平滑信息,得到初始的超分辨率重建结果,并利用局部优化模型进一步改善重建影像质量。选取同时相和多时相遥感影像作为试验数据。试验结果表明,本文重建结果与插值方法、TV方法和MAP方法相比,在客观评价指标上均有显著提高,明显改善了重建影像的纹理细节。论文提出的多尺度细节增强的超分辨率重建方法,可以使重建影像提供更多高频细节信息,具有较好鲁棒性和普适性。     

SAR影像与光学影像的高斯伽玛型边缘强度特征匹配法

提出了一种基于影像边缘强度图描述的SAR影像与光学影像匹配方法。首先对影像进行粗纠正,消除影像之间的尺度和旋转变化;其次,改进相位一致性特征检测方法,提取对影像相干斑噪声稳健的特征点;然后基于高斯伽玛型双边窗口比值算子计算影像边缘强度图,在此基础上构造不变特征描述符;最后联合几何约束条件,实现SAR影像与光学影像匹配。试验结果证明,与现有方法相比,本文方法能够大幅提高SAR影像与光学影像匹配结果中的正确匹配特征数量以及影像配准精度。     

一种四叉树和测地线活动轮廓模型相结合的海陆影像分割方法

海陆影像分割对于后续的海岸线提取、潮间带地形反演、海岸演化状况分析等都具有十分重要的意义。本文在分析了四叉树、测地线活动轮廓(GAC)模型和Canny边缘检测算子等在海陆影像分割中优缺点的基础上,提出了一种四叉树、Canny算子和GAC模型相结合的海陆影像分割方法。该方法综合利用上述各方法的优点,将Canny算子边缘检测结果融入到基于四叉树初分割的GAC模型中,重构边界停止函数,演化水平集方程,实现海陆影像分割。试验结果表明,该方法具有海陆影像分割速度快、精度高、可靠性强和自动化程度高等优点,对于弱边缘以及严重凹陷边缘,都能实现自动和准确分割。     

热红外与可见光数据的云边缘高度匹配

高分辨率数据中云高度的差异性突显,特别是边缘处高度在云阴影识别和地表辐射估算等方面成为需要考虑的重要因素。热红外数据获取云高度分辨率较低、缺乏细部差异性特征,为解决这一问题,首先将对应的热红外和可见光数据进行特征点配准,再将基于热红外数据计算的云高度重采样至高分辨率,然后以基于欧式距离变换的围线搜索方法及距离加权将热红外云边缘高度匹配至对应的可见光图像,最后根据云阴影的相似度匹配方法确定真实云高度。结果表明,算法在遵循热红外云高信息分布变化规律的同时,可以得到较准确的高分辨率云边缘高度,一定程度上解决了热红外技术获取云高在分辨率上的局限,扩展了其在云高反演方面的作用。     

Copper Speciation in a Collection of Geochemical Reference Materials Using Sequential Extraction and Evaluation of the Validity Using XANES Spectroscopy

Copper speciation in a collection of Japanese geochemical reference materials (JSO‐1, JLk‐1, JSd‐1, ‐2, ‐3 and ‐4, JMs‐1 and JMs‐2) was achieved by sequential extraction and characterised using X‐ray absorption near‐edge structure spectroscopy. In the first step of the extraction, referred to as the acid fraction, between 1% and 20% total Cu within the reference materials was extracted. Such a result is typically accounted for by absorption of Cu onto clay minerals. However, the presence of Cu sulfate (an oxidation product of chalcopyrite) was observed in some of the stream sediments affected by mining activity (JSd‐2 and JSd‐3) instead. Copper was extracted in the reducible fraction (targeting Fe hydroxide and Mn oxide) (2–49% total Cu). Between 2% and 51% Cu was extracted in the oxidised fraction (targeting sulfides and organic matter). X‐ray absorption near‐edge structure spectroscopy clarified that the reducible fraction consisted of Cu bound to Fe hydroxide, whereas the oxidised fraction was a mixture of Cu bound to humic acid (HA) and Cu sulfide. In the oxidisable fraction, chalcopyrite was the predominant species identified in JSd‐2, and Cu bound to HA was the major species identified in JSO‐1 (a soil sample).     

川东长兴组台缘礁滩相储层纵向非均质性特征及形成机制——以川东宣汉盘龙洞长兴组剖面为例

近几年,随着四川盆地海相碳酸盐岩储层勘探的不断加强,碳酸盐岩储层强的非均质性已成为制约礁滩气藏勘探开发的现实问题。以川东宣汉盘龙洞长兴组典型台缘礁滩剖面为研究对象,通过对典型台缘礁滩野外剖面的精细观察,结合镜下薄片及岩矿资料分析,重点探讨了盘龙洞礁滩储层纵向非均质性特征及成因。剖面上礁滩体垂向上存在很强的旋回性和储层非均质性,其储集岩分布、储层厚度、白云岩化程度、溶蚀作用等受海平面周期性的升降变化影响而呈现周期性变化。礁滩储层非均质性受高能相带、海平面升降变化和建设性成岩作用的共同控制,高能相带控制储层原生孔隙的发育,决定了储层的沉积非均质性,白云岩化和溶蚀作用有利于礁滩体储层的形成,大气淡水淋滤改造对于优化储层具有关键作用,海平面升降变化决定了礁滩体旋回性发育,而建设性成岩作用的选择性改造深化了储层非均质性。     

Shelf‐margin clinothem progradation,degradation and readjustment: Tanqua depocentre,Karoo Basin (South Africa)

Degradation of basin‐margin clinothems around the shelf‐edge rollover zone may lead to the generation of conduits through which gravity flows transport sediment downslope. Many studies from seismic‐reflection data sets show these features, but they lack small‐scale (centimetre to metre) sedimentary and stratigraphic observations on process interactions. Exhumed basin‐margin clinothems in the Tanqua depocentre (Karoo Basin) provide seismic‐reflection‐scale geometries and internal details of architecture with depositional dip and strike control. At the Geelhoek locality, clinothem parasequences comprise siltstone‐rich offshore deposits overlain by heterolithic prodelta facies and sandstone‐dominated deformed mouth bars. Three of these parasequences are truncated by a steep (6 to 22°), 100 m deep and 1·5 km wide asymmetrical composite erosion surface that delineates a shelf‐incised canyon. The fill, from base to top comprises: (i) thick‐bedded sandstone with intrabasinal clasts and multiple erosion surfaces; (ii) scour‐based interbedded sandstone and siltstone with tractional structures; and (iii) inverse‐graded to normal‐graded siltstone beds. An overlying 55 m thick coarsening‐upward parasequence fills the upper section of the canyon and extends across its interfluves. Younger parasequences display progressively shallower gradients during progradation and healing of the local accommodation. The incision surface resulted from initial oversteepening and high sediment supply triggering deformation and collapse at the shelf edge, enhanced by a relative sea‐level fall that did not result in subaerial exposure of the shelf edge. Previous work identified an underlying highly incised, sandstone‐rich shelf‐edge rollover zone across‐margin strike, suggesting that there was migration in the zone of shelf edge to upper‐slope incision over time. This study provides an unusual example of clinothem degradation and readjustment with three‐dimensional control in an exhumed basin‐margin succession. The work demonstrates that large‐scale erosion surfaces can develop and migrate due to a combination of factors at the shelf‐edge rollover zone and proposes additional criteria to predict clinothem incision and differential sediment bypass in consistently progradational systems.     

新疆西昆仑汗铁热克一带侏罗纪沉积相与沉积环境分析

新疆西昆仑汗铁热克一带地处塔里木盆地西南缘,构造上属塔里木盆地与西昆仑造山带的结合部位,侏罗纪地层包括积莎里塔什组、康苏组、扬叶组、塔尔尕组和库孜贡苏组。根据岩性、颜色、粒度分析及沉积相标志等方法,将汗铁热克一带侏罗纪沉积环境与沉积相划分为冲积扇、扇三角洲和湖泊相,其沉积特征为侏罗纪早期快速充填,中期稳定沉降,晚期短暂的沉积间断后充填,并系统分析了研究区在整个侏罗纪沉积环境演化规律。