城市点云的区域生长三角网构建方法

成熟的倾斜摄影测量及密集匹配技术可获取密集的城市点云,对点云进行三角网构建是真三维建模的关键技术之一。提出了基于区域生长的三角网构建方法,使用双约束条件提高点云的搜索效率,基于点边表数据结构进行网格生长,利用夹角约束和三角形孔洞修补优化网格。实验证明,该方法获取的三角网能够准确地表达楼体、桥状建筑等在内的城市实体,网格优化后的孔洞比例约为1‰并且该方法具有一定的抗噪能力。     

Response of low‐angle dunes to variable flow

Current understanding of bedform dynamics is largely based on field and laboratory observations of bedforms in steady flow environments. There are relatively few investigations of bedforms in flows dominated by unsteadiness associated with rapidly changing flows or tides. As a consequence, the ability to predict bedform response to variable flow is rudimentary. Using high‐resolution multibeam bathymetric data, this study explores the dynamics of a dune field developed by tidally modulated, fluvially dominated flow in the Fraser River Estuary, British Columbia, Canada. The dunes were dominantly low lee angle features characteristic of large, deep river channels. Data were collected over a field ca 1·0 km long and 0·5 km wide through a complete diurnal tidal cycle during the rising limb of the hydrograph immediately prior to peak freshet, yielding the most comprehensive characterization of low‐angle dunes ever reported. The data show that bedform height and lee angle slope respond to variable flow by declining as the tide ebbs, then increasing as the tide rises and the flow velocities decrease. Bedform lengths do not appear to respond to the changes in velocity caused by the tides. Changes in the bedform height and lee angle have a counterclockwise hysteresis with mean flow velocity, indicating that changes in the bedform geometry lag changes in the flow. The data reveal that lee angle slope responds directly to suspended sediment concentration, supporting previous speculation that low‐angle dune morphology is maintained by erosion of the dune stoss and crest at high flow, and deposition of that material in the dune trough.     

Smoothing and re-roughening processes: The geometric evolution of a single fault zone

The geometry of a fault zone exerts a major control on earthquake rupture processes and source parameters. Observations previously compiled from multiple faults suggest that fault surface shape evolves with displacement, but the specific processes driving the evolution of fault geometry within a single fault zone are not well understood. Here, we characterize the deformation history and geometry of an extraordinarily well-exposed fault using maps of cross-sectional exposures constructed with the Structure from Motion photogrammetric method. The La Quinta Fault, located in southern California, experienced at least three phases of deformation. Multiple layers of ultracataclasite formed during the most recent phase. Crosscutting relations between the layers define the evolution of the structures and demonstrate that new layers formed successively during the deformation history. Wear processes such as grain plucking from one layer into a younger layer and truncation of asperities at layer edges indicate that the layers were slip zones and the contacts between them slip surfaces. Slip surfaces that were not reactivated or modified after they were abandoned exhibit self-affine geometry, preserving the fault roughness from different stages of faulting. Roughness varies little between surfaces, except the last slip zone to form in the fault, which is the smoothest. This layer contains a distinct mineral assemblage, indicating that the composition of the fault rock exerts a control on roughness. In contrast, the similar roughness of the older slip zones, which have comparable mineralogy but clearly crosscut one another, suggests that as the fault matured the roughness of the active slip surface stayed approximately constant. Wear processes affected these layers, so for roughness to stay constant the roughening and smoothing effects of fault slip must have been approximately balanced. These observations suggest fault surface evolution occurs by nucleation of new surfaces and wear by competing smoothing and re-roughening processes.     

SAR影像与光学影像的高斯伽玛型边缘强度特征匹配法

提出了一种基于影像边缘强度图描述的SAR影像与光学影像匹配方法。首先对影像进行粗纠正,消除影像之间的尺度和旋转变化;其次,改进相位一致性特征检测方法,提取对影像相干斑噪声稳健的特征点;然后基于高斯伽玛型双边窗口比值算子计算影像边缘强度图,在此基础上构造不变特征描述符;最后联合几何约束条件,实现SAR影像与光学影像匹配。试验结果证明,与现有方法相比,本文方法能够大幅提高SAR影像与光学影像匹配结果中的正确匹配特征数量以及影像配准精度。     

一种四叉树和测地线活动轮廓模型相结合的海陆影像分割方法

海陆影像分割对于后续的海岸线提取、潮间带地形反演、海岸演化状况分析等都具有十分重要的意义。本文在分析了四叉树、测地线活动轮廓(GAC)模型和Canny边缘检测算子等在海陆影像分割中优缺点的基础上,提出了一种四叉树、Canny算子和GAC模型相结合的海陆影像分割方法。该方法综合利用上述各方法的优点,将Canny算子边缘检测结果融入到基于四叉树初分割的GAC模型中,重构边界停止函数,演化水平集方程,实现海陆影像分割。试验结果表明,该方法具有海陆影像分割速度快、精度高、可靠性强和自动化程度高等优点,对于弱边缘以及严重凹陷边缘,都能实现自动和准确分割。     

热红外与可见光数据的云边缘高度匹配

高分辨率数据中云高度的差异性突显,特别是边缘处高度在云阴影识别和地表辐射估算等方面成为需要考虑的重要因素。热红外数据获取云高度分辨率较低、缺乏细部差异性特征,为解决这一问题,首先将对应的热红外和可见光数据进行特征点配准,再将基于热红外数据计算的云高度重采样至高分辨率,然后以基于欧式距离变换的围线搜索方法及距离加权将热红外云边缘高度匹配至对应的可见光图像,最后根据云阴影的相似度匹配方法确定真实云高度。结果表明,算法在遵循热红外云高信息分布变化规律的同时,可以得到较准确的高分辨率云边缘高度,一定程度上解决了热红外技术获取云高在分辨率上的局限,扩展了其在云高反演方面的作用。     

顾及拓扑与尖角的分类矢量数据分组压缩算法

针对现有拆分重组法对存在复杂内环以及复杂相交岛屿多边形的分类矢量数据的压缩结果中包含裂缝、重叠及大量尖锐夹角的问题,提出了一种顾及拓扑一致性与尖角的分组压缩方法。依据分类矢量数据中多边形与多边形及其内环的相交关系对矢量矢量数据分组,以修正后拆分重组法结合直接分割法和间接分割法对分类矢量数据分组压缩,压缩结果中不存在裂缝与重叠现象,维护了分类矢量数据的拓扑一致性;通过取回尖角点前后被删除的点,解决了压缩结果中尖角过多的问题。以Landsat8遥感影像分类矢量数据实验验证了文章算法,并与直接分割法、间接分割法、拆分重组法进行了对比分析,验证了本文方法的有效性。     

An experimental study on water entry of asymmetric wedges

The aim of the paper is to provide an experimental reference for investigation of asymmetric water entry of wedges. Parameters of the study include initial deadrise angle, inclination angle and impact speed. Initial deadrise angles of the wedges were 20° and 30° with inclination angles ranging from 0° to 15° in 5° increments. Wedges were freely fallen from three different heights. Time histories of impact pressure and body acceleration were recorded. Sampling rate of measurements were set to 25 KHz. Main configuration of each test including mass of the wedge and water level were kept unchanged during all experiments. Additionally, several calibration tests were conducted to assess the repeatability and accuracy of the recorded data. The experimental results are compared with different entry theories and other available experiments. The comparison shows a reasonable agreement and indicates that the inclination angle can dramatically affect the impact pressure experienced by the wedges. Finally, the results show that the traditional asymmetric theories are not appropriate for all inclination angles.     

小入射角下海浪后向散射系数不对称性和各向异性分析验证

基于北京遥测技术研究所机载波谱仪实测数据以及ECMWF提供的风场数据,分析了不同风速条件下小入射角海浪平均后向散射系数不对称性与各向异性随入射角的变化特性,并对导致这一现象的原因进行了初步分析。结果表明:小入射角下,海浪平均后向散射系数随入射角增大呈现递减趋势并在18°时达到某一稳定值,之后基本维持不变;海浪后向散射系数不对称性与各向异性均随入射角增大呈现递增趋势,同样在18°增大至某一稳定值,之后基本维持不变;低风速条件下,海浪不对称性和各向异性与风速有关,且风速越大不对称性与各向异性越明显。     

Copper Speciation in a Collection of Geochemical Reference Materials Using Sequential Extraction and Evaluation of the Validity Using XANES Spectroscopy

Copper speciation in a collection of Japanese geochemical reference materials (JSO‐1, JLk‐1, JSd‐1, ‐2, ‐3 and ‐4, JMs‐1 and JMs‐2) was achieved by sequential extraction and characterised using X‐ray absorption near‐edge structure spectroscopy. In the first step of the extraction, referred to as the acid fraction, between 1% and 20% total Cu within the reference materials was extracted. Such a result is typically accounted for by absorption of Cu onto clay minerals. However, the presence of Cu sulfate (an oxidation product of chalcopyrite) was observed in some of the stream sediments affected by mining activity (JSd‐2 and JSd‐3) instead. Copper was extracted in the reducible fraction (targeting Fe hydroxide and Mn oxide) (2–49% total Cu). Between 2% and 51% Cu was extracted in the oxidised fraction (targeting sulfides and organic matter). X‐ray absorption near‐edge structure spectroscopy clarified that the reducible fraction consisted of Cu bound to Fe hydroxide, whereas the oxidised fraction was a mixture of Cu bound to humic acid (HA) and Cu sulfide. In the oxidisable fraction, chalcopyrite was the predominant species identified in JSd‐2, and Cu bound to HA was the major species identified in JSO‐1 (a soil sample).