Physical properties of ultrahigh-pressure metamorphic rocks from the Sulu terrain, eastern central China: implications for the seismic structure at the Donghai (CCSD) drilling site

About 30 samples representing major lithologies of Sulu ultrahigh-pressure (UHP) metamorphic rocks were collected from surface exposures and exploration wells, and compressional (Vp) and shear wave (Vs) velocities and their directional dependence (anisotropy) were determined over a range of constant confining pressures up to 600 MPa and temperatures ranging from 20 to 600 °C. Samples range in composition from acidic to ultramafic. P- and S-wave velocities measured at 600 MPa vary from 5.08 to 8.64 km/s and 2.34 to 4.93 km/s, respectively. Densities are in the range from 2.60 to 3.68 g/cm³. To make a direct tie between seismic measurements (refraction and reflection) and subsurface lithologies, the experimental velocity data (corresponding to shallow depths) were used to calculate velocity profiles for the different lithologies and profiles of reflection coefficients at possible lithologic interfaces across the projected 5000-m Chinese Continental Scientific Drilling Program (CCSD) crustal segment. Comparison of calculated in situ velocities with respective intrinsic velocities suggests that the in situ velocities at shallow depths are lowered by an increased abundance of open microcracks. The strongly reflective zone beneath the Donghai drill site can be explained by the impedance contrasts between the different lithologies. Contacts between eclogite/peridotite and felsic rocks (gt-gneiss, granitic gneiss), in particular, may give rise to strong seismic reflections. In addition, shear-induced (lattice preferred orientation (LPO)-related) seismic anisotropy can increase reflectivity. For the explanation of the high velocity bodies (>6.4 km/s) around 1000 m and below 3200-m depth, large proportions of eclogite/peridotite (about 40 and 30 vol.%, respectively) are needed.     

Analyzing CO2 emissions mitigation by technology improvement in Central and Eastern Europe

As a legacy of the centrally planned economy, the economies in transition of Central and Eastern Europe (CEE) have a unique potential to reduce their greenhouse gas emissions through the improvement in their high energy intensities. Since much of this `low-hanging fruit' in energy-efficiency improvements can be highly cost-effective, many developed countries facing difficulties in meeting their greenhouse gas (GHG) emission targets domestically are eager to find such opportunities in the CEE region. Therefore, studies analysing the potentials and costs of carbon dioxide reduction through technology improvement in the region have come into the limelight. While there are a few excellent studies in the region aimed at analysing climate change abatement potentials, they all embark on different assumptions, methodologies and boundary conditions. It is hence difficult, if not impossible, to compare and analyse the results of these studies across different authors, countries or time horizons. Consequently, the purpose of this paper is to place four leading studies on GHG mitigation through technology improvement from the CEE region into an internationally comparable framework. Four studies were selected from three countries, Poland, Hungary and Estonia, which are all the results of major national and international efforts to assess costs and potentials of GHG reduction. The paper places their assumptions, methods and final results into a framework which enables policy-makers and project designers to compare these across geographical and technological boundaries. Since other studies from around the globe have been analysed in this framework in the literature, this paper provides a vehicle for the findings of these four studies to be compared to others worldwide. In addition, the paper highlights a few areas where similar studies to be completed in the future in the region may be enhanced by incorporating features used in GHG mitigation research in other parts of the world. This revised version was published online in July 2006 with corrections to the Cover Date.     

Historic Dead Sea Level Fluctuations Calibrated with Geological and Archaeological Evidence

The Dead Sea, the Holocene terminal lake of the Jordan River catchment, has fluctuated during its history in response to climatic change. Biblical records, calibrated by radiocarbon-dated geological and archaeological evidence, reinforce and add detail to the chronology of the lake-level fluctuations. There are three historically documented phases of the Dead Sea in the Biblical record: low lake levels ca. 2000–1500 B.C.E. (before common era); high lake levels ca. 1500–1200 B.C.E.; and low lake levels between ca. 1000 and 700 B.C.E. The Biblical evidence indicates that during the dry periods the southern basin of the Dead Sea was completely dry, a fact that was not clear from the geological and archaeological data alone.     

扎赉诺尔煤田水文地球化学特征及成因分析

扎赉诺尔煤田地处山前,有利的地理环境条件形成了独特的水文地质特征—地下水的垂直分带和地下水顺层径流。其特有的水文地球化学环境导致了地下水成分的差异性。本文从水文地球化学的角度,对煤田地下水的水文地球化学特征及成因进行了论述分析。     

Cathodoluminescence of authigenic albite

Authigenic albites in carbonate rocks typically grow in a high-grade diagenetic to low-grade metamorphic environment and often show Roc-Tourné-twinning sensu Füchtbauer. Based on an investigation of four Middle to South European occurrences, they show Mn²⁺- and Fe³⁺-activated cathodoluminescence (CL), as revealed by combined high resolution spectroscopy of cathodoluminescence emission (HRS-CL), electron paramagnetic resonance (EPR), and proton-induced X-ray emission (μPIXE).     

Documentary and Geological Records of Tsunamis in the Aegean Sea Region of Greece and their Potential Value to Risk Assessment and Disaster Management

Understanding the nature and impacts of tsunamis within the Aegean Sea region ofGreece is of importance to both the academic community and those organisationsconcerned with tsunami disaster management. In order to determine hazard and riskand consequently pre-plan mitigative strategies, it is necessary to analyse historical(documentary) and geological records of former tsunami events. Therefore, firstlythis paper provides a summary of the written sources of information on Aegeantsunamis paying particular attention to published catalogues. From the availabledata, it is noted that a large number of events have been reported during the last3500 years. Secondly, the paper provides a review of the published on-shore(terrestrial) geological records of tsunamis within the region. From this analysisit is seen that little geological evidence has been identified for the large numberof tsunamis reported in the catalogues. Thirdly, the paper considers the reliabilityof the written and geological records and how problems of accuracy, coverage,extent and reliability, may have potential implications for the estimation of hazardand risk. The paper concludes by making recommendations for disaster managers,geologists and historians to work closely together.     

交流变频调速CD-2B型岩心钻机的研制

介绍了交流变频调速CD－2B型岩心钻机研制情况，技术参数，主要特点及型式检验，生产试验等情况。     

山地丘陵地区物探爆破孔钻机及配套机具的研究与开发

为满足我国山地丘陵地区物探爆破孔施工技术的要求，研究适合土层、岩层钻进用的钻机及工具，对钻机的配套设备进行了开发研究。分析了国内山地丘陵地区物探爆破孔施工技术现状，并着重介绍了研制设计内容及生产试验情况。     

吉林省大横路铜、钴矿床地质特征及控矿因素

大横路地区出露地层主要为元古界老岭群大栗子组和珍珠门组的低绿片岩相 -高绿片岩相到低角闪岩相的变质岩系 ,北部有少量英云闪长岩 -奥长花岗岩和表壳岩残块。侵入岩主要以燕山期基性 -中基性为主。铜钴矿床产于含碳绢云千枚岩中 ,矿体长 36 0～ 140 0m ,宽 95～ 80 0m ,厚 3～ 10 8.7m ,呈层状、似层状、分枝状 ,矿石以浸染状为主 ,次为脉状、网脉状。矿床属多期多成因类型 ,主要受大栗子组地层、北东向断裂构造和变质作用控制 ,并有岩浆热液的叠加。     

Experimental Study on Mine Spoils During Superficial Geochemistry Processes

Based on the mineral and chemical compositions of spoils taken from the Shilu Cu-Mo deposit and Hetai gold deposit, the leaching and batch experiments were made on spoils taken from these two deposits using the leaching column designed by the authors. The experimental results showed that it is not always true that the mine drainage is acidic. Its acidity depends on acid-buffering capacity of gangue, host rock and its alteration mineral assemblage. The composition of the drainage water is related with the interaction between superficial or underground water and solid materials in the spoils, including minerals, hydroxides and amorphous substances. The leaching extent of the element is related with its occurrence form in the deposit. The preferential flow results in leaching-out of heavy metals in large amounts. So it is important to prevent the generating of preferential flow in the system. The results will provide very important grounds for the comprehensive management of land and ecological rehabilitation of the mine site.