基于空间信息技术的堰塞湖库容分析方法研究

快速准确计算堰塞湖库容,对了解地震堰塞湖险情具有重要的意义.利用遥感和地理信息系统等空间信息技术,提出了一种基于像素的三维水面的计算动库容的方法,能准确计算水面为曲面,包括动库容在内的总库容.该方法利用遥感影像提取水体边界线,与DEM求交后可得到带高程的边界点,利用空间插值技术获得三维水面,然后利用库容计算模型求解.同时,在分析该算法计算效率的基础上,提出了基于河流分段的库容计算优化算法,最后通过实验对比分析了该方法的合理性和优越性.     

Formation Dynamics and Quantitative Prediction of Hydrocarbons of the Superpressure System in the Dongying Sag

Based on the theory of formation dynamics of oil/gas pools, the Dongying sag can be divided into three dynamic systems regarding the accumulation of oil and gas： the superpressure closed system, the semi-closed system and the normal pressure open system. Based on the analysis of genesis of superpressure in the superpressure closed system and the rule of hydrocarbon expulsion, it is found that hydrocarbon generation is related to superpressure, which is the main driving factor of hydrocarbon migration. Micro fractures formed by superpressure are the main channels for hydrocarbon migration. There are three dynamic patterns for hydrocarbon expulsion： free water drainage, hydrocarbon accumulation and drainage through micro fissures. In the superpressure closed system, the oil-driving-water process and oil/gas accumulation were completed in lithologic traps by way of such two dynamic patterns as episodic evolution of superpressure systems and episodic pressure release of faults. The oil-bearing capacity of lithologic traps is intimately related to reservoir-forming dynamic force. Quantitative evaluation of dynamic conditions for pool formation can effectively predict the oil-bearing capability of traps.     

基于ArcScene的建筑物日照分析模块的设计与实现

介绍了利用ArcObjects开发、基于ArcScene的建筑物日照分析模块的研制,对各个子模块作了介绍。特别对涉及到的日照分析技术、阴影动态显示、3维建筑设计等技术做了详细的说明。最后对该模块的应用做了简要演示。     

GM（1，1）动态模型在吴江市地下水水位预测中的应用

以吴江市地下水水位预测为例,详细阐述了地下水水位时间序列的GM（1,1）动态模型的原理和建立过程,并根据模型的预测值和实测值,对模型的精度进行了检验,结果表明,模型的预测精度达到了99．27％,等级属于Ⅰ级,具有实际的应用价值,为地下水资源的科学管理提供了依据。     

Earthquake rupture complexity due to dynamic nucleation and interaction of subsidiary faults

We numerically study the dynamic interaction of propagating cracks. It is assumed that propagating cracks can nucleate and drive subsidiary cracks because of shear strain enhancement near the propagating crack tips. The critical strain fracture criterion is assumed in the analysis. Intense interaction is expected to occur among the cracks. All the cracks are assumed to be parallel and antiplane strain deformation is assumed in the computation.In the interaction of two non-coplanar cracks, a strain shadow is formed in the neighborhood of each crack because of the strain release by the introduction of the crack. The growth of each crack is accelerated when the propagating tips of each crack are outside of the strain shadow of the other crack. In general, the crack tips enter the strain shadow, and the crack tips decelerate. The calculation shows that only one of the two cracks can continue to grow, and the other's growth is decelerated and arrested. If we can assume that the suite of cracks interact in a pairwise manner only, then this may suggest that only a limited number of cracks can continue to grow during the final stage of the rupture process. Hence the crack interaction causes complexity in dynamic earthquake faulting. The concepts of barrier and asperity have been employed by many researchers for the interpretation of complex seismic wave data. However, the physical realities of such concepts are obscure. Our calculations show that dynamic crack interactions can produce barriers and asperities in some cases; the crack tip deceleration or arrest due to the interactions among non-coplanar cracks can be interpreted as being due to a barrier. The dynamic coalescence among the coplanar cracks can be regarded as an asperity.Umeda found a localized area that strongly radiates high-frequency seismic waves in the epicentral areas of some large shallow earthquakes. He defined this as an earthquake bright spot. Our analysis implies that only a limited number of cracks continue to grow when many interactive cracks nucleate, and that all other cracks stop extending soon after nucleation. Hence, if the nucleation and termination of several cracks occur in a localized area, it will be observed seismologically as an earthquake bright spot. This is because it is theoretically known that the sudden termination of crack growth and dynamic crack coalescence efficiently emits high-frequency elastic waves.     

热液成矿作用的地质地球化学动力学——以胶东牟平-乳山金矿带为例

通过对胶东牟平—乳山热液脉状金,铅锌矿床成矿动力学控制规律的研究,说明了建立热液成矿反应体系的方法,并得出以下认识:（1）区域断裂构造活动,通过影响成矿反应体系的热力学性质和条件,控制元素的富集和分散。（2）热液成矿过程中容矿断裂活动可划分为两种作用方式:脆性破裂和韧—脆性张开,构成热液成矿的两种构造动力学环境。（3）热液成矿反应体系是一种开放的动态的热力学体系。断裂的脆性破裂阶段,使体系处于强烈的过饱和状态,矿质在远离平衡状态下快速结晶,加剧物质分异;在脆—韧性张开阶段,矿质在接近平衡态体系中缓慢晶出。（4）热液演化晚期,金在残余溶液中富集;当断裂再次发生构造脉动震颤时,早期形成的块状黄铁矿矿石碎裂,富金溶液充填其中,形成含裂隙金和晶隙金的富矿石。成矿体系热力学演化与构造动力学条件有利的匹配控制着富矿石的形成。     

鲁23井“动水位”观测的分析

本文介绍了鲁23井“动水位”观测情况。提出了一个分析有泄流的“动水位”的新方法,即把流量换算成水位,以等效静水位来表示“动水位”与流量。由于把“动水位”与流量用一个量来计算,从而为“动水位”观测定量的、统一的分析研究提供了新的方法。这对提高“动水位”井的监测预报地震能力起一定的作用。 本文还以鲁23井“动水位”观测资料为例,利用新方法进行处理的观测分析结果与理论研究结果是一致的。     

Effects of dynamic shear strength and time-histories stress analysis on newmark sliding block analyses

A simplified procedure for evaluating aseismic stability of slope subjected to earthquake shaking, in which the effect of dynamic shear strength and time-history stress on the yielding angular acceleration of sliding block is taken into account, is presented. The fundamental feature of this procedure is the dynamic shear strength. The numerical computations are performed by using the proposed method. It is shown that the computed sliding displacement for a given core dam, with either method of dynamic shear strength properly considered, is more rational compared with the conventional computational results based on static shear strength.     

Comparison of methods to model the gravitational gradients from topographic data bases

A number of methods have been developed over the last few decades to model the gravitational gradients using digital elevation data. All methods are based on second-order derivatives of the Newtonian mass integral for the gravitational potential. Foremost are algorithms that divide the topographic masses into prisms or more general polyhedra and sum the corresponding gradient contributions. Other methods are designed for computational speed and make use of the fast Fourier transform (FFT), require a regular rectangular grid of data, and yield gradients on the entire grid, but only at constant altitude. We add to these the ordinary numerical integration (in horizontal coordinates) of the gradient integrals. In total we compare two prism, two FFT and two ordinary numerical integration methods using 1" elevation data in two topographic regimes (rough and moderate terrain). Prism methods depend on the type of finite elements that are generated with the elevation data; in particular, alternative triangulations can yield significant differences in the gradients (up to tens of Eötvös). The FFT methods depend on a series development of the topographic heights, requiring terms up to 14th order in rough terrain; and, one popular method has significant bias errors (e.g. 13 Eötvös in the vertical–vertical gradient) embedded in its practical realization. The straightforward numerical integrations, whether on a rectangular or triangulated grid, yield sub-Eötvös differences in the gradients when compared to the other methods (except near the edges of the integration area) and they are as efficient computationally as the finite element methods.