天然气水合物体系动态演化研究（I）：地质历史演变

1995年Dickens对55．5Ma前古新世末增温事件进行了研究，提出天然气水合物作为全球环境变化重要因子的假说．认为古新世末增温事件溶解无机碳-2～-3‰的^13δC位移可以用水合物所含甲烷的释放与随后氧化成二氧化碳来解释．此后，地质历史演变中的天然气水合物演化研究蓬勃发展，本文总结古新世末增温事件、新元古代末期雪球事件、第四纪千年尺度事件等最新进展，为天然气水合物动态演化研究提供基础．开展天然气水合物-天然气体系动态演化过程数值模拟与特征分析，可望促进天然气水合物在全球变化与碳循环中作用的深入认识．     

Physical model for dynamic analysis of structures with FPS isolators

This article presents a physical model for frictional pendulum isolators (FPS) that is ready to be implemented in most commercial software. The model is capable of accounting for effects such as large deformations, sticking, and uplift and impact by sensing the normal loads in the isolators through a gap element. Sticking has been incorporated into the model by extending the Park–Wen hysteretic model to the case of large deformations. The proposed model has been tested against a theoretically ‘exact’ formulation leading to essentially identical results. To facilitate its use, the physical FPS model has been cast into a typical non‐linear structural element format, i.e. with deformation as input and restoring force as output. Examples of a building and a bridge have been chosen to show the potential of the element and to provide further insight into the earthquake response of structures with FPS isolators; in particular, in aspects such as the orientation in placement of the isolator, sticking, P? Δ, and other large deformation effects. Copyright © 2003 John Wiley & Sons, Ltd.     

Evaluation of predictors of non‐linear seismic demands using ‘fishbone’ models of SMRF buildings

Predictors (or estimates) of seismic structural demands that are less computationally time‐consuming than non‐linear dynamic analysis can be useful for structural performance assessment and for design. In this paper, we evaluate the bias and precision of predictors that make use of, at most, (i) elastic modal vibration properties of the given structure, (ii) the results of a non‐linear static pushover analysis of the structure, and (iii) elastic and inelastic single‐degree‐of‐freedom time‐history analyses for the specified ground motion record. The main predictor of interest is an extension of first‐mode elastic spectral acceleration that additionally takes into account both the second‐mode contribution to (elastic) structural response and the effects of inelasticity. This predictor is evaluated with respect to non‐linear dynamic analysis results for ‘fishbone’ models of steel moment‐resisting frame (SMRF) buildings. The relatively small number of degrees of freedom for each fishbone model allows us to consider several short‐to‐long period buildings and numerous near‐ and far‐field earthquake ground motions of interest in both Japan and the U.S. Before doing so, though, we verify that estimates of the bias and precision of the predictor obtained using fishbone models are effectively equivalent to those based on typical ‘full‐frame’ models of the same buildings. Copyright © 2003 John Wiley & Sons, Ltd.     

地震荷载作用下温度和围压对冻土强度影响的试验研究

通过对重塑冻结兰州黄土的动三轴试验，较系统研究了地震荷载作用下冻土的动强度特性，并且定量研究了其在不同温度(-2℃、-5℃、-7℃)和围压(1MPa、3MPa、5MPa)条件下的变化规律．结果发现：冻结黄土的动抗剪强度随围压的增大、温度的降低、振次的减少而增大；动粘聚力Cd随振次的减小和温度的降低而增大；动内摩擦角吼随振次的增大和温度的降低而增大。     

共线条件方程式教学中的几个问题

指出了共线条件方程式教学中应注意的一些问题：共线条件方程式是联立的两个平面方程式，存在双主距（fx,fy)时的几何概念，以及它的变换式与直接线性变换关系式的异同点。     

基于GIS和SD方法的社会经济发展与生态环境响应动态模拟预测研究

在着重于空间现象分析处理的GIS与动态模拟的SD方法结合的模式下，动态模拟预测了不同社会经济发展策略对生态环境的影响，揭示了生态经济系统社会经济发展与生态环境相互影响关系，为区域可持续发展提供决策支持服务。     

虚拟加工环境中的工件动态建模方法研究

提出并实现了基于平面纹理映射的基元立方体构造方法，以之为动态结点建立了动态八叉树结构，实现了支持变精度动态建模的自相似递归算法。该算法确保离正在加工的部位更近的区域有更高的精度，并采用C^ Builder和OpenGL构造了一个集成于虚拟加工环境的可加工工件模型。     

基于GPS基准站网的GPS测量

采用基于GPS基准网的GPS测量可以提高GPS测量的可靠性和准确性 ,可以消除和减小GPS测量观测值中与时间和空间相关的大气误差和轨道误差的影响 ,使中、长距离快速静态定位和RTK动态定位成为现实 ,还具有可直接得到WGS84Z坐标等优点。本文介绍基于GPS基准站网的GPS测量 ,简要地论述GPS虚拟参考站法VRS和区域改正数法FKP的原理、方法和特点 ,以及目前实施中存在的一些问题     

A simple test and predictive models for assessing swell potential of Ankara (Turkey) Clay

During the past three decades, damage due to swelling action of Ankara Clay has been observed more clearly in some parts of Ankara where rapid expansion of the city led to the construction of various kinds of structures. In this study, a comprehensive research program has been conducted (i) to investigate the effect of remoulding and desiccation on the swelling behavior of Ankara Clay and its swelling anisotropy, (ii) to estimate depth of active zone, (iii) to develop a simple technique in determining the magnitude of swelling based on water content of the soaked specimen after 24 and 72 h (w_max24,72), and (iv) to produce predictive models which could be used to estimate the swelling potential of Ankara Clay from its mineralogical and simply measured engineering characteristics. A laboratory testing program was carried out using both undisturbed, and remoulded and desiccated samples selected from 20 different locations. Montmorillonite was identified as being the main clay mineral present. Based on the moisture content variation with depth, the active expansive zone was considered to be about 2 m. The test results suggest that swelling pressure of the clay considerably decreases and/or dies out when the water content is greater than 30%. It is also noted that the measured lateral swelling is significantly in excess of the vertical equivalent indicating an anisotropy with respect to swelling. Statistical assessments indicate that a new parameter (w_max24,72) from a simple test, suggested in this study, is a very strong parameter for predicting swelling parameters of Ankara Clay. Based on 60 empirical predictive equations with coefficients of correlation between 0.96 and 0.66 from multiple regression analyses, w_max24,72, methylene blue value, liquid limit, dry unit weight and smectite content are the most important index and mineralogical properties to predict the swelling parameters of Ankara clay with small deviations from the measured values.     

基桩缺陷逐步能量恢复递推定量分析

通过大量正演计算,对不同桩周土条件下缺陷程度与时域速度响应波形中入射波波幅与反射波波幅的比值进行了相关性分析,拟合出桩侧土为粘土、砂土、粉土条件下桩径变化程度与波幅比之间的关系式。通过理论分析,在基桩存在多缺陷时,导出了缩颈与扩颈对下一个缺陷引起的反射波幅值的影响系数,进而,提出了逐步能量恢复递推缺陷程度的理论与方法,在时间域中,实现了基桩存在多缺陷时的低应变动测缺陷量化分析。模型桩试验分析结果表明,缺陷量化分析方法可取得显著效果。