水岩作用下泥质板岩软化非线性机制研究

水岩作用下泥质板岩表现出明显的软化特征。通过单轴压缩试验分析了泥质板岩软化过程中单轴压缩强度、弹性模量和泊松比与吸水时间之间的关系;借助核磁共振试验研究了水岩作用下泥质板岩软化过程中孔隙的产生、扩展和贯通规律,分析了泥质板岩软化过程中孔隙度与吸水时间之间的关系;采用电镜扫描试验分析了水岩作用下泥质板岩软化过程中微观结构的演变规律,基于分形理论研究了不同浸泡时间下泥质板岩分形维数的变化规律;运用非线性动力学理论,选取微观结构孔隙形状分维值、孔隙度、单轴抗压强度、弹性模量作为描述泥质板岩与水溶液相互作用系统的变量,建立了水岩作用下泥质板岩的软化模型,结合试验数据验证了模型的适用性。结果表明:泥质板岩单轴抗压强度、弹性模量随吸水时间增大而减小,呈负线性相关,而泊松比与吸水时间之间的关系不明显;在浸泡初期,水岩作用强烈,泥质板岩内部微孔隙会发生扩展贯通进而形成更大尺寸的孔隙,孔隙度在浸泡初期增长较快;随着浸泡时间的延长,水岩作用减弱,孔隙度增长速率趋缓;随着吸水时间的推移,泥质板岩内部孔隙相互连通,进而形成复杂网状结构的大孔,泥质板岩分形维数呈对数增长,最终趋于稳定;采用非线性模型计算的结果与...     

Dynamic storage: a potential metric of inter‐basin differences in storage properties

The potential for dynamic storage to serve as a metric of basin behaviour was assessed using data from five drainage basins with headwaters on the thick sand and gravel deposits of the Oak Ridges Moraine in southern Ontario, Canada. Dynamic storage was directly correlated with the ratio of variability of δ²H in streamflow relative to that in precipitation. This ratio has previously been shown to be inversely related to basin mean transit time (MTT), suggesting an inverse relationship between dynamic storage and MTT for the study basins. Dynamic storage was also directly correlated with interannual variability in stream runoff, baseflow and baseflow:runoff ratio, implying that basins with smaller dynamic storage have less interannual variability in their streamflow regimes. These preliminary results suggest that dynamic storage may serve as a readily derived and useful metric of basin behaviour for inter‐basin comparisons. Copyright © 2016 John Wiley & Sons, Ltd.     

Elastic lateral dynamic impedance functions for a rigid cylindrical shell type foundation

Elastic lateral dynamic impedance functions are defined as the ratio of the lateral dynamic force/moment to the corresponding lateral displacement/rotation at the top ending of a foundation at very small strains. Elastic lateral dynamic impedance functions have a defining influence on the natural frequencies of offshore wind turbines supported on cylindrical shell type foundations, such as suction caissons, bucket foundations, and monopiles. This paper considers the coupled horizontal and rocking vibration of a cylindrical shell type foundation embedded in a fully saturated poroelastic seabed in contact with a seawater half‐space. The formulation of the coupled seawater–shell–seabed vibration problem is simplified by treating the shell as a rigid one. The rigid shell vibration problem is approached by the integral equation method using ring‐load Green's functions for a layered seawater‐seabed half‐space. By considering the boundary conditions at the shell–soil interface, the shell vibration problem is reduced to Fredholm integral equations. Through an analysis of the corresponding Cauchy singular equations, the intrinsic singular characteristics of the problem are rendered explicit. With the singularities incorporated into the solution representation, an effective numerical method involving Gauss–Chebyshev method is developed for the governing Fredholm equations. Selected numerical results for the dynamic contact load distributions, displacements of the shell, and lateral dynamic impedance functions are examined for different shell length–radius ratio, poroelastic materials, and frequencies of excitation. Copyright © 2016 John Wiley & Sons, Ltd.     

Dynamic analysis of strain localization in water‐saturated clay using a cyclic elasto‐viscoplastic model

A computational framework is presented for dynamic strain localization and deformation analyses of water‐saturated clay by using a cyclic elasto‐viscoplastic constitutive model. In the model, the nonlinear kinematic hardening rule and softening due to the structural degradation of soil particles are considered. In order to appropriately simulate the large deformation phenomenon in strain localization analysis, the dynamic finite element formulation for a two‐phase mixture is derived in the updated Lagrangian framework. The shear band development is shown through the distributions of viscoplastic shear strain, the axial strain, the mean effective stress, and the pore water pressure in a normally consolidated clay specimen. From the local stress–strain relations, more brittleness is found inside the shear bands than outside of them. The effects of partially drained conditions and mesh‐size dependency on the shear banding are also investigated. The effect of a partially drained boundary is found to be insignificant on the dynamic shear band propagation because of the rapid rate of applied loading and low permeability of the clay. Using the finer mesh results in slightly narrower shear bands; nonetheless, the results manifest convergency through the mesh refinement in terms of the overall shape of shear banding and stress–strain relations. Copyright © 2013 John Wiley & Sons, Ltd.     

Dynamic response of a pile considering the interaction of pile variable cross section with the surrounding layered soil

Assuming that the pile variable cross section interacts with the surrounding soil in the same way as the pile toe does with the bearing stratus, the interaction of pile variable cross section with the surrounding soil is represented by a Voigt model, which consists of a spring and a damper connected in parallel, and the spring constant and damper coefficient are derived. Thus, a more rigid pile–soil interaction model is proposed. The surrounding soil layers are modeled as axisymmetric continuum in which its vertical displacements are taken into account and the pile is assumed to be a Rayleigh–Love rod with material damping. Allowing for soil properties and pile defects, the pile–soil system is divided into several layers. By means of Laplace transform, the governing equations of soil layers are solved in frequency domain, and a new relationship linking the impedance functions at the variable‐section interface between the adjacent pile segments is derived using a Heaviside step function, which is called amended impedance function transfer method. On this basis, the impedance function at pile top is derived by amended impedance function transfer method proposed in this paper. Then, the velocity response at pile top can be obtained by means of inverse Fourier transform and convolution theorem. The effects of pile–soil system parameters are studied, and some conclusions are proposed. Then, an engineering example is given to confirm the rationality of the solution proposed in this paper. Copyright © 2017 John Wiley & Sons, Ltd.     

临震前地壳变形不动点现象与机制研究

在综合分析国内外地形变前兆研究现状的基础上,结合汶川8.0级地震前GPS、应变、重力等研究结果,提出临震前震源区域可能出现变形不动点现象。地壳变形过程中的不动点现象是临震前区域应力场进入临界状态的重要标志,是地震潜在危险区域划定的重要依据。借助不动点理论,给出汶川地震前变形不动点集合的演化,结合大区域地震活动空区与远场显著形变异常分布,探讨变形不动点现象发生的动力学背景,验证了汶川地震前地壳变形的不动点现象是大区域应力场有序运动的结果。     

Modelling landslides in unsaturated slopes subjected to rainfall infiltration using material point method

This paper presents a dynamic fully coupled formulation for saturated and unsaturated soils that undergo large deformations based on material point method. Governing equations are applied to porous material while considering it as a continuum in which the pores of the solid skeleton are filled with water and air. The accuracy of the developed method is tested with available experimental and numerical results. The developed method has been applied to investigate the failure and post‐failure behaviour of rapid landslides in unsaturated slopes subjected to rainfall infiltration using two different bedrock geometries that lie below the top soil. The models show different failure and post‐failure mechanisms depending on the bedrock geometry and highlight the negative effects of continuous rain infiltrations. Copyright © 2016 John Wiley & Sons, Ltd.     

超高层建筑GPS实时动态监测技术研究

在特高等级精密工程的测量范畴内,实现对超高层建筑的施工监测是一个非常重要的工作内容,GPS实时动态监测技术在监测中发挥着不可忽视的作用。本文首先对GPS监测技术做简要阐述,并分析了超高层建筑的特点;然后指出了GPS监测技术在施工监测中所发挥的作用;最后结合案例,具体分析了GPS监测技术在超高层建筑中的应用,以期为超高层建筑GPS实时动态监测技术的相关研究提供部分参考意见。     

2000～2015年会理县地表覆盖变化监测

以LandSat多时相影像为数据源,采用基于规则的面向对象分类方法,监测会理县2000～ 2015年地表覆盖变化.结合1∶50 000 DEM数据,分析了会理县地表覆盖构成与转移、变化动态度及潜在退耕地情况.监测分析结论能为会理县加强空间管制、促进土地资源集约利用、指导生态文明建设等提供决策信息支撑.     

Incorporation of a dynamic root distribution into CLM4.5: Evaluation of carbon and water fluxes over the Amazon

Roots are responsible for the uptake of water and nutrients by plants and have the plasticity to dynamically respond to different environmental conditions. However, most land surface models currently prescribe rooting profiles as a function only of vegetation type, with no consideration of the surroundings. In this study, a dynamic rooting scheme, which describes root growth as a compromise between water and nitrogen availability, was incorporated into CLM4.5 with carbon–nitrogen(CN) interactions(CLM4.5-CN) to investigate the effects of a dynamic root distribution on eco-hydrological modeling. Two paired numerical simulations were conducted for the Tapajos National Forest km83(BRSa3) site and the Amazon, one using CLM4.5-CN without the dynamic rooting scheme and the other including the proposed scheme. Simulations for the BRSa3 site showed that inclusion of the dynamic rooting scheme increased the amplitudes and peak values of diurnal gross primary production(GPP) and latent heat flux(LE) for the dry season, and improved the carbon(C) and water cycle modeling by reducing the RMSE of GPP by 0.4 g C m~(-2)d~(-1), net ecosystem exchange by 1.96 g C m~(-2)d~(-1), LE by 5.0 W m~(-2), and soil moisture by 0.03 m~3m~(-3), at the seasonal scale, compared with eddy flux measurements, while having little impact during the wet season. For the Amazon, regional analysis also revealed that vegetation responses(including GPP and LE) to seasonal drought and the severe drought of 2005 were better captured with the dynamic rooting scheme incorporated.