Depositional processes,bedform development and hybrid bed formation in rapidly decelerated cohesive (mud–sand) sediment flows

Flows with high suspended sediment concentrations are common in many sedimentary environments, and their flow properties may show a transitional behaviour between fully turbulent and quasi‐laminar plug flows. The characteristics of these transitional flows are known to be a function of both clay concentration and type, as well as the applied fluid stress, but so far the interaction of these transitional flows with a loose sediment bed has received little attention. Information on this type of interaction is essential for the recognition and prediction of sedimentary structures formed by cohesive transitional flows in, for example, fluvial, estuarine and deep‐marine deposits. This paper investigates the behaviour of rapidly decelerated to steady flows that contain a mixture of sand, silt and clay, and explores the effect of different clay (kaolin) concentrations on the dynamics of flow over a mobile bed, and the bedforms and stratification produced. Experiments were conducted in a recirculating slurry flume capable of transporting high clay concentrations. Ultrasonic Doppler velocity profiling was used to measure the flow velocity within these concentrated suspension flows. The development of current ripples under decelerated flows of differing kaolin concentration was documented and evolution of their height, wavelength and migration rate quantified. This work confirms past work over smooth, fixed beds which showed that, as clay concentration rises, a distinct sequence of flow types is generated: turbulent flow, turbulence‐enhanced transitional flow, lower transitional plug flow, upper transitional plug flow and a quasi‐laminar plug flow. Each of these flow types produces an initial flat bed upon rapid flow deceleration, followed by reworking of these deposits through the development of current ripples during the subsequent steady flow in turbulent flow, turbulence‐enhanced transitional flow and lower transitional plug flow. The initial flat beds are structureless, but have diagnostic textural properties, caused by differential settling of sand, silt and cohesive mud, which forms characteristic bipartite beds that initially consist of sand overlain by silt or clay. As clay concentration in the formative flow increases, ripples first increase in mean height and wavelength under turbulence‐enhanced transitional flow and lower transitional plug‐flow regimes, which is attributed to the additional turbulence generated under these flows that subsequently causes greater lee side erosion. As clay concentration increases further from a lower transitional plug flow, ripples cease to exist under the upper transitional plug flow and quasi‐laminar plug flow conditions investigated herein. This disappearance of ripples appears due to both turbulence suppression at higher clay concentrations, as well as the increasing shear strength of the bed sediment that becomes more difficult to erode as clay concentration increases. The stratification within the ripples formed after rapid deceleration of the transitional flows reflects the availability of sediment from the bipartite bed. The exact nature of the ripple cross‐stratification in these flows is a direct function of the duration of the formative flow and the texture of the initial flat bed, and ripples do not form in cohesive flows with a Reynolds number smaller than ca 12 000. Examples are given of how the unique properties of the current ripples and plane beds, developing below decelerated transitional flows, could aid in the interpretation of depositional processes in modern and ancient sediments. This interpretation includes a new model for hybrid beds that explains their formation in terms of a combination of vertical grain‐size segregation and longitudinal flow transformation.     

Complex variations in sediment transport at three large river bifurcations during discharge waves in the river Rhine

River bifurcations strongly control the distribution of water and sediment over a river system. A good understanding of this distribution process is crucial for river management. In this paper, an extensive data set from three large bifurcations in the Dutch Rhine is presented, containing data on bed‐load transport, suspended bed sediment transport, dune development and hydrodynamics. The data show complex variations in sediment transport during discharge waves. The objective of this paper is to examine and explain these measured variations in sediment transport. It is found that bend sorting upstream of the bifurcations leads to supply limitation, particularly in the downstream branch that originates in the outer bend of the main channel. Tidal water level variations lead to cyclical variations in the sediment distribution over the downstream branches. Lags in dune development cause complex hysteresis patterns in flow parameters and sediment transport. All bifurcations show evidence of sediment waves, which probably are intrinsic bifurcation phenomena. The complex transport processes at the three bifurcations cause distinct discontinuities in the downstream fining trend of the river. Differences among the studied river bifurcations are mainly due to differences in sediment mobility (Shields value). Because the variations in sediment transport are complex and poorly correlated with the flow discharge, prediction of the sediment distribution with existing relationships for one‐dimensional models is problematic.     

Pyroclastic dune bedforms: macroscale structures and lateral variations. Examples from the 2006 pyroclastic currents at Tungurahua (Ecuador)

Pyroclastic currents are catastrophic flows of gas and particles triggered by explosive volcanic eruptions. For much of their dynamics, they behave as particulate density currents and share similarities with turbidity currents. Pyroclastic currents occasionally deposit dune bedforms with peculiar lamination patterns, from what is thought to represent the dilute low concentration and fluid‐turbulence supported end member of the pyroclastic currents. This article presents a high resolution dataset of sediment plates (lacquer peels) with several closely spaced lateral profiles representing sections through single pyroclastic bedforms from the August 2006 eruption of Tungurahua (Ecuador). Most of the sedimentary features contain backset bedding and preferential stoss‐face deposition. From the ripple scale (a few centimetres) to the largest dune bedform scale (several metres in length), similar patterns of erosive‐based backset beds are evidenced. Recurrent trains of sub‐vertical truncations on the stoss side of structures reshape and steepen the bedforms. In contrast, sporadic coarse‐grained lenses and lensoidal layers flatten bedforms by filling troughs. The coarsest (clasts up to 10 cm), least sorted and massive structures still exhibit lineation patterns that follow the general backset bedding trend. The stratal architecture exhibits strong lateral variations within tens of centimetres, with very local truncations both in flow‐perpendicular and flow‐parallel directions. This study infers that the sedimentary patterns of bedforms result from four formation mechanisms: (i) differential draping; (ii) slope‐influenced saltation; (iii) truncative bursts; and (iv) granular‐based events. Whereas most of the literature makes a straightforward link between backset bedding and Froude‐supercritical flows, this interpretation is reconsidered here. Indeed, features that would be diagnostic of subcritical dunes, antidunes and ‘chute and pools’ can be found on the same horizon and in a single bedform, only laterally separated by short distances (tens of centimetres). These data stress the influence of the pulsating and highly turbulent nature of the currents and the possible role of coherent flow structures such as Görtler vortices. Backset bedding is interpreted here as a consequence of a very high sedimentation environment of weak and waning currents that interact with the pre‐existing morphology. Quantification of near‐bed flow velocities is made via comparison with wind tunnel experiments. It is estimated that shear velocities of ca 0·30 m.s^?1 (equivalent to pure wind velocity of 6 to 8 m.s^?1 at 10 cm above the bed) could emplace the constructive bedsets, whereas the truncative phases would result from bursts with impacting wind velocities of at least 30 to 40 m.s^?1.     

石英光释光测年揭示的晚第四纪毛乌素沙地演化

本研究利用石英光释光测年的单片再生法(Single­aliquot Regenerative­dose Protocol,简称SAR)对毛乌素沙地内部西北－东南方向5个风成砂－砂质古土壤剖面进行了年代测定,结合年代框架和剖面沉积相、磁化率及粒度特征探讨了晚第四纪以来毛乌素沙地演化和气候变化。研究表明毛乌素沙地在晚第四纪以来经历了多次沙地固定与活化的交替演化： 距今91.0ka,71.0ka,48.0ka,22.0ka,11.6ka,5.0ka,1.1ka,1.0ka和0.4ka前后风成砂沉积,沙地活化,指示气候干旱,植被覆盖度低; 在距今65ka和全新世适宜期(8.5～5.0ka),沙地固定成壤,砂质古土壤发育,指示气候湿润。另外,剖面中风成砂层数变多、厚度增加、粒径变粗指示了晚第四纪以来毛乌素沙地干旱化趋势加强。     

Intertidal clay-drape couplets (Gironde estuary, France)

Clay-drape couplets on subaqueous dunes have been regarded as a diagnostic feature of the subtidal environment since Visser's seminal paper (1980). The new observation of clay-drape couplets in the intertidal zone on a present day tidal bar of the Gironde estuary shows that they are not restricted to the subtidal zone.
In the intertidal zone, low-tide slack-water clay drapes are deposited in the bottomsets of the dominant current dunes when the muddy water retained in the troughs is absorbed into the sand during the emergence of the intertidal bar. They drape emergence run-off ripples generated by the drainage currents in the bottomsets. High-tide slack-water clay drapes are deposited over the entire dune surface and are preserved on the lee side of the dunes and in the bottomsets. They drape the subordinate current ripples. Low-tide and high-tide slack-water clay drapes enclose one thin rippled sand layer (the subordinate current bundle) and are isolated from other adjacent clay-drape couplets by the dominant current bundle.
The clay-drape couplets deposited in the intertidal zone can be distinguished from their subtidal counterparts on the basis of two morphological differences:
1. In the intertidal zone, the low-tide clay drape is only present in the bottomsets of the dunes, whereas in the subtidal zone equivalent clay drapes are also present on the lower part of the lee side of the dunes.
2. In the intertidal zone, low-tide clay drapes are deposited in the bottomsets of the dunes over emergence run-off ripples oriented in the direction of the drainage currents (i.e. in a direction normal to the tidal currents). Conversely, in the subtidal zone, the equivalent clay drapes are typically deposited over ripples oriented in the tidal-current direction (ebb or flood). There is a difference of polarity of 90° between the intertidal and subtidal small-scale bedforms draped by the low-tide slack-water drapes.     

Grain-size sorting in grainflows at the lee side of deltas

The sorting of sediment mixtures at the lee slope of deltas (at the angle of repose) is studied with experiments in a narrow, deep flume with subaqueous Gilbert-type deltas using varied flow conditions and different sediment mixtures. Sediment deposition and sorting on the lee slope of the delta is the result of (i) grains falling from suspension that is initiated at the top of the delta, (ii) kinematic sieving on the lee slope, (iii) grainflows, in which protruding large grains are dragged downslope by subsequent grainflows. The result is a fining upward vertical sorting in the delta. Systematic variations in the trend depend on the delta height, the migration celerity of the delta front and the flow conditions above the delta top. The dependence on delta height and migration celerity is explained by the sorting processes in the grainflows, and the dependence on flow conditions above the delta top is explained by suspension of fine sediment and settling on the lee side and toe of the delta. Large differences in sorting trends were found between various sediment mixtures. The relevance of these results with respect to sorting in dunes and bars in rivers and laboratory flumes is discussed and the elements for a future vertical sorting model are suggested.     

床面粗糙形态的二元分形插值模拟

针对床面粗糙形态具有自相似性的特点,应用二元分形插值迭代函数系统,对床面粗糙形态进行了分形插值模拟,模拟中分形插值邻域Ak根据Kriging空间插值方法的变异函数球状模型确定,垂直比例因子sm,n通过基于插值点数据的多元统计分析确定.结果表明:分形插值重构的床面粗糙形态与原床面形态的相似程度将随着插值点信息量ic的增加...     

Aeolian landform processes since the last deglaciation revealed by OSL chronology and stratigraphy in the Hulunbuir dune field in NE China

The Hulunbuir dune field (HLB) is situated near the northern limit of the East Asian summer monsoon (EASM), and vulnerable to climate change. The aeolian sand–paleosol sequences of this region are crucial for understanding the past landform processes in response to climate change, but not yet understood well due to chronological controversies. Here, we presented 20 optically stimulated luminescence (OSL) ages from five aeolian sand–paleosol profiles in the HLB, and reconstructed the aeolian landform processes since 18 ka. The findings of this study suggested that the HLB was probably dominated by mobile dunes before 18 ka, as 10 out of 11 aeolian samples were dated to 18–12 ka. Two strong sandy paleosol layers were found and dated to ∼9 ka and 5–0.5 ka, indicating that strong in situ pedogenic process on the accumulative sand could occur during the Holocene. The OSL ages of samples near the top of three profiles were >9.5 ka, indicating two possible surface processes. First, the land surface was stable since 9.5 ka after stabilization, with no accumulation or erosion. Alternatively, the surface could have been erosive with the eroded sediments feeding downwind active dunes. The latter explanation is consistent with the current local landforms, which has widespread blowout pits, indicators of strong wind erosion. We emphasized that the OSL age of a sand layer sample in fossil dunes implied the onset of mobile dune stabilization, not the age of dune activity, as previously stated.     

海岸沙丘系统脆弱性评价研究进展与展望

海岸沙丘系统脆弱性评价揭示海岸沙丘系统脆弱性的基本特征,为海岸沙丘保护与利用提供重要依据,是海岸沙丘研究近期备受关注的一个重要方面。论文基于国内外海岸沙丘系统脆弱性评价研究相关概念、发展历程、评价指标及技术方法等的回顾,概括了其在概念内涵深化、指标体系完善、脆弱性因子辨识、技术方法发展以及评价结果应用等方面的主要进展;并针对当前概念定义难以共识、指标体系争议较大、评价方法存在局限性和理论基础略显薄弱等研究不足,提出明晰相关概念、完善指标体系、改进评价方法、强化机理研究及增强趋势研判等海岸沙丘系统脆弱性近期研究的主要方向。     

金字塔沙丘流场的三维数值模拟

对位于敦煌莫高窟顶部鸣沙山东麓的金字塔沙丘流场形态进行数值模拟,分析了多风向条件下沙丘的压力场和速度场变化规律。使用地面立体摄影技术获取沙丘的控制点坐标,建立了与实地沙丘等比例的三维模型,以解决二维建模不能表达3组主风向差异的问题。使用计算流体动力学（CFD）方法,采用非结构网格划分技术以适应沙丘的高度不规则地形,通过剪切压力传输模型（SST）分析计算并与以往风洞试验和数值模拟结果进行对比。模型很好地预测了沙丘底部停滞区、坡上加速区、背风坡回流区以及沙丘表面压力和风速分布等流场信息,反映了多风向条件下沙丘形态与气流的交互作用。流场中速度场的分布与压力分布直接相关。