La plate-forme carbonatée oxfordienne de Lorraine : arguments pour une ouverture vers la mer Germanique

The study of sedimentary facies in the quarry of Dompcevrin (Middle Oxfordian) located northwestward of St-Mihiel (Meuse department) provides evidences of high-energy depositional conditions. The occurrence of beaches associated with hurricane coral breccias containing megaclasts is characteristic of platform edge environments. The open sea was located northeastward, in the direction of Germany, as it is indicated by the direction of progradation of beaches. It is concluded that the Oxfordian carbonate platform of Lorraine was opened to the northeast toward the Germanic Sea during the Middle Oxfordian. To cite this article: C. Carpentier et al., C. R. Geoscience 336 (2004).     

How reliable are growth strata in interpreting short-term (10 s to 100 s ka) growth structures kinematics?

High-frequency stratigraphic cycles (10 s to 100 s ka) often show, at a specific location, an alternation of ‘dynamic’ (proximal-energetic), and ‘non-dynamic’ (distal-pelagic) processes with time. When sedimentation is syn-deformation, these processes tend respectively to fill-up tectonically-induced topography or to drape it. As a consequence, growth strata are alternatively thickened and isopach across the growth structure. High-resolution kinematic studies of growth structures (folds and faults), which assume that sedimentation always fills up topographies (‘fill-to-the-top’ model), may therefore mistake sedimentary cyclicity for tectonic cyclicity. We address this problem with one example of growth anticline in the Spanish Pyrenees, and we discuss the fill-to-the-top model. To cite this article: S. Castelltort et al., C. R. Geoscience 336 (2004).     

Ductile shear zones on carbonates: the calcaires plaquettés of northern Calabria (Italy)

Field, petrographic and quantitative strain analysis have been performed on highly foliated limestones outcropping in northern Calabria and generally attributed to two distinct units (San Donato and Pollino) on the basis of presence/absence of metamorphism. The deformation, however, is comparable in all the studied outcrops indicating that the widely accepted distinction of units in the area should be revised. Deformation is very localized in narrow ductile shear-zones affecting Tertiary conglomerates and Jurassic oncoidal packstones. The former are more strained because of their closeness to siliciclastic beds. The main deformation mechanism was grain boundary sliding with minor intragranular strain and pressure solution. To cite this article: A. Iannace, S. Vitale, C. R. Geoscience 336 (2004).     

Ennoyage des mines de fer lorraines : impact sur la qualité de l'eau

The flooding of the abandoned iron mines of Lorraine leads to a degradation of the groundwater quality. Laboratory experiments allowed us to build a kinetic chemical model based on simple chemical mechanisms. During mining operations, pyrite oxidation and carbonate dissolution lead to the precipitation of gypsum. The local decrease of pH favours local dissolutions of minerals and releases ions that are fixed on cationic exchange sites. During the flooding of the mine workings, the dissolution of the newly precipitated gypsum, the precipitation of carbonates and cationic exchange reactions are responsible for the increase of the concentrations of sulphate, magnesium, sodium, potassium and strontium in water. Thereafter, these concentrations would decrease with the natural leaching of the mining reservoir. To cite this article: P. Collon et al., C. R. Geoscience 336 (2004).     

Thermal effects of massive CO2 emissions associated with subduction volcanism

Large volumes of CO₂ are emitted during volcanic activity at convergent plate boundaries, not only from volcanic centres. Their C isotopic signature indicates that this CO₂ is mainly derived from the decarbonation of subducted limestones or carbonated metabasalts, not as often admitted from magma degassing. On the example of Milos (Aegean Sea) it is argued that these fluids originate from intermediate depth in the mantle and carry sufficient heat to account for the generation of subduction-related magmas, as well as for the geothermal manifestations at the surface. The heat that is required for the decarbonation reactions is drawn by conduction from a wide zone surrounding the subducting slab and then rapidly transported upward by convection of the mixed CO₂–H₂O fluids that originate from the sediments in the slab. The transport takes place in a focused way through ‘chimneys’ in the upper mantle, where magmas are generated by the introduced heat and water. In the crust, the hot fluids cause thermal-dome-type metamorphism. In volcanic areas, magmas are commonly held responsible for the major part of heat transfer from the mantle to the surface. Here it is argued that most of the heat transfer is by hot gases. To cite this article: R.D. Schuiling, C. R. Geoscience 336 (2004).     

Diachronisme des bassins turbiditiques d'avant-pays méso/néocrétacés du pays de Sault (Aude,Pyrénées françaises)

The cartographic, sedimentological and micropalaeontological analysis of remnants of Middle–Upper Cretaceous turbiditic basins from the ‘Pays de Sault’ (Aude, French Pyrenees) shows their diachronism (interpreted on a wider scale) and their sequence diversity. The ‘Gesse breccias’ are regarded as the proximal deposits of a Turonian narrow foreland basin, principally supplied by the erosion of the Jurassic–Lower Cretaceous cover of the High Primary Range to the south, induced by a strike-slip and overthrusting faulting within the en-échelon North-Pyrenean Fault Zone. More to the north, the North-Pyrenean ‘Axat Basin’ consists of two successive backstepping turbiditic wedges, respectively corresponding to an Upper Albian distal flysch and to a Middle–Upper Cenomanian more proximal flysch, all the series unconformably overlying structures that were folded then eroded before the Upper Albian. The previous concept of carbonate olistoliths included within the Axat Cenomanian flysch is also refuted: these large-size blocks are now interpreted as belonging to a tectonic slice destroyed and partly collapsed on the southern slope of the Rebenty Valley during the Quaternary. To cite this article: M.-J. Fondecave-Wallez, B. Peybernès, C. R. Geoscience 336 (2004).     

Apport de la modélisation géophysique pour la compréhension de la structuration du pas de Calais

This study is based on an analysis of seismic, gravimetric and magnetic data to model the structure of the Dover Straits area. The Dover Straits are set in a transitional position within the Brabant para-autochthon, which lies between the Ardennes allochthon to the south and the Brabant Massif to the north. The seismic profiles show that this area is characterised by several superimposed Mesozoic basins, whose evolution has been controlled by the reactivation of Lower Palaeozoic faults. In common with the adjacent Weald–Wessex and southern North Sea basins, the Dover Straits area records a Jurassic extensional phase and a post-Cretaceous tectonic inversion. The geophysical modelling reveals the presence of a basement to these Mesozoic basins that exhibits Ordovician to Silurian structures, which cannot be detected on the seismic reflection profiles. In contrast to earlier interpretations, the modelling presented here suggests that the Brabant Massif continues southward beyond the Dover Straits and under the Brabant para-autochthon. Gravity data also provides evidence for the presence of granitic body at depth, in the vicinity of Km 27 on the seismic profile, which may have driven the uplift of the Silurian rocks in the area of the Straits. Similar granitic intrusions have been proposed to explain gravity anomalies along the Rhenohercynian Margin in Belgium, eastern and southern England. The geophysical modelling demonstrates the continuity of the basement and Mesozoic basin structures across the Dover Straits, suggesting a common geological evolution of the adjacent southern England–northern France regions. To cite this article: B. Minguely et al., C. R. Geoscience 337 (2005).     

Effets de la vitesse d'écoulement sur le transport et la cinétique de dépôt de particules en suspension en milieu poreux saturé

We study in this paper the transport and deposition of suspended particles in saturated porous media. Some chromatographic short-pulse tests were performed in a laboratory column with a tracer and two types of suspended particles. A mathematical model was used to determine the hydrodispersive parameters and deposition rates from the breakthrough curves. The results show that the fitted parameters obtained vary with the flow rate and the characteristics of the suspended particles. We also observe, at high flow rates, that particles have a migration velocity higher than that of the conservative tracer. To cite this article: A. Benamar et al., C. R. Geoscience 337 (2005).     

Premières datations de feux holocènes dans les Monts de Saint-Guilhem-le-Désert (Hérault,France), contribution à l'histoire de la forêt relique de Pinus nigra Arnold ssp Salzmanni (Dun.) Franco

The charcoal discovery in the soils and sediments of the relic forest of Pinus nigra ssp Salzmanni near Saint-Guilhem-le-Désert allows us to establish a chronology of Holocene fires. Their origin dates from the Middle Holocene, but they are especially significant after the construction of the medieval abbey during the 9th century. The original pine plantation was heterogeneous, with another pine, Pinus sylvestris, which has now been eradicated. Changes in the fire modes have been observed, recent human fires being generalized, which resulted in a significant regression of the forest cover, which was replaced by box-tree formations. To cite this article: J.-L. Vernet et al., C. R. Geoscience 337 (2005).     

Large earthquake-triggered landslides and mountain belt erosion: The Tsaoling case,Taiwan

The 1999 Chi-Chi earthquake triggered the catastrophic Tsaoling landslide in central Taiwan. We mapped the landslide area and estimated the landslide volume, using high-resolution digital elevation model from airborne LiDAR (Light Detection and Ranging), satellite images, aerial photographs and topographic maps. The comparison between cut and fill volumes, about 0.126 and 0.150 km³, respectively, suggests a volume increase of 19% due to decompaction during landsliding. In April 2002, the cut and fill volumes were about 0.137 and 0.116 km³, respectively. These estimates suggest that 2.5 years after the event, the volume of landslide debris removed by river erosion was nearly 0.045 km³. Such a large value highlights the importance of landslide processes for erosion and long-term denudation in the Taiwan mountain belt. To cite this article: R.-F. Chen et al., C. R. Geoscience 337 (2005).