Analytical and experimental investigations on seismic performance of exterior beam–column subassemblages of existing RC‐framed building

Seismic performance of exterior beam–column subassemblages of reinforced concrete structure designed and detailed on the basis of the provisions of Eurocode and Indian Standards at different stages of their evolution is evaluated. Performance of the subassemblages designed and detailed according to the three different stages of codal evolution (gravity load design, ‘Nonductile’, and ‘Ductile’) is evaluated through analytical formulations and experimental investigations. In the ‘NonDuctile’ specimens, it has been observed that the shear distortion and degradation in stiffness and strength are significantly high. Performance of the ‘Ductile’ specimens based on Eurocode and Indian Standards is almost similar in terms of strength and stiffness degradation. Nevertheless, the specimen designed on the basis of Indian Standard shows higher energy dissipation at a given drift ratio. In the analytical study, shear and flexural failure of members of subassemblage and shear failure of the joint are considered as possible modes of failure of the beam–column subassemblage. For evaluating the shear strength of the joint region, a soften strut‐and‐tie model is used. Analytically obtained strengths based on the failure criteria of different components of the specimens have been first validated with experimental results and then used to determine the strength of the specimens. The investigation could indicate even the mode of failure at local level. It is utmost important to mention here that even the ductile specimens dissipate most of the energy through the development of damage in the joint region, which is neither desirable nor safe for the stability of whole structure. Copyright © 2013 John Wiley & Sons, Ltd.     

河南桐柏歇马岭金矿床地质特征及找矿标志

通过对歇马岭金矿地质特征和矿化富集规律的初步分析,提出了找矿标志和找矿模型,对矿区及外围进一步找矿提供了思路.     

A macroscopic damage‐plastic constitutive law for modeling quasi‐brittle fracture and ductile behavior of concrete

A new phenomenological macroscopic constitutive model for the numerical simulation of quasi‐brittle fracture and ductile concrete behavior, under general triaxial stress conditions, is presented. The model is particularly addressed to simulate a wide range of confinement stress states, as also, to capture the strong influence of the mean stress value in the concrete failure mechanisms. The model is based on a two‐surface damage‐plastic formulation. The mechanical behavior in different domains of the stress space is separately described by means of a quasi‐brittle or ductile material response:

相似文献   

Kinematics of the Guerrero terrane accretion in the Sierra de Guanajuato,central Mexico: new insights for the structural evolution of arc–continent collisional zones

The Guerrero terrane comprises Middle Jurassic–Early Cretaceous arc successions that were accreted to the North American craton in the late Early Cretaceous, producing closure of the Arperos oceanic basin and the formation of an approximately 100 km-wide fold–thrust belt. Such a suture is key to investigating the structural evolution related to Guerrero terrane accretion and, in general, to arc–continent collisional zones. The Sierra de Guanajuato is an exposure of the Guerrero terrane suture belt and consists of a complex tectonic pile that formed through at least three major shortening phases: D1SG, D2SG, and D3SG (SG, Sierra de Guanajuato). During the D1SG and D2SG phases, the Upper Jurassic–Lower Cretaceous successions of the Arperos Basin piled up, forming a doubly vergent imbricate fan of thrust sheets that accommodated substantial NE–SW shortening. Mylonite microtextures, as well as syntectonic minerals, indicate that the D1SG and D2SG deformation events took place under low greenschist-facies metamorphic conditions. We relate these deformation phases to the progressive NE migration of the Guerrero terrane, which triggered the collapse and closure of the Arperos Basin. During D3SG, the El Paxtle arc assemblage of the Guerrero terrane was tectonically emplaced onto the previously deformed successions of the Arperos Basin. However, D3SG structures indicate that during this deformational stage, the main shortening direction was oriented NW–SE and that contraction was accommodated mostly by SE-vergent ductile thrusts formed under low greenschist-facies metamorphic conditions. We suggest that the top-to-the-SE emplacement of the El Paxtle assemblage may be a result of the tectonic escape of the arc produced by the continuous NE impingement of the Guerrero terrane during its collisional addition to the Mexican mainland.     

城市高架桥合理抗震体系选择与经济性对比

探讨了基于两水准设防的城市高架桥的合理抗震设防标准与相应的结构性能目标.选取两座典型的城市高架桥结构,包括一座正线桥和一座匝道桥,分别采用延性抗震体系和减、隔震体系进行结构抗震设计.对比了不同结构抗震体系所对应的结构在各水准地震作用下具体抗震性能表现,结果表明减、隔震体系具有更优的抗震性能.在此基础上,进一步从经济性的...     

中天山东部南北两缘韧性剪切带变形特征

(1)中天山北缘韧性剪切带除右旋韧剪变形之外,还发育相对较弱的左旋韧剪变形,局部残留加里东晚期的逆冲推覆韧剪变形;右旋韧剪变形的变形温度环境为中-低温,左旋韧剪变形的变形温度环境为高温、中温、中低温及低温。(2)中天山南缘韧性剪切带以右旋韧剪变形为主,兼具左旋韧剪变形;右旋韧剪变形的变形温度环境为中温、中低温、低温,左旋韧剪变形的变形温度环境为高温、中温、中低温及低温。(3)东天山存在一系列右旋韧性剪切带,中天山南北两缘韧性剪切带的构造变形与辛格尔断裂、兴地断裂等右旋韧性剪切带的变形以及塔里木北缘东部晚震旦—早古生代地层的同劈理褶皱变形、南天山泥盆纪地层的变形可能具成因联系。     

撒哈拉地台霍嘎地区某金矿地质特征

太古宙绿岩带是世界主要金矿赋存区,在古老的非洲地台分布很多绿岩带,其上叠加剪切带即伴随有含金建造的出现。本文根据安徽地矿"走出去"实施的某绿岩区金矿勘查资料、西霍嘎地块地质背景、区域上金矿赋存规律及邻区正在开采的金矿考察,初步分析了该区金矿地质特征、控矿要素、矿床成因及找矿标志,供后续勘查投资和周边中方相同地质背景矿权区找金参考。     

Kinematics and geochronology of multistage ductile deformation along the eastern Alxa block,NW China: New constraints on the relationship between the North China Plate and the Alxa block

The NE-trending Bayanwula Shan–Lang Shan is an important tectonic belt lying between the North China Plate (NCP) to the east and the Alxa block to the west. An understanding of its nature and the timing of deformation are essential to understand the relationship between the NCP and the Alxa block. Two phases of ductile deformation have been observed in this belt. Large-scale top-to-the-west ductile thrusting characterized the early deformation in the Bayanwula Shan–Lang Shan. Nearly east–west trending quartz stretching lineations and lineations formed by amphibole and biotite are well developed. Different types of sheath and oblique folds with east–west trending fold hinges are also developed in the region. The shear strain of this ductile thrust is up to 17. The ductile deformation may have resulted from the top-to-the-west thrusting of the northern part of the NCP over the Alxa block, and may have occurred ca. 351 Ma (biotite ⁴⁰Ar/³⁹Ar age). Later ductile deformation was expressed as NE-trending sinistral shear along the entire Bayanwula Shan–Lang Shan and likely occurred ca. 250 Ma (biotite and muscovite ⁴⁰Ar/³⁹Ar ages); this shear may have resulted from the collision between the Yangtze and North China plates to the south during the Triassic. Combined with recently obtained detrital zircon U–Pb ages for the area, the ductile deformation events in the eastern Alxa block indicate that the block may not have been part of the NCP, at least before the end of the Devonian. Both blocks were located in the Paleo-Asian Ocean during the Paleozoic and collided or amalgamated with each other at the end of the Devonian.     

基于构造解析重建的四川呷村银多金属矿床模型

四川省白玉县呷村银多金属矿床是中国著名的VHMS矿床之一,前人曾进行过详细的矿床模型研究。对于矿床下部脉状矿体大致呈层状平行于上部块状矿体的地质现象,前人曾提出"层状矿席+层控网脉状矿带"等模式。文章通过对呷村矿床地质特征的详细研究后认为,呷村矿床在印支期形成之后,遭受到燕山期弧-陆碰撞造山的强烈改造,导致矿区地层直立并倒转,并在能干性弱的流纹质火山岩中普遍发生层内韧性剪切变形,使原先近于垂直层状矿体和喷气沉积岩的下-中部脉状-网脉状矿体被构造置换为紧闭褶皱状、无根褶皱状、透镜体状,并近于平行于上部层状矿体。构造恢复表明,下-中部脉状-网脉状矿体原始三维形态为不整合的筒状或漏斗状,与上部层状矿体组成典型的"下筒上层"的"双层结构"。根据脉状-网脉状矿体和层状矿体的空间展布特征,在构造恢复的基础上重新建立了呷村VHMS矿床的双通道夹卤水池的矿床模型。该模型对矿区外围找矿有一定的指导意义。     

构造变形对煤储层孔隙结构与比表面积的影响研究

煤的孔隙结构和比表面积不仅影响煤层气吸附与储集能力,而且对气体渗流和扩散有重要的控制作用。通过对芦岭煤矿8,9煤层煤样低温液氮实验,对比分析了原生结构煤和不同变形强度构造煤的孔隙结构与比表面积的变化。结果表明,构造煤的比表面积和总孔体积平均值是原生结构煤的2.95倍和3.84倍。随着煤体韧性变形强度增加,构造煤的比表面积逐渐增大,微孔占比增加,小孔和中孔占比较少,总孔体积变化以糜棱煤为界呈现先增加后减小的特点。