双线偏振双波段（X／Ka）主被动微波遥感系统的研制与初步试验

为拓展主波，动生波探测系统遥感降水云雨的功能，使系统的原理先进性能有进一步的体现，将一套主被动双波段（X／Ka)微波遥感系统研制升级为双线偏振双波段主被动微波遥感系统。对新系统及主要部件的工作原理，技术指标及研制改造方法作了介绍，还给出了一些初步的观测结果。     

钢筋混凝土带暗支撑双功能剪力墙的力学计算模型

提出了钢筋混凝土带暗支撑双功能剪力墙结构。在试验研究基础上，建立了该体系的力学计算模型，计算结果与实测结果符合较好。     

新一代天气雷达

阐述了双偏振多普勒雷达的理论基础，以ＣＳＵ－ＣＨＩＬＬＳ波段双偏振多普勒天气雷达为例，介绍了双偏振多普勒雷达的系统结构和工作原理。并以雷达测量的数据处理和分析实例说明了双偏振多普勒雷达在气象学中的应用     

2D Coupled 3D:A New Numerical Model for Dual - Structured - Aquifer System

２Ｄ　Ｃｏｕｐｌｅｄ　３Ｄ：Ａ　Ｎｅｗ　Ｎｕｍｅｒｉｃａｌ　Ｍｏｄｅｌ　ｆｏｒＤｕａｌ－Ｓｔｒｕｃｔｕｒｅｄ－Ａｑｕｉｆｅｒ　Ｓｙｓｔｅｍ￥ＣｈｅｎＣｈｏｎｇｘｉ；ＦａｎｇＳｈｕｚｈｅｎ；ＬｉｎＭｉｎ（ＦａｃｕｌｔｙｏｆＥｎｖｉｒｏｎｍｅｎｔａｌＳｃ...     

VLBI观测双线极化条纹拟合方法

提出了一种可用于下一代VLBI观测系统(VGOS)的双线极化条纹拟合方法。现有的VLBI观测模式采用的是右圆极化(RCP),而VGOS系统采用的是双线极化。本文方法包括校正和组合条纹拟合两部分。校正部分选择一颗强源作为参考源,分别得到不同极化方式下的通道时延及相位校正数据,用于目标源的校正。组合条纹拟合部分将4种极化分量的可见度数据组合成伪Stokes分量,通过搜索差分星位角使伪Stokes分量的幅值达到最大,从而获得最终的时延观测量。与单极化条纹拟合相比,组合极化获得的条纹具有更高的信噪比(SNR)及更小的条纹相位弥散度。     

测井资料在碳酸盐岩洞—裂缝型储层产能评价中的应用

介绍了一种基于测井资料来预测双孔结构碳酸盐岩储层产能的新方法。首先根据碳酸盐岩剖面中双孔结构储层的地质和测井特征,提取与储层产能密切相关的多个测井和地质参数,考虑到这些参数与产能的非线性相关关系以及产能数据的变化特点,采用BP神经网络技术建立其储层产能的预测模型,由此处理了轮南地区的多口井测井资料。所预测的储层段产能与试油产能较为一致,效果良好。     

深部找矿与蒋氏TEM双定源回线装置方案

双定源回线装置的水平场Hx,其强度大、均匀,有利于探测深部陡倾斜金属矿藏,并可用作远距离井中测量的场源。此方案可用于危机矿山的找矿工作。     

Zircon U–Pb age and Hf isotope evidence for contrasting origin of bimodal protoliths for ultrahigh-pressure metamorphic rocks from the Chinese Continental Scientific Drilling project

A combined study of zircon morphology, U–Pb ages and Hf isotopes as well as whole‐rock major and trace elements was carried out for ultrahigh‐pressure (UHP) eclogite and felsic gneiss from the main hole (MH) of the Chinese Continental Scientific Drilling (CCSD) project in the Sulu orogen. The results show contrasting Hf isotope compositions for bimodal UHP metaigneous rocks, pointing to contrasting origins for their protoliths (thus dual‐bimodal compositions). The samples of interest were from two continuous core segments from CCSD MH at depths of 734.21–737.16 m (I) and 929.67–932.86 m (II) respectively. Zircon U–Pb dating for four samples from the two core segments yields two groups of ages at 784 ± 17 and 222 ± 3 Ma, respectively, corresponding to protolith formation during supercontinental rifting and metamorphic growth during continental collision. Although the Triassic UHP metamorphism significantly reset the zircon U–Pb system of UHP rocks, the Hf isotope compositions of igneous zircon can be used to trace their protolith origin. Contrasting types of initial Hf isotope ratios are, respectively, correlated with segments I and II, regardless of their lithochemistry. The first type shows positive ?_Hf(t) values of 7.8 ± 3.1 to 6.0 ± 3.0, with young Hf model age of 1.03 and 1.11 Ga. The second type exhibits negative ?_Hf(t) values of ?6.9 ± 1.6 to ?9.1 ± 1.1, with old Hf model ages of 2.11 and 2.25 Ga. It appears that the UHP rocks from the two segments have protoliths of contrasting origin. Consistent results are also obtained from their trace element compositions suggesting that mid‐Neoproterozoic protoliths of bimodal UHP metaigneous rocks formed during supercontinental rifting at the northern margin of the South China Block. Thus, the first type of bimodal magmatism formed by rapid reworking of juvenile crust, whereas the second type of bimodal magmatism was principally generated by rift anatexis of Paleoproterozoic crust. Melting of orogenic lithosphere has potential to bring about bimodal magmatism with contrasting origins. Because arc–continent collision zones are the best place to accumulate both juvenile and ancient crusts, the contrasting types of bimodal magmatism are proposed to occur in an arc–continent collision orogen during the supercontinental rifting, in response to the attempted breakup of the supercontinent Rodinia at c. 780 Ma.     

Experimental study and constitutive modelling of elasto‐plastic damage in heat‐treated mortar

This study investigates the effect of a heat‐treatment upon the thermo‐mechanical behaviour of a model cement‐based material, i.e. a normalized mortar, with a (w/c) ratio of 0.5. First, a whole set of varied experimental results is provided, in order to either identify or validate a thermo‐mechanical constitutive model, presented in the second paper part. Experimental responses of both hydraulic and mechanical behaviour are given after different heating/cooling cycling levels (105, 200, 300, 400^°C). The reference state, used for comparison purposes, is taken after mass stabilization at 60^°C. Typical uniaxial compression tests are provided, and original triaxial deviatoric compressive test responses are also given. Hydraulic behaviour is identified simultaneously to triaxial deviatoric compressive loading through gas permeability K_gas assessment. K_gas is well correlated with volumetric strain evolution: gas permeability increases hugely when ε_v testifies of a dilatant material behaviour, instead of contractile from the test start. Finally, the thermo‐mechanical model, based on a thermodynamics approach, is identified using the experimental results on uniaxial and triaxial deviatoric compression. It is also positively validated at residual state for triaxial deviatoric compression, but also by using a different stress path in lateral extension, which is at the origin of noticeable plasticity. Copyright © 2009 John Wiley & Sons, Ltd.     

Assessing the Measurement Consistency Between the Jason-2/AMR and SARAL/AltiKa/DFMR Microwave Radiometers Using Simultaneous Nadir Observations

SARAL/AltiKa has a Dual Frequency Microwave Radiometer (DFMR), and Jason-2 has an Advanced Microwave Radiometer (AMR). Both microwave radiometer sensors include a 23.8 GHz primary water sensing channel. The measurement consistencies between DFMR and AMR are important for establishing a consistent altimetry data set between SARAL/AltiKa and Jason-2 in order to accurately assess sea level rise in a long-term time series. This study investigates the measurement consistency in the 23.8 GHz channel between DFMR and AMR at the Simultaneous Nadir Overpasses (SNO's) between the two satellites and also at coldest ocean brightness temperature locations. Preliminary results show that while both instruments show no significant trends over the one year since the launch of SARAL, a consistent relative bias of 2.88 K (DFMR higher than AMR) with a standard deviation of 0.98 K is observed. The relative bias at the lowest brightness temperature from the SNO method (-3.82 K) is consistent with that calculated from coldest ocean method (-3.74 K). The relative bias exhibits strong latitude (and scene temperature) dependency, changing from -3.82 K at high latitudes to -0.92 K near the equator. There also exists an asymmetry between the northern and southern hemisphere. The relative bias increases toward the lower end of brightness temperature.